Low-voltage power supply devices, d.c. output - Performance characteristics

EN following parallel vote

Stromversorgungsgeräte für Niederspannung mit Gleichstromausgang - Eigenschaften

Dispositifs d'alimentation à basse tension à sortie en courant continu - Caractéristiques de fonctionnement

Low-voltage power supply devices, d.c. output – Performance characteristics – Amendment 1 (IEC 61204:1993/A1:2001)

General Information

Status
Published
Publication Date
28-Feb-2002
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2002
Due Date
01-Mar-2002
Completion Date
01-Mar-2002

Relations

Effective Date
21-Sep-2010

Overview

EN 61204:1995/A1:2001 (IEC 61204:1993/A1:2001) specifies performance characteristics for low‑voltage power supply devices with d.c. output. The amendment A1 updates scope, test and measurement requirements, environmental testing references and operational modes. It is intended for stabilized power supplies and driver power supplies produced for an unknown final application, and can be applied in addition to product‑specific standards when those do not fully cover performance characteristics.

Key topics and requirements

  • Scope and use: Applies to a.c. or d.c. driver power supplies with any number of outputs, especially when final application is unknown. Where a product standard exists, that standard takes precedence; EN 61204 may be used as a complementary option.
  • Source voltage and frequency:
    • Manufacturers/users must state if automatic voltage selection is required.
    • Additional frequency classes defined (examples): 45–55 Hz, 55–65 Hz, 49–51 Hz, 59–61 Hz.
  • Output characteristics and measurement:
    • Periodic and random deviation now explicitly includes spikes; the bandwidth of measuring equipment must be stated when reporting results.
  • Output protection modes:
    • Adds Inhibit and retry mode to the list of acceptable overcurrent protection behaviours.
  • Protective devices and acoustic noise:
    • Clause restructuring clarifies requirements for protective devices; interference clause replaced by acoustic noise requirements.
  • Environmental and mechanical tests:
    • Requires manufacturers to specify which IEC 60068 test(s) (e.g., Ad, Ea, Fc) and severity levels will be applied.
    • In‑operation tests: cold, dry heat, damp heat per IEC 60068-2-1/2/3.
    • Not in operation tests: shock, bump, vibration per IEC 60068-2-27, -29, -6.
  • Documentation note:
    • Example drawing notes (e.g., adapter/connector type) are not mandatory unless specified by the manufacturer.

Applications and who uses it

  • Manufacturer product specifications for stabilized DC power supplies and driver supplies.
  • Design engineers and OEMs integrating power modules into larger equipment, where predictable performance and environmental robustness are required.
  • Test laboratories and compliance teams implementing measurement procedures and environmental tests based on IEC 60068 references.
  • Procurement and quality assurance teams demanding standardized performance data from suppliers.

Related standards

  • IEC 61204 (base standard)
  • IEC 60068 series (environmental testing)
  • Relevant product‑specific standards (take precedence when applicable)

Keywords: EN 61204, IEC 61204, low‑voltage power supply, d.c. output, performance characteristics, stabilized power supply, output overcurrent protection, environmental testing, IEC 60068, automatic voltage selection, periodic deviation, spikes.

Amendment

SIST EN 61204:1999/A1:2002

English language
7 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

SIST EN 61204:1999/A1:2002 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Low-voltage power supply devices, d.c. output - Performance characteristics". This standard covers: EN following parallel vote

EN following parallel vote

SIST EN 61204:1999/A1:2002 is classified under the following ICS (International Classification for Standards) categories: 29.200 - Rectifiers. Convertors. Stabilized power supply. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 61204:1999/A1:2002 has the following relationships with other standards: It is inter standard links to SIST EN 61204:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 61204:1999/A1:2002 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN 61204:1999/A1:2002 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2002
Low-voltage power supply devices, d.c. output – Performance characteristics –
Amendment 1 (IEC 61204:1993/A1:2001)
Low-voltage power supply devices, d.c. output - Performance characteristics
Stromversorgungsgeräte für Niederspannung mit Gleichstromausgang - Eigenschaften
Dispositifs d'alimentation à basse tension à sortie en courant continu - Caractéristiques
de fonctionnement
Ta slovenski standard je istoveten z: EN 61204:1995/A1:2001
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61204/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2001
ICS 29.200
English version
Low-voltage power supply devices, d.c. output -
Performance characteristics
(IEC 61204:1993/A1:2001)
Dispositifs d'alimentation à basse tension Stromversorgungsgeräte für Nieder-
à sortie en courant continu - spannung mit Gleichstromausgang -
Caractéristiques de fonctionnement Eigenschaften
(CEI 61204:1993/A1:2001) (IEC 61204:1993/A1:2001)
This amendment A1 modifies the European Standard EN 61204:1995; it was approved by CENELEC on
2001-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61204:1995/A1:2001 E

Foreword
The text of document 22E/77/FDIS, future amendment 1 to IEC 61204:1993, prepared by SC 22E,
Stabilized power supplies, of IEC TC 22, Power electronics, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as amendment A1 to EN 61204:1995 on 2001-03-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-12-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2004-03-01
__________
Endorsement notice
The text of amendment 1:2001 to the International Standard IEC 61204:1993 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
STANDARD
AMENDEMENT 1
AMENDMENT 1
2001-01
Amendement 1
Dispositifs d'alimentation à basse tension,
à sortie en courant continu –
Caractéristiques de fonctionnement
Amendment 1
Low-voltage power supply devices,
d.c. output – Performance characteristics
 IEC 2001 Droits de reproduction réservés  Copyright - all rights reserved
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
E
PRICE CODE
International Electrotechnical Commission
Pour
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...