Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate

This document specifies a test method for assessing film extensibility by indentation of a coating on a defined and carefully selected wooden extensibility substrate for coatings on stable wood components in exterior use. The method is preferably be used on coatings that have not been exposed to weathering.

Beschichtungsstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im Außenbereich - Beurteilung der Verformbarkeit durch Eindrücken einer Beschichtung auf einem Holzsubstrat

Dieses Dokument legt ein Prüfverfahren zum Beurteilen der Verformbarkeit durch Eindrücken einer Beschichtung auf einem definierten und sorgfältig ausgewählten Holzsubstrat für Beschichtungen auf maßhaltigen Holzbauteilen im Außenbereich fest. Das Verfahren ist vorzugsweise für Beschichtungen zu verwenden, die nicht bewittert wurden.

Peintures et vernis - Produits de peintures et systèmes de peintures pour bois en extérieur - Évaluation de l'extensibilité du feuil par poinçonnement d'un revêtement sur un support en bois

Le présent document spécifie une méthode d’essai pour évaluer l’extensibilité du feuil par poinçonnement d’un revêtement sur un subjectile en bois défini et choisi avec soin, pour des revêtements sur des éléments de bois stable, pour usage en extérieur. Il est préférable d'appliquer la méthode à des revêtements n’ayant pas été exposés aux intempéries.

Barve in laki - Premazi in premazni sistemi za zaščito lesa za zunanjo uporabo - Ocenjevanje razteznosti filma z vtiskovanjem premaza na leseni podlagi

General Information

Status
Published
Public Enquiry End Date
01-Apr-2021
Publication Date
16-Aug-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Jul-2021
Due Date
15-Sep-2021
Completion Date
17-Aug-2021

Relations

Buy Standard

Technical specification
TS CEN/TS 16360:2021
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 16360:2021
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16360:2021
01-september-2021
Nadomešča:
SIST-TS CEN/TS 16360:2012
Barve in laki - Premazi in premazni sistemi za zaščito lesa za zunanjo uporabo -
Ocenjevanje razteznosti filma z vtiskovanjem premaza na leseni podlagi
Paints and varnishes - Coating materials and coating systems for exterior wood -
Assessment of film extensibility by indentation of a coating on a wooden substrate
Beschichtungsstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im
Außenbereich - Beurteilung der Verformbarkeit durch Eindrücken einer Beschichtung auf
einem Holzsubstrat
Peintures et vernis - Produits de peintures et systèmes de peintures pour bois en
extérieur - Évaluation de l'extensibilité du feuil par poinçonnement d'un revêtement sur
un support en bois
Ta slovenski standard je istoveten z: CEN/TS 16360:2021
ICS:
71.100.50 Kemikalije za zaščito lesa Wood-protecting chemicals
87.040 Barve in laki Paints and varnishes
SIST-TS CEN/TS 16360:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16360:2021

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16360:2021


CEN/TS 16360
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

June 2021
TECHNISCHE SPEZIFIKATION
ICS 87.040 Supersedes CEN/TS 16360:2012
English Version

Paints and varnishes - Coating materials and coating
systems for exterior wood - Assessment of film
extensibility by indentation of a coating on a wooden
substrate
Peintures et vernis - Produits de peinture et systèmes Beschichtungsstoffe - Beschichtungsstoffe und
de peinture pour bois en extérieur - Évaluation de Beschichtungssysteme für Holz im Außenbereich -
l'extensibilité du feuil par poinçonnement d'un Beurteilung der Verformbarkeit durch Eindrücken
revêtement sur un support en bois einer Beschichtung auf einem Holzsubstrat
This Technical Specification (CEN/TS) was approved by CEN on 16 May 2021 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16360:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16360:2021
CEN/TS 16360:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
6 Procedure. 7
6.1 Wood panels .
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 16360:2021
01-marec-2021
Barve in laki - Premazi in premazni sistemi za zaščito lesa za zunanjo uporabo -
Ocenjevanje razteznosti filma z vtiskovanjem premaza na leseni podlagi
Paints and varnishes - Coating materials and coating systems for exterior wood -
Assessment of film extensibility by indentation of a coating on a wooden substrate
Beschichtungsstoffe - Beschichtungsstoffe und Beschichtungssysteme für Holz im
Außenbereich - Beurteilung der Verformbarkeit durch Eindrücken einer Beschichtung auf
einem Holzsubstrat
Peintures et vernis - Produits de peintures et systèmes de peintures pour bois en
extérieur - Évaluation de l'extensibilité du feuil par poinçonnement d'un revêtement sur
un support en bois
Ta slovenski standard je istoveten z: FprCEN/TS 16360
ICS:
71.100.50 Kemikalije za zaščito lesa Wood-protecting chemicals
87.040 Barve in laki Paints and varnishes
kSIST-TS FprCEN/TS 16360:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 16360:2021

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 16360:2021


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 16360
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

January 2021
ICS 87.040 Will supersede CEN/TS 16360:2012
English Version

Paints and varnishes - Coating materials and coating
systems for exterior wood - Assessment of film
extensibility by indentation of a coating on a wooden
substrate
Peintures et vernis - Produits de peintures et systèmes Beschichtungsstoffe - Beschichtungsstoffe und
de peintures pour bois en extérieur - Évaluation de Beschichtungssysteme für Holz im Außenbereich -
l'extensibilité du feuil par poinçonnement d'un Beurteilung der Verformbarkeit durch Eindrücken
revêtement sur un support en bois einer Beschichtung auf einem Holzsubstrat


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 139.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 16360:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 16360:2021
FprCEN/TS 16360:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
6 Procedure. 7
6.1 Wood panels . 7
6.2 Coating application .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.