SIST EN 50342-4:2009
(Main)Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
This European Standard is applicable to lead-acid batteries used for heavy vehicles. The object of this European Standard is to specify the European requirements of the main dimensions of starter batteries. For new and future developments of the above applications it is strongly recommended that only batteries from the "Preferred Types" series be used. Batteries of the series of "Other Types" exist under several national standards. They have been transferred from the previous standard EN 60095-4. The preferred types A, B and C are newly introduced and correspond closely to the types D4, D5 and D6 with some differences in tolerances and dimensions.
Blei-Akkumulatoren-Starterbatterien - Teil 4: Maße von Nutzkraftwagen-Batterien
Batteries de démarrage au plomb - Partie 4: Dimensions des batteries pour poids lourds
Cette partie de la CEI est applicable aux batteries au plomb prévues pour le démarrage, l'éclairage et l'allumage des poids lourds, véhicules commerciaux, autobus et engins agricoles. Cette seconde édition annule et remplace la première édition publiée en 1989 et son Amendement 1 (1996). Elle constitue une révision technique. Les principaux changements techniques dans cette nouvelle édition concernent la réduction du nombres de types de batteries européennes, la normalisation des dimensions et les emplacements des bornes de batteries ainsi que la mise à jour et l'introduction dans la norme de l'Amendement 1 (1996) en relation avec les types de batteries d'Amérique du nord et d'Asie de l'Est.
Svinčeno-kislinske zagonske baterije - 4. del: Mere baterij za težka komercialna vozila
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YR]LODBlei-Akkumulatoren-Starterbatterien - Teil 4: Maße von Nutzkraftwagen-BatterienBatteries de démarrage au plomb - Partie 4: Dimensions des batteries pour poids lourdsLead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles29.220.20EDWHULMHAcid secondary cells and batteriesICS:Ta slovenski standard je istoveten z:EN 50342-4:2009SIST EN 50342-4:2009en,fr,de01-september-2009SIST EN 50342-4:2009SLOVENSKI
STANDARDSIST EN 60095-4:1997/A11:1997SIST EN 60095-4:19971DGRPHãþD
SIST EN 50342-4:2009
EUROPEAN STANDARD EN 50342-4 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50342-4:2009 E
ICS 29.220.20 Supersedes EN 60095-4:1993 + A11:1994
English version
Lead-acid starter batteries -
Part 4: Dimensions of batteries for heavy vehicles
Batteries d'accumulateurs
de démarrage au plomb -
Partie 4: Dimensions des batteries
pour poids lourds
Blei-Akkumulatoren-Starterbatterien -
Teil 4: Maße von
Nutzkraftwagen-Batterien
This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 50342-4:2009
EN 50342-4:2009 – 2 – Foreword This European Standard was prepared by the Technical Committee CENELEC TC 21X, Secondary cells and batteries. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50342-4 on 2009-07-01. This European Standard supersedes EN 60095-4:1993 + A11:1994. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-07-01 – latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 __________ SIST EN 50342-4:2009
– 3 – EN 50342-4:2009
Contents 1 Scope and object . 4 2 Normative references. 4 3 Definitions . 4 4 General requirements . 5 4.1 Safety labelling . 5 4.2 Marking . 5 4.3 Recycling . 5 4.4 Dimensions and design . 6 4.5 Dimensions of terminals . 6 5 Preferred types . 7 5.1 General . 7 5.2
Dimension table for types D2, A, B, C . 7 5.3
Figures for types D2, A, B, C .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.