Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens

This European Standard specifies a procedure to determine the flame spread of textiles for curtains and drapes by testing a vertically oriented specimen in accordance with EN ISO 6941.

Textilien - Brennverhalten von Vorhängen und Gardinen - Detailliertes Verfahren zur Bestimmung der Flammenausbreitungseigenschaften vertikal angeordneter Proben

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Flammenausbreitungseigenschaften von Textilien für Vorhänge und Gardinen durch Prüfung vertikal angeordneter Proben nach EN ISO 6941 fest.

Textiles et produits textiles - Comportement au feu - Rideaux et tentures - Procédure détaillée pour déterminer la propagation de flamme d'éprouvettes disposées verticalement

Tekstilije - Gorljivost - Zavese in zastori - Podroben opis postopka za ugotavljanje razširjanja plamena navpično nameščenih preskušancev

Ta peti del standarda ETS 300 138 določa zgradbo preskuševalnega niza (TSS) in namen preskušanja (TP) za
omrežno stran referenčne točke T ali sovpadajoči referenčni točki S in T (kot je opredeljeno v Priporočilu  ITU-T I.411 [6]) za izvedbe v skladu s standardom tretje stopnje za
nadomestno storitev zaprte skupine uporabnikov (CUG) za vseevropsko digitalno omrežje z integriranimi storitvami
(ISDN) na podlagi protokola digitalne naročniške signalizacije št. 1 (DSS1), ETS 300 138-1 [1]. Naslednji del tega standarda ETS določa abstraktni preskuševalni niz (ATS) in delno proformo za dodatne informacije v okviru preskušanja izvedbe protokola (PIXIT) na podlagi tega standarda ETS. Drugi deli določajo zgradbo preskuševalnega niza in namen preskušanja, abstraktni preskuševalni niz ter delno proformo za dodatne informacije v okviru preskušanja izvedbe protokola za referenčno točko T ali sovpadajoči referenčni točki S in T za izvedbe v skladu s standardom ETS 300 138-1 [1] na strani uporabnika.

General Information

Status
Published
Public Enquiry End Date
04-May-2016
Publication Date
05-Sep-2016
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-Aug-2016
Due Date
05-Nov-2016
Completion Date
06-Sep-2016

Relations

Buy Standard

Standard
SIST EN 1102:2016
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Textilien - Brennverhalten von Vorhängen und Gardinen - Detailliertes Verfahren zur Bestimmung der Flammenausbreitungseigenschaften vertikal angeordneter ProbenTextiles et produits textiles - Comportement au feu - Rideaux et tentures - Procédure détaillée pour déterminer la propagation de flamme d'éprouvettes disposées verticalementTextiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens97.160Tekstilije za dom. PeriloHome textiles. Linen13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN 1102:2016SIST EN 1102:2016en,fr,de01-oktober-2016SIST EN 1102:2016SLOVENSKI

STANDARDSIST EN 1102:19991DGRPHãþD
SIST EN 1102:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1102
August
t r s x ICS
s uä t t rä v râ
{ yä s x r Supersedes EN
s s r tã s { { wEnglish Version

Textiles and textile products æ Burning behaviour æ Curtains and drapes æ Detailed procedure to determine the flame spread of vertically oriented specimens Textiles et produits textiles æ Comportement au feu æ Rideaux et tentures æ Procédure détaillée pour déterminer la propagation de flamme d 5éprouvettes disposées verticalement

Textilien æ Brennverhalten von Vorhängen und Gardinen æ Detailliertes Verfahren zur Bestimmung der Flammenausbreitungseigenschaften vertikal angeordneter Proben This European Standard was approved by CEN on

s t June
t r s xä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels

t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

s s r tã t r s x ESIST EN 1102:2016

EN 1102:2016 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 1 Scope .................................................................................................................................................................... 4 2 Normative references .................................................................................................................................... 4 3 Terms and definitions ................................................................................................................................... 4 4 Sampling ............................................................................................................................................................. 4 5 Cleansing ............................................................................................................................................................ 4 6 Test specimen ................................................................................................................................................... 5 7 Conditioning ...................................................................................................................................................... 5 8 Test procedure ................................................................................................................................................. 5 8.1 Spread of flame ................................................................................................................................................ 5 8.2 Attendant fire phenomena assessment................................................................................................... 5 8.3 Procedure for the evaluation of flaming debris ................................................................................... 5 8.4 Flame spread rate calculation .................................................................................................................... 6 9 Test report ......................................................................................................................................................... 6 SIST EN 1102:2016

EN 1102:2016 (E) 3 European foreword This document (EN 1102:2016) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1102:1995. The ignitability is determined using a modified EN ISO 6941. These modifications are listed in this document. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Form

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.