SIST EN 300 086-2:2001

• Abstract:

  To incorporate the text and tables corresponding to the sought change of status of the standard

• Status: Published
• Publication Date: 31-Aug-2001
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.070.01 - Mobile services in general
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2001
• Due Date: 01-Sep-2001
• Completion Date: 01-Sep-2001
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Directive:

  ---

  2010-01-3290 - Pravilnik o železniškem telekomunikacijskem omrežju
• Mandate: M/284
• Ref Project: ETSI EN 300 086-2 V1.1.1 (2001-03) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

• Official Journal Project Relation: SIST EN 300 086-2 V1.2.1:2008 - Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service - Radio equipment with an internal or external RF connector intended primarily for analogue speech - Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
• Effective Date: 06-Jan-2010
• Official Journal Project Relation: SIST EN 300 086-2:2001 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
• Effective Date: 17-Nov-2009

SIST EN 300 086-2:2001 is the Slovenian standard published by SIST that adopts the European Telecommunications Standards Institute (ETSI) standard EN 300 086-2 for land mobile radio equipment with an internal or external RF connector intended primarily for analogue speech. It specifies the harmonized essential requirements for use of the radio spectrum under article 3.2 of the R&TTE Directive, for base stations, mobile stations and hand portable stations operating from 30 MHz to 1000 MHz. Engineers, test labs and conformity assessors use it to verify transmitter, receiver and test conditions.

What does SIST EN 300 086-2:2001 specify?

SIST EN 300 086-2:2001 applies to angle modulation systems for the land mobile service with channel separations of 12.5 kHz, 20 kHz and 25 kHz. It covers equipment with an antenna socket, and hand portable stations with either an antenna socket or an internal 50 Ω RF connector that gives access to transmitter output and receiver input.

The document is organized into five clauses: scope, references, definitions/symbols/abbreviations, technical specifications, and testing for compliance with technical requirements. The introduction also shows the modular structure used under the R&TTE Directive, and the end of the document includes history information.

What are the key requirements of SIST EN 300 086-2:2001?

Transmitter and receiver performance

• Clause 4.1 ties the technical requirements to the equipment’s environmental class. In practice, the radio has to meet the limits in the declared operating environment, not only in ideal lab conditions.
• Clauses 4.2.1 to 4.2.8 cover transmitter limits for frequency error, carrier power (conducted), effective radiated power, maximum frequency deviation, adjacent channel power, spurious emissions, intermodulation attenuation and transient frequency behaviour. These controls matter because they limit unwanted radiation and keep the transmitter inside its assigned channel.
• Clauses 4.3.1 to 4.3.10 cover receiver performance, including maximum usable sensitivity, co-channel rejection, adjacent channel selectivity, spurious response rejection, intermodulation response rejection, blocking or desensitization, spurious radiations, and duplex desensitization and spurious response rejection. In practice, these checks show whether the receiver can still work when other signals are present nearby.
• For both transmitter and receiver requirements, the limits and measurement methods are taken from EN 300 086-1. That means this part sets the pass/fail framework while Part 1 supplies the detailed test definitions.

Testing and conformity assessment

• Clause 5.1 requires testing under normal test conditions and, where stated, extreme test conditions, using the procedures in EN 300 086-1. The test power source must also meet the corresponding clause in EN 300 086-1.
• Clause 5.1.3 links testing to the sample selection rules in EN 300 086-1. This matters because the samples used for the test suite have to represent the equipment being assessed.
• Clause 5.2 says the measured value is compared with the relevant limit to decide compliance, and the test report must include measurement uncertainty. The uncertainty has to stay within the levels in table 1 and be calculated according to ETR 028 with the stated coverage factor.
• Clauses 5.3 and 5.4 list the essential radio test suites and the other radio test suites. Each suite points to a specific measurement method in EN 300 086-1, so a laboratory can follow the document step by step.

What terms does SIST EN 300 086-2:2001 define?

The document uses definitions, symbols and abbreviations from the R&TTE Directive and EN 300 086-1.

• Environmental profile - the operating conditions associated with the equipment’s environmental class.
• Frequency error - the difference between the transmitter’s actual frequency and its nominal frequency.
• Carrier power (conducted) - the transmitter power measured at the RF output path.
• Effective radiated power - the power radiated by the antenna system in the direction of maximum radiation.
• Maximum frequency deviation - the largest shift in carrier frequency caused by modulation.
• Adjacent channel power - unwanted transmitter power that falls into nearby channels.
• Co-channel rejection - the receiver’s ability to handle a wanted signal when another signal is present on the same channel.
• Blocking or desensitization - loss of receiver sensitivity caused by a strong unwanted signal.

Who uses SIST EN 300 086-2:2001?

SIST EN 300 086-2:2001 is used by manufacturers of land mobile radio equipment, test laboratories, and conformity assessment bodies working on analogue-speech radios with RF connectors. It is also relevant to quality managers, procurement teams and regulators who need a clear radio-spectrum compliance basis for base stations, mobile stations and hand portable stations.

Which standards are used with SIST EN 300 086-2:2001?

• Directive 1999/5/EC - provides the R&TTE Directive article 3.2 essential requirement that the standard addresses.
• EN 300 086-1 - supplies the technical characteristics, definitions, measurement methods, limits and test procedures used throughout this part.
• ETR 028 - is used for calculating measurement uncertainty in the compliance testing clause.

What does the SIST EN 300 086-2:2001 document contain?

The document contains requirement clauses for transmitter and receiver performance, followed by compliance testing provisions. It includes a figure in the introduction that explains the modular structure used under the R&TTE Directive. Clause 4 gives the definitions, limits and measurement references for each radio parameter, and clause 5 gives the test conditions, uncertainty rules and test suites. Table 1 lists the maximum measurement uncertainties used for conformity decisions.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.99Drugi vidiki v zvezi z EMCOther aspects related to EMCICS:Ta slovenski standard je istoveten z:EN 300 086-2 Version 1.1.136IST EN 300 086-2:2001en01-MXOLM-20013SIST EN 300 086-2:2001SLOVENSKI
STANDARD
DraftETSIEN300086-2V1.1.1(2000-02)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);LandMobileService;RadioequipmentwithaninternalorexternalRFconnectorintendedprimarilyforanaloguespeech;Part2:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 086-2:2001

ETSIDraftETSIEN300086-2V1.1.1(2000-02)2ReferenceREN/ERM-RP02-41-2Keywordsanalogue,mobile,radio,regulation,speechETSIPostaladdressF-06921SophiaAntipolisCedex-FRANCEOfficeaddress650RoutedesLucioles-SophiaAntipolisValbonne-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/[e-mail]ETSIdeliverablecanbedownloadedfromhttp://www.etsi.orgIfyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]Ideliverablemaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.CopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 086-2:2001

ETSIDraftETSIEN300086-2V1.1.1(2000-02)3ContentsIntellectualPropertyRights.4Foreword.4Introduction.51Scope.72References.73Definitions,symbolsandabbreviations.83.1Definitions.83.2Symbols.83.3Abbreviations.84Technicalrequirementsspecifications.84.1Transmitterrequirements.84.1.1Frequencyerror.84.1.2Carrierpower(conducted).84.1.3Effectiveradiatedpower.84.1.4Maximumfrequencydeviation.84.1.5Adjacentchannelpower.84.1.6Spuriousemissions.84.1.7Intermodulationattenuation.94.1.8Transientfrequencybehaviourofthetransmitter.94.2Receiverparameters.94.2.1Maximumusablesensitivity.94.2.2Maximumusablesensitivity(fieldstrength).94.2.3Co-channelrejection.94.2.4Adjacentchannelselectivity.94.2.5Spuriousresponserejection.94.2.6Intermodulationresponserejection.94.2.7Blockingordesensitization.94.2.8Spuriousradiations.94.2.9Desensitizationandsensitivity(duplex).104.2.10Spuriousresponserejection(duplex).105Testingforcompliancewithtechnicalrequirements.105.1Essentialradiotestsuites.105.1.1Environmentalconditionsfortesting.105.1.1.1Normalandextremetest-conditions.105.1.1.2Testpowersource.105.1.2Choiceofsamplesfortestsuites.105.1.3Transmittertestsuites.105.1.3.1Frequencyerror.105.1.3.2Carrierpower(conducted).105.1.3.3Effectiveradiatedpower.105.1.3.4Maximumfrequencydeviation.105.1.3.5Adjacentchannelpower.105.1.3.6Spuriousemissions.115.1.3.7Intermodulationattenuation.115.1.3.8Transientfrequencybehaviourofthetransmitter.115.2Othertestspecifications.11History.12SIST EN 300 086-2:2001

ETSIDraftETSIEN300086-2V1.1.1(2000-02)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinSR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinSR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM),andisnowsubmittedforthePublicEnquiryphaseoftheETSIstandardsTwo-stepApprovalProcedure.Thepresentdocumentispart2ofamulti-partENcoveringtheElectromagneticcompatibilityandradioSpectrumMatters(ERM);Landmobileservice;RadioequipmentwithaninternalorexternalRFconnectorintendedprimarilyforanaloguespeech,asidentifiedbelow:Part1:"Technicalcharacteristicsandtestconditions";Part2:"HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective".ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EClayingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.ThepresentdocumentisintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommuni
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.01Mobilni servisi na splošnoMobile services in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 086-2 Version 1.1.1SIST EN 300 086-2:2001en01-september-2001SIST EN 300 086-2:2001SLOVENSKI
STANDARD
ETSIEN300086-2V1.1.1(2001-03)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);LandMobileService;RadioequipmentwithaninternalorexternalRFconnectorintendedprimarilyforanaloguespeech;Part2:HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirectiveSIST EN 300 086-2:2001

ETSIETSIEN300086-2V1.1.1(2001-03)2ReferenceREN/ERM-RP02-041-2Keywordsanalogue,antenna,mobile,PMR,radio,regulation,speechETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 086-2:2001

ETSIETSIEN300086-2V1.1.1(2001-03)3ContentsIntellectualPropertyRights.5Foreword.5Introduction.61Scope.82References.83Definitions,symbolsandabbreviations.93.1Definitions.93.2Symbols.93.3Abbreviations.94Technicalspecifications.94.1Environmentalprofile.94.2Transmitterrequirements.94.2.1Frequencyerror.94.2.1.1Definition.94.2.1.2Limit.94.2.1.3Methodofmeasurement.94.2.2Carrierpower(conducted).94.2.2.1Definition.94.2.2.2Limit.94.2.2.3Methodofmeasurement.104.2.3Effectiveradiatedpower.104.2.3.1Definition.104.2.3.2Limit.104.2.3.3Methodofmeasurement.104.2.4Maximumfrequencydeviation.104.2.4.1Definition.104.2.4.2Limit.104.2.4.3Methodofmeasurement.104.2.5Adjacentchannelpower.104.2.5.1Definition.104.2.5.2Limit.104.2.5.3Methodofmeasurement.104.2.6Spuriousemissions.104.2.6.1Definition.104.2.6.2Limit.104.2.6.3Methodofmeasurement.114.2.7Intermodulationattenuation.114.2.7.1Definition.114.2.7.2Limit.114.2.7.3Methodofmeasurement.114.2.8Transientfrequencybehaviourofthetransmitter.114.2.8.1Definition.114.2.8.2Limit.114.2.8.3Methodofmeasurement.114.3Receiverrequirements.114.3.1Maximumusablesensitivity(speech,conducted).114.3.1.1Definition.114.3.1.2Limit.114.3.1.3Methodofmeasurement.114.3.2Maximumusablesensitivity(speech,fieldstrength).124.3.2.1Definition.124.3.2.2Limit.124.3.2.3Methodofmeasurement.12SIST EN 300 086-2:2001

ETSIETSIEN300086-2V1.1.1(2001-03)44.3.3Co-channelrejection.124.3.3.1Definition.124.3.3.2Limit.124.3.3.3Methodofmeasurement.124.3.4Adjacentchannelselectivity.124.3.4.1Definition.124.3.4.2Limit.124.3.4.3Methodofmeasurement.124.3.5Spuriousresponserejection.124.3.5.1Definition.124.3.5.2Limit.124.3.5.3Methodofmeasurement.124.3.6Intermodulationresponserejection.134.3.6.1Definition.134.3.6.2Limit.134.3.6.3Methodofmeasurement.134.3.7Blockingordesensitization.134.3.7.1Definition.134.3.7.2Limit.134.3.7.3Methodofmeasurement.134.3.8Spuriousradiations.134.3.8.1Definition.134.3.8.2Limit.134.3.8.3Methodofmeasurement.134.3.9Desensitizationandsensitivity(duplex).134.3.9.1Definition.134.3.9.2Limit.134.3.9.3Methodofmeasurement.134.3.10Spuriousresponserejection(duplex).144.3.10.1Definition.144.3.10.2Limit.144.3.10.3Methodofmeasurement.145Testingforcompliancewithtechnicalrequirements.145.1Environmentalconditionsfortesting.145.1.1Normalandextremetest-conditions.145.1.2Testpowersource.145.1.3Choiceofsamplesfortestsuites.145.2Interpretationofthemeasurementresults.145.3Essentialradiotestsuites.155.3.1Frequencyerror.155.3.2Carrierpower(conducted).155.3.3Effectiveradiatedpower.155.3.4Maximumfrequencydeviation.155.3.5Adjacentchannelpower.155.3.6Spuriousemissions.155.3.7Intermodulationattenuation.155.3.8Transientfrequencybehaviourofthetransmitter.165.4Otherradiotestsuites.165.4.1Maximumusablesensitivity(speech,conducted).165.4.2Maximumusablesensitivity(speech,fieldstrength).165.4.3Co-channelrejection.165.4.4Adjacentchannelselectivity.165.4.5Spuriousresponserejection.165.4.6Intermodulationresponserejection.165.4.7Blockingordesensitization.165.4.8Spuriousradiations.165.4.9Desensitizationandsensitivity(duplex).165.4.10Spuriousresponserejection(duplex).
...