SIST EN 15191:2010
(Main)Precast concrete products - Classification of glass-fibre reinforced concrete performances
Precast concrete products - Classification of glass-fibre reinforced concrete performances
This European Standard deals with the classification of glassfibre reinforced concrete. This classification conforms to the needs of the design process of glassfibre reinforced concrete components. This European Standard applies only if EN 1169 is followed. This standard does not deal with design methods.
Betonfertigteile - Klassifizierung der Leistungseigenschaften von Glasfaserbeton
Diese Europäische Norm behandelt die Klassifizierung von Glasfaserbeton. Die Klassifizierung des Werkstoffes bildet die Grundlage für die Bemessung von Bauteilen aus Glasfaserbeton. Diese Europäische Norm gilt nur bei Einhaltung der Norm EN 1169.
Diese Norm behandelt keine Bemessungsverfahren.
Produits préfabriqués en béton - Classification des performances des composites ciment-verre
La présente Norme européenne traite de la classification des composites ciment-verre. Cette classification
répond aux besoins du processus de conception des éléments de composites ciment-verre. La présente
Norme européenne s'applique uniquement si l’EN 1169 est respectée.
La présente norme ne traite pas des méthodes de calcul.
Montažni betonski izdelki - Klasifikacija lastnosti steklocementnega kompozita
Ta evropski standard se ukvarja s klasifikacijo steklocementnega kompozita. Ta klasifikacija je skladna s potrebami procesa načrtovanja sestavnih delov steklocementnega kompozita. Ta evropski standard velja samo, če sledi EN 1169. Ta standard se ne ukvarja z metodami načrtovanja.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Montažni betonski izdelki - Klasifikacija lastnosti steklocementnega kompozitaBetonfertigteile - Klassifizierung der Leistungseigenschaften von GlasfaserbetonProduits préfabriqués en béton - Classification des performances des composites ciment-verrePrecast concrete products - Classification of glass-fibre reinforced concrete performances91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 15191:2009SIST EN 15191:2010en,fr,de01-april-2010SIST EN 15191:2010SLOVENSKI
STANDARD
SIST EN 15191:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15191
December 2009 ICS 91.100.30 English Version
Precast concrete products - Classification of glassfibre reinforced concrete performance
Produits préfabriqués en béton - Classification des performances des composites ciment-verre
Betonfertigteile - Klassifizierung der Leistungseigenschaften von Glasfaserbeton This European Standard was approved by CEN on 1 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15191:2009: ESIST EN 15191:2010
EN 15191:2009 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Definitions and abbreviations .63.1Terms and definitions .63.2Symbols and abbreviated terms .84Properties of glassfibre reinforced concrete .84.1Characteristics of composite material.84.2Composition of GRC.84.3Performance .94.3.1GRC using spray or premixing processes .94.3.2GRC with oriented fibres . 105Classification of GRC . 105.1Classification according to mechanical properties . 105.2Application-specific values . 105.3Material classes . 115.3.1Classification parameters . 115.3.2Specification of the parameters . 115.4Application specific parameter . 126Special properties . 127Test methods . 127.1Application class . 127.2Requirements of glassfibre . 13Bibliography . 14 SIST EN 15191:2010
EN 15191:2009 (E) 3 Foreword This document (EN 15191:2009) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15191:2010
EN 15191:2009 (E) 4 Introduction The classification covers all GRC formulation and production processes. The properties of GRC depend on: a) the constituent materials used; b) the composition of glassfibre reinforced concrete; c) the production processes. The classification of GRC is based on the material properties that can be achieved. SIST EN 15191:2010
EN 15191:2009 (E) 5 1 Scope This European Standard deals with the classification of glassfibre reinforced concrete. This classification conforms to the needs of the design process of glassfibre reinforced concrete components. This European Standard applies only if EN 1169 is followed. This standard does not deal with design methods. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement — Part 1: Determination of strength EN 196-2, Methods of testing cement — Part 2: Chemical analysis of cement EN 1170-4, Precast concrete products — Test method for glass-fibre reinforced cement — Part 4: Measuring bending strength, "Simplified bending test" method EN 1170-5, Precast concrete products — Test method for glass-fibre reinforced cement — Part 5: Measuring bending strength, “Complete bending test” method EN 1170-6, Precast concrete products — Test method for glass-fibre reinforced cement — Part 6: Determination of the absorption of water by immersion and determination of the dry density EN 1170-7, Precast concrete products — Test method for glass-fibre reinforced cement — Part 7: Measurement of extremes dimensional variations due to moisture content EN 1170-8, Test method for glass-fibre reinforced cement — Part 8: Cyclic weathering type test EN 1339, Concrete paving flags — Requirements and test methods EN 13198, Precast concrete products — Street furniture and garden products EN 13501-1, Fire classification of construction products and building elements — Part 1 : Classification using data from reaction to fire tests EN 14649, Precast concrete products — Test method for strength retention of glass fibres in cement and concrete (SIC TEST) EN 15422, Precast concrete products — Specification of glassfibres for reinforcement of mortars and concretes EN ISO 6946, Building components and building elements — Thermal resistance and thermal transmittance — Calculation method (ISO 6946:2007) ISO 12491:1997, Statistical methods for quality control of building materials and components SIST EN 15191:2010
EN 15191:2009 (E) 6 3 Definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 addition product that may be added by weight or volume/weight to the matrix composition to improve some properties NOTE 1 An addition can be reactive or inert, mineral or organic. NOTE 2 Silica fumes are reactive and polymer dispersions are organic. 3.1.2 admixture product added in quantity less than 5 % by weight), before or during mixing and giving expected modifications to the initial and final properties NOTE The quantity of admixture is related to the mass of cement. The properties are for example: workability, air content. 3.1.3 AR glassfibre glassfibre product with a proven resistance to the alkaline environment of matrices made from hydraulic cement 3.1.4 basic strand glassfibre obtained by stranding a number of filaments having a defined individual diameter NOTE Number of filaments: typically 100 to 200; individual diameter: typically 10 µm to 30 µm. 3.1.5 roving number of parallel strands wound together on a mandrel to form uniform cylindrical package size 3.1.6 glassfibre reinforced concrete GRC composite material consisting of a matrix reinforced with glassfibres, these materials being compatible 3.1.7 matrix part of GRC which is not fibres, normally composed of sand, cement, wate
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.