SIST EN 15860:2010
(Main)Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
This European Standard specifies the requirements and associated test methods that apply to semifinished products such as rods, hollow bars and plates made from thermoplastic materials. These semifinished products are used predominantly for the manufacture of finished parts by means of machining.
Kunststoffe - Thermoplastische Halbzeuge für die spanende Verarbeitung - Anforderungen und Prüfmethoden
Diese Europäische Norm legt Anforderungen sowie Prüfverfahren für Halbzeuge wie Rund-, Hohl- und
Flachstäbe aus thermoplastischen Kunststoffen fest. Diese Halbzeuge werden vorzugsweise für die spanende
Herstellung von Fertigteilen verwendet.
Plastiques - Produits semi-finis en matières thermoplastiques à usiner - Prescriptions et méthodes d'essai
La présente Norme européenne spécifie les exigences et méthodes d'essai associées qui s’appliquent à des produits semi-finis tels que des barres rondes, barres tubulaires et plaques en matières thermoplastiques. Ces produits semi-finis sont principalement utilisés pour la fabrication par usinage de pièces finies.
Polimerni materiali - Plastomerni polizdelki za nadaljnjo obdelavo - Zahteve in preskusne metode
Ta evropski standard določa zahteve in povezane preskusne metode, ki veljajo za polizdelke, kot so palice, votle palice in plošče, narejene iz plastomernih materialov. Ti polizdelki se večinoma uporabljajo za izdelavo končnih izdelkov s strojno obdelavo.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polimerni materiali - Plastomerni polizdelki za nadaljnjo obdelavo - Zahteve in preskusne metodeKunststoffe - Thermoplastische Halbzeuge für die spanende Verarbeitung - Anforderungen und PrüfmethodenPlastiques - Produits semi-finis en matières thermoplastiques à usiner - Prescriptions et méthodes d'essaiPlastics - Thermoplastic semi-finished products for machining - Requirements and test methods83.080.20PlastomeriThermoplastic materialsICS:Ta slovenski standard je istoveten z:EN 15860:2010SIST EN 15860:2010en,fr,de01-september-2010SIST EN 15860:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15860
June 2010 ICS 83.080.20 English Version
Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
Plastiques - Produits semi-finis thermoplastiques pour usinage - Exigences et méthodes d'essai
Kunststoffe - Thermoplastische Halbzeuge für die spanende Verarbeitung - Anforderungen und PrüfmethodenThis European Standard was approved by CEN on 19 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15860:2010: ESIST EN 15860:2010
Procedure for the determination of microporosity in semi-finished products.37 Annex B (normative)
Tables for the conversion of deflection values (straightness).41 Annex C (informative)
Examples of calculation of dimensional stability after heat treatment.44 C.1 Rods.44 C.2 Hollow bars.44 C.3 Panels/plates.45 Bibliography.46
(ISO 527-1:1993 including Corr. 1:1994) EN ISO 527-2:1996, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr.1:1994) EN ISO 1043-1:2001, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001) EN ISO 1133, Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1: 2004) EN ISO 1183-2, Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method (ISO 1183-2:2004) EN ISO 2818, Plastics — Preparation of test specimens by machining (ISO 2818:1994) EN ISO 10350-1, Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials (ISO 10350-1:2007) EN ISO 11357-1, Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles (ISO 11357-1:2009) ISO 1628-5, Plastics — Determination of the viscosity of polymers in dilute solution using ca
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.