Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing

This European Standard specifies a method for determining the resistance to shearing of joints between two adjacent sheets of the same plastic or rubber sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung des Zug- Dehnungsverhaltens - Teil 2: Kunststoff- und Kautschukbahnen für Dachabdichtungen

Diese Europäischen Norm legt Prüfverfahren zur Bestimmung der Zugeigenschaften von Kunststoff  und Elastomer¬bahnen zur Dachabdichtung fest.

Feuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

La présente Norme européenne décrit des méthodes d'essai pour la détermination des propriétés en traction
des feuilles d’étanchéité de toiture plastiques et élastomères.

Hidroizolacijski trakovi - Določevanje nateznih lastnosti - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

Ta evropski standard določa metodo za določevanje odpornosti proti rezanju spojev med dvema sosednjima trakovoma enakih polimernih ali elastomernih trakov za tesnjenje streh.

General Information

Status
Withdrawn
Public Enquiry End Date
14-Sep-2009
Publication Date
14-Sep-2010
Withdrawal Date
01-Aug-2013
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Aug-2013
Due Date
25-Aug-2013
Completion Date
02-Aug-2013

RELATIONS

Buy Standard

Standard
SIST EN 12311-2:2010
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
kSIST FprEN 12311-2:2009
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung des Zug- Dehnungsverhaltens - Teil 2: Kunststoff- und Kautschukbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 12311-2:2010SIST EN 12311-2:2010en,fr,de01-oktober-2010SIST EN 12311-2:2010SLOVENSKI

STANDARDSIST EN 12311-2:20011DGRPHãþD
SIST EN 12311-2:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12311-2
July 2010 ICS 91.100.50 Supersedes EN 12311-2:2000English Version

Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing

Feuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

Abdichtungsbahnen - Bestimmung des Zug-Dehnungsverhaltens - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen This European Standard was approved by CEN on 29 May 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12311-2:2010: ESIST EN 12311-2:2010

EN 12311-2:2010 (E) 2 Contents Page Foreword ..............................................................................................................................................................3Introduction .........................................................................................................................................................41 Scope ......................................................................................................................................................52 Normative references ............................................................................................................................53 Terms and definitions ...........................................................................................................................54 Principle ..................................................................................................................................................55 Apparatus ...............................................................................................................................................66 Sampling .................................................................................................................................................67 Preparation of test specimens .............................................................................................................68 Procedure ...............................................................................................................................................69 Expression of results ............................................................................................................................89.1 Evaluation ...............................................................................................................................................89.2 Precision of the test method ................................................................................................................910 Test report ..............................................................................................................................................9Bibliography ..................................................................................................................................................... 10 SIST EN 12311-2:2010

EN 12311-2:2010 (E) 3 Foreword This document (EN 12311-2:2010) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12311-2:2000. This European Standard “Flexible sheets for waterproofing - Determination of tensile properties” consists of two parts: - Part 1: Bitumen sheets for roof waterproofing; - Part 2: Plastic and rubber sheets for roof waterproofing. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 12311-2:2010

EN 12311-2:2010 (E) 4 Introduction This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or supplied before use. This test method relates exclusively to products, or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. This test is intended to be used in conjunction with EN 13956, Flexible sheet for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics. This document contains two methods of test. Method A, based on EN ISO 1421, is the preferred method which should be used for all materials. If method A is not suited to the material, i.e. the material does not rupture; method B based on ISO 37 can then be used to determine tensile properties.

SIST EN 12311-2:2010

EN 12311-2:2010 (E) 5 1 Scope This European Standard specifies test methods for the determination of the tensile properties of plastic and rubber sheets for roof waterproofing. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1548, Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Method for exposure to bitumen EN 1847, Flexible sheets for waterproofing — Plastics and rubber sheets for roof waterproofing — Methods for exposure to liquid chemicals, including water EN 1849-2, Flexible shee

...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung des Zug- Dehnungsverhaltens - Teil 2: Kunststoff- und Kautschukbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination des propriétés en traction - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:FprEN 12311-2kSIST FprEN 12311-2:2009en,fr,de01-september-2009kSIST FprEN 12311-2:2009SLOVENSKI

STANDARD
kSIST FprEN 12311-2:2009

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTFprEN 12311-2June 2009ICS 91.100.50Will supersede EN 12311-2:2000

English VersionFlexible sheets for waterproofing - Determination of tensileproperties - Part 2: Plastic and rubber sheets for roofwaterproofingFeuilles souples d'étanchéité - Détermination despropriétés en traction - Partie 2: Feuilles d'étanchéité detoiture plastiques et élastomèresAbdichtungsbahnen - Bestimmung des Zug-Dehnungsverhaltens - Teil 2: Kunststoff- undKautschukbahnen für DachabdichtungenThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 254.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:

Avenue Marnix 17,

B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. FprEN 12311-2:2009: EkSIST FprEN 12311-2:2009

FprEN 12311-2:2009 (E) 2 Contents Page Foreword ............................................................................................................................................................. 3Introduction ........................................................................................................................................................ 41 Scope...................................................................................................................................................... 52 Normative references ........................................................................................................................... 53 Terms and definitions ........................................................................................................................... 54 Principle ................................................................................................................................................. 55 Apparatus .............................................................................................................................................. 66 Sampling ................................................................................................................................................ 67 Preparation of test specimens ............................................................................................................. 68 Procedure .............................................................................................................................................. 69 Expression of results............................................................................................................................ 99.1 Evaluation .............................................................................................................................................. 99.2 Precision of the test method ................................................................................................................ 910 Test report ........................................................................................................................................... 10Bibliography ..................................................................................................................................................... 11 kSIST FprEN 12311-2:2009

FprEN 12311-2:2009 (E) 3 Foreword This document (FprEN 12311-2:2009) has been prepared by Technical Committee CEN/TC 254 “Flexible sheets for waterproofing”, the secretariat of which is held by BSI. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12311-2:2000.

kSIST FprEN 12311-2:2009

FprEN 12311-2:2009 (E) 4 Introduction This European Standard is intended for characterisation of plastic and rubber sheets as manufactured or supplied before use. This test method relates exclusively to products, or to their components where appropriate, and not to waterproofing membrane systems composed of such products and installed in the works. This test is intended to be used in conjunction with EN 13956, Flexible sheet for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics. The document contains two methods of test. Method A, based on EN ISO 1421, is the preferred method which should be used for all materials. If method A is not suited to the material, i.e. the material does not rupture; method B based on ISO 37 can then be used to determine tensile properties.

kSIST FprEN 12311-2:2009
FprEN 12311-2:2009 (E) 5

1 Scope This European Standard specifies test methods for the determination of the tensile properties of plastic and rubber sheets for roof waterproofing: 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1849-2, Flexible sheets for waterproofing — Determination of thickness and mass per unit area — Part 2: Plastic and rubber sheets for roof waterproofing EN 13416, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Rules for sampling EN ISO 7500-1, M

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.