SIST ETS 300 086:1998/A2:1998

• Abstract:

  This together with ETS 300 279 is intended to become a harmonised standard, the reference of which is intended to be published in the Official Journal of the European Communities referencing the EMC Directive. This amendment implements the changes necessary to convert ETS 300 086 into a harmonised standard.

• Status: Published
• Publication Date: 30-Sep-1998
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.070.01 - Mobile services in general
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-1998
• Due Date: 01-Oct-1998
• Completion Date: 01-Oct-1998
• Mandate: T-353
• Ref Project: ETSI ETS 300 086/A2 ed.1 (1997-03) - Radio Equipment and Systems (RES); Land mobile group; Technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech

SIST ETS 300 086:1998/A2:1998 is the Slovenian adoption of ETS 300 086 Amendment 2 from ETSI. It covers Radio Equipment and Systems (RES) for the land mobile group, specifying technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech. The amendment also aligns the ETS with harmonized-standard use under the EMC Directive.

What does SIST ETS 300 086:1998/A2:1998 specify?

SIST ETS 300 086:1998/A2:1998 specifies the technical characteristics and test conditions for land mobile radio equipment intended primarily for analogue speech. It is aimed at equipment with an internal or external RF connector, so the document is relevant to conducted RF tests and approval checks.

The document is organized as an amendment to ETS 300 086. In this amendment, the foreword is revised, subclause 5.4.1 is replaced, figure 2 in subclause 7.7.2 is replaced, and two normative annexes are added.

Annex	What it covers
Annex D	Clauses relevant to compliance with essential requirements of Council Directive 89/336/EEC
Annex E	ERC Decision on national type approval regulations for land mobile equipment using angle modulation

What are the key requirements of SIST ETS 300 086:1998/A2:1998?

The amendment keeps the document focused on measurable radio performance, approval testing, and EMC-related parameters. In practice, it tells laboratories and approval bodies what to test, which setup to use, and which results must be recorded for type test reports and national approval use.

Temperature test conditions

Subclause 5.4.1 sets the extreme-temperature test range at -20 °C to +55 °C. It also allows a reduced range of 0 °C to +30 °C when the note to table 1 in 4.1.1 is relevant, and the type test report must state which range was used. This matters because the declared test range defines the environmental conditions under which performance is judged.

Measurement arrangement

Subclause 7.7.2 replaces figure 2 with a defined measurement arrangement using an interfering transmitter, terminations and attenuators, and a spectrum analyser. This matters because the setup standardizes how interference-related measurements are made, so test results are comparable between laboratories.

EMC-related parameters

Annex D lists the clauses relevant to the EMC Directive: spurious emissions, spurious radiations, spurious response rejection, and blocking or desensitisation. In practice, this tells conformity assessors which radio characteristics support EMC-related evidence.

National type approval use

Annex E reproduces the ERC Decision ERC/DEC/(95)02 on national type approval regulations for land mobile equipment using angle modulation. Annex 1 of that Decision lists the transmitter, receiver, and duplex-operation parameters from ETS 300 086 that are to be used in national approval rules. This matters because approval authorities can base national regulations on the same technical measurements.

Channel spacing and national options

The Decision’s annexes show that some parameters are linked to channel-spacing choices and temperature-range options. In practice, manufacturers need to match the relevant national option set before placing equipment on different markets.

Transmitter and receiver performance areas

The document framework covers transmitter limits such as frequency error, carrier power variation, effective radiated power, frequency deviation, adjacent-channel power, spurious emissions, intermodulation attenuation, and transient frequency behaviour. It also covers receiver items such as maximum usable sensitivity, amplitude characteristic, co-channel rejection, adjacent-channel selectivity, spurious response rejection, intermodulation response rejection, blocking or desensitisation, spurious radiations, and duplex-operation receiver limits. These are the core radio-performance checks that approval engineers use.

What terms does SIST ETS 300 086:1998/A2:1998 define?

• Radio Equipment and Systems (RES) - The ETSI technical area covering radio equipment and related system characteristics.
• ETSI - The European Telecommunications Standards Institute, which prepared the amendment.
• EMC Directive - Council Directive 89/336/EEC, the European directive linked here to harmonized-standard use.
• RF connector - A radio-frequency connector used to connect the equipment to test or antenna arrangements.
• Angle modulation - The modulation method referred to in the foreword and ERC Decision for the land mobile service equipment covered here.
• e.r.p. - Effective radiated power, a national-licensing and approval parameter mentioned in the ERC Decision.
• Type approval - The regulatory process used by administrations to accept equipment for national use.

Who uses SIST ETS 300 086:1998/A2:1998?

SIST ETS 300 086:1998/A2:1998 is used by radio equipment manufacturers, test laboratories, approval bodies, and national administrations. It is also relevant to operators and buyers of land mobile equipment who need to know which technical characteristics and approval conditions apply.

In practice, manufacturers use it to design and test analogue-speech mobile radios, laboratories use it for measurement methods and test conditions, and administrations use it for national type approval and licensing decisions. It is especially relevant where frequency planning, channel spacing, and EMC-related checks are part of the approval process.

What changed in SIST ETS 300 086:1998/A2:1998 from the previous edition?

SIST ETS 300 086:1998/A2:1998 modifies ETS 300 086 (1991). The amendment states these changes:

• The foreword is rewritten to identify ETSI as the preparing body and to link the document with ETS 300 279 for harmonized-standard use.
• The foreword adds the statement that angle modulation is used, while administrations may choose the modulation type and set licence conditions such as channel separations, maximum transmitter output power or e.r.p., transmitter intermodulation attenuation, and automatic transmitter shut-off.
• A sentence is added identifying annex D as the place where EMC-Directive-relevant technical specifications are listed.
• Annex E is added to reproduce the ERC Decision on national type approval regulations.
• Subclause 5.4.1 is replaced with the extreme-temperature test requirements.
• Figure 2 in subclause 7.7.2 is replaced with a revised measurement arrangement.

Which standards are used with SIST ETS 300 086:1998/A2:1998?

SIST ETS 300 086:1998/A2:1998 is paired in the foreword with ETS 300 279. The two documents are described together as intended to become a harmonized standard referencing the EMC Directive.

What does the SIST ETS 300 086:1998/A2:1998 document contain?

The document contains technical parameter tables for transmitter, receiver, and duplex-operation performance, plus a revised extreme-temperature test clause and a defined measurement arrangement for interference-related testing. It also contains annex D, which maps selected clauses to EMC-Directive requirements, and annex E, which reproduces the ERC Decision on national type approval regulations.

Annex E includes an annexed parameter list for national type approval and a table of national adoption options for channel spacing and temperature range. These parts are used for approval decisions, compliance testing, and documenting how national administrations apply the ETS.

SLOVENSKI STANDARD
01-oktober-1998
5DGLMVNDRSUHPDLQVLVWHPL5(66NXSLQD]DNRSHQVNHPRELOQHNRPXQLNDFLMH
7HKQLþQH]QDþLOQRVWLLQSUHVNXãDOQLSRJRML]DUDGLMVNRRSUHPR]QRWUDQMLPDOL
]XQDQMLP5)NRQHNWRUMHPQDPHQMHQRSUHGYVHPDQDORJQHPXSUHQRVXJRYRUD
Radio Equipment and Systems (RES); Land mobile group; Technical characteristics and
test conditions for radio equipment with an internal or external RF connector intended
primarily for analogue speech
Ta slovenski standard je istoveten z: ETS 300 086/A2 Edition 1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETS 300 086
AMENDMENT A2
March 1997
Source: ETSI TC-RES Reference: RE/RES-02025
ICS: 33.020
Key words: Mobile, radio, speech, testing
This amendment A2 modifies
the European Telecommunication Standard ETS 300 086 (1991)
Radio Equipment and Systems (RES);
Land mobile group;
Technical characteristics and test conditions for radio
equipment with an internal or external RF connector
intended primarily for analogue speech
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

Page 2
ETS 300 086: January 1991/A2: March 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

Page 3
ETS 300 086: January 1991/A2: March 1997
Foreword
This amendment to ETS 300 086 (1991) has been produced by the Radio Equipment and Systems (RES)
Technical Committee of the European Telecommunications Standards Institute (ETSI).
ETS 300 086 as amended by this amendment, together with ETS 300 279 is intended to become a
Harmonized Standard the reference of which is intended to be published in the Official Journal of the
European Communities, referencing Council Directive 89/336/EEC (EMC Directive).
Annex E contains the ERC Decision which references the technical specifications in this ETS for inclusion
in national approval regulations.
Transposition dates
Date of adoption: 21 February 1997
Date of latest announcement of this ETS (doa): 30 June 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 December 1997
Date of withdrawal of any conflicting National Standard (dow): 31 December 1997

Page 4
ETS 300 086: January 1991/A2: March 1997
Amendments
Page 7, Foreword
Replace the first paragraph with the following:
This European Telecommunication Standard (ETS) has been prepared by the Radio Equipment and
Systems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS, together with ETS 300 279 is intended to become a Harmonized Standard the reference of
which is intended to be published in the Official Journal of the European Communities, referencing
Council Directive 89/336/EEC (EMC Directive).
Replace third paragraph with:
Angle modulation is used for radio equipment covered by this ETS, but individual national administrations
are free to choose the type of modulation. Channel separations, maximum transmitter output power /
effective radiated power, class of transmitter intermodulation attenuation and the inclusion of automatic
transmitter shut-off facility may all be conditions relating to the issue of a licence by the appropriate
administration.
Insert the following after the last paragraph:
The technical specifications which are relevant to the EMC Directive are listed in annex D.
Annex E contains the ERC Decision ( ), dated 1995, which references the technical
ERC/DEC/(95)02
specifications in ETS 300 086 for inclusion in national type approval regulations.
Page 23, subclause 5.4.1
Replace entire subclause with:
For tests at extreme temperatures, measurements shall be made in accordance with the procedures
specified in subclause 5.5, at the upper and lower temperatures of the following range:
-20 °C to + 55 °C.
For the purpose of note (a) to table 1 in subclause 4.1.1, an additional reduced extreme temperature
range of 0 °C to + 30 °C shall be used when appropriate.
Type test reports shall state the temperature range used.
Page 32, subclause 7.7.2
Replace figure 2 with:
Interfering
T ra ns m itte r
50 Ω 10 dB
50 Ω 20 dB
te st signal
under test
source
50 Ω term ination
50 Ω attenuator
Sp ec trum
an alyse r
Figure 2: Measurement arrangement

Page 5
ETS 300 086: January 1991/A2: March 1997
Page 58
Insert the following before History:
Annex D (normative): ETS 300 086 Radio Equipment and Systems (RES);
Land mobile group; Technical characteristics and test
conditions for radio equipment with an internal or
external RF connector intended primarily for analogue
speech
Table D.1: Clauses and/or subclauses of this ETS relevant for compliance with essential
requirements of the EC Council Directives
Clause/subclause number and title Corresponding article Qualifying
of Council Directive remarks
89/336/EEC
4.1.6 Spurious emissions 4(a)
4.2.9 Spurious radiations 4(a)
4.2.6 Spurious response rejection 4(b)
4.2.8 Blocking or desensitisation 4(b)

Page 6
ETS 300 086: January 1991/A2: March 1997
Annex E (normative): ERC Decision of 1st December 1995 on the adoption of
national type approval regulations for equipment to be
used in the land mobile service using angle modulation
based on the European Telecommunications Standard
(ETS) 300 086 (ERC/DEC/(95)02)
This annex contains the ERC Decision (ERC/DEC/(95)02), dated 1995, which references the technical
specifications in ETS 300 086 [2] for inclusion in national type approval regulations.

ERC/DEC/(95)02
EUROPEAN RADIOCOMMUNICATIONS COMMITTEE
ERC Decision
of 1st December 1995
on the adoption of national type approval regulations for
equipment to be used in
the land mobile service using angle modulation
based on the European Telecommunications Standard
(ETS) 300 086
(ERC/DEC/(95)02)
CONFERENCE OF EUROPEAN POSTAL AND TELECOMMUNICATIONS ADMINISTRATIONS

Copyright 1995 the European Conference of Postal and Telecommunications Administrations (CEPT)

ERC/DEC/(95)02
Page 1
EXPLANATORY MEMORANDUM
1. INTRODUCTION
The free movement of radiocommunications goods and the provision of Europe-wide services for
radiocommunications are only achievable if there exist common regulations throughout Europe regarding
availability of frequency bands, type approval requirements and border crossing procedures. A basic requirement to
fulfil these objectives is the Europe-wide implementation of national regulations based on the European
Telecommunications Standards (ETSs) developed by the European Telecommunications Standards Institute (ETSI).
This Decision (ERC/DEC/(95)02) provides the necessary mechanism for CEPT administrations to commit
themselves to implement, within their national regimes, European Telecommunications Standard 300 086 and
withdraw any conflicting national standard.

2. BACKGROUND
Both the ERC and ETSI are involved in the development of common regulations, as described in (1) above. The
Memorandum of Understanding between ERC and ETSI explains the respective responsibilities of the two
organisations and its annex describes the principles of cooperation. The ERC, for its part, should, inter alia, adopt
Decisions on the introduction of ETSI standards into national t
...