SIST EN 14161:2011+A1:2015
(Main)Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
This European Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
It applies to pipeline systems on land (see exclusion below) and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline constructed within the boundaries of such facilities for the purpose of its connection. The extent of pipeline systems covered by this European Standard is illustrated in Figure 1.
This European Standard applies to rigid, metallic pipelines. It is not applicable for flexible pipelines or those constructed from other materials, such as glass-reinforced plastics.
This European Standard is applicable to all new pipeline systems and can be applied to modifications made to existing ones. It is not intended that it apply retroactively to existing pipeline systems.
It describes the functional requirements of pipeline systems and provides a basis for their safe design, construction, testing, operation, maintenance and abandonment.
On-land supply systems used by the European gas supply industry from the input of gas into the on-land transmission network up to the inlet connection of gas appliances are excluded from the scope of this European Standard.
Erdöl- und Erdgasindustrie - Rohrleitungstransportsysteme (ISO 13623:2009 modifiziert)
!Diese Europäische Norm legt Anforderungen fest und enthält Empfehlungen hinsichtlich Konstruktion, Werkstoffen, Bauausführung, Prüfung, Betrieb, Instandhaltung und Stilllegung (Aufgabe) von Rohrleitungs-systemen, die in der Erdöl- und Erdgasindustrie für Transportzwecke verwendet werden.
Sie gilt für Rohrleitungssysteme an Land (siehe nachstehende Ausnahme) und Offshore, bei Anschlussbohrungen, in Produktionsanlagen, Prozessanlagen, Raffinerien und für Speichereinheiten, einschließlich aller Rohrleitungsabschnitte, die innerhalb solcher Einrichtungen zu deren Verbindung verwendet werden. Der Umfang der in dieser Europäischen Norm behandelten Rohrleitungssysteme ist in Bild 1 dargestellt.
Diese Europäische Norm gilt für starre Rohrleitungen aus Metall. Sie gilt nicht für flexible Rohrleitungen oder Rohr¬leitungen aus anderen Werkstoffen, z. B. glasfaserverstärkte Kunststoffe.
Diese Europäische Norm gilt für alle neuen Rohrleitungssysteme und kann für die an den vorhandenen Rohrleitungssystemen durchgeführten Änderungen angewendet werden. Eine rückwirkende Anwendung auf vorhandene Rohrleitungssysteme ist nicht beabsichtigt.
Sie beschreibt die funktionellen Anforderungen an Rohrleitungssysteme und dient als Grundlage für deren sichere Konstruktion, Bauausführung, Prüfung, Betrieb, Instandhaltung und Stilllegung (Aufgabe).
Versorgungssysteme an Land, die von der Europäischen Gasversorgungsindustrie benutzt werden, sind vom Anwendungsbereich dieser Norm ausgeschlossen, ausgenommen von der Einspeisung des Erdgases in die Rohrleitungstransportsysteme an Land bis zum Eingangsanschluss gasbetriebener Endgeräte."
Industries du pétrole et du gaz naturel - Systèmes de transport par conduites (ISO 13623:2009 modifiée)
!La présente Norme européenne spécifie des exigences et fournit des recommandations relatives à la conception, au choix des matériaux, à la construction, aux essais, à l'exploitation, à la maintenance et à l'abandon des systèmes de conduites utilisés pour le transport dans les industries du pétrole et du gaz naturel.
Elle s'applique aux systèmes de conduites à terre (à l'exclusion des éléments ci-dessous) et en mer, assurant les liaisons entre puits producteurs, unités de production, installations de traitement, raffineries et installations de stockage, y compris tout tronçon de conduite construit dans les limites de ces installations en vue de leur raccordement aux autres installations. L'étendue des systèmes de conduites couverts par la présente Norme européenne est illustrée à la Figure 1.
La présente Norme européenne s'applique uniquement aux conduites métalliques rigides. Elle n'est pas applicable aux conduites flexibles ni aux conduites constituées d'autres matériaux tels que les plastiques renforcés de fibres de verre.
La présente Norme européenne est applicable à tous les nouveaux systèmes de conduites et peut être appliquée aux modifications apportées aux systèmes existants. Elle n'est pas destinée à s'appliquer rétroactivement aux systèmes de conduites existants.
Elle définit les exigences fonctionnelles applicables aux systèmes de conduites et fournit une base pour effectuer de façon sûre la conception, la construction, les essais, l'exploitation, la maintenance et l'abandon de ces systèmes.
Les systèmes d'alimentation terrestres utilisés dans l'industrie d'alimentation en gaz européenne, à partir de l'entrée du gaz dans le réseau de transmission terrestre jusqu'au raccord d'entrée des appareils à gaz, sont exclus du domaine d'application de la présente Norme européenne."
Industrija nafte in zemeljskega plina - Transportni cevovodni sistemi (ISO 13623:2009, spremenjen)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrija nafte in zemeljskega plina - Transportni cevovodni sistemi (ISO 13623:2009, spremenjen)Erdöl- und Erdgasindustrie - Rohrleitungstransportsysteme (ISO 13623:2009 modifiziert)Industries du pétrole et du gaz naturel - Systèmes de transport par conduites (ISO 13623:2009 modifiée)Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 14161:2011+A1:2015SIST EN 14161:2011+A1:2015en,fr,de01-julij-2015SIST EN 14161:2011+A1:2015SLOVENSKI
STANDARDSIST EN 14161:20111DGRPHãþD
SIST EN 14161:2011+A1:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14161:2011+A1
April 2015 ICS 75.200 Supersedes EN 14161:2011English Version
Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
Industries du pétrole et du gaz naturel - Systèmes de transport par conduites (ISO 13623:2009 modifiée)
Erdöl- und Erdgasindustrie - Rohrleitungstransportsysteme (ISO 13623:2009 modifiziert) This European Standard was approved by CEN on 3 June 2011 and includes Amendment 1 approved by CEN on 5 March 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14161:2011+A1:2015 ESIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 2 Contents Page Foreword .5 Introduction .6 1 Scope .7 2 Normative references .9 3 Terms, definitions and symbols . 11 3.1 Terms and definitions . 11 3.2 Symbols . 13 4 General . 14 4.1 Health, safety and the environment . 14 4.2 Competence assurance . 14 4.3 Compliance . 14 4.4 Records . 14 5 Pipeline system design . 14 5.1 System definition . 14 5.2 Categorization of fluids . 14 5.3 Hydraulic analysis . 15 5.4 Pressure control and overpressure protection . 15 5.5 Requirements for operation and maintenance . 15 5.6 Public safety and protection of the environment . 16 6 Design of pipeline and primary piping . 16 6.1 Design principles . 16 6.2 Route selection . 17 6.3 Loads . 19 6.4 Strength requirements . 22 6.5 Stability . 26 6.6 Pipeline spanning . 27 6.7 Pressure test requirements . 27 6.8 Other activities . 28 6.9 Crossings and encroachments . 29 6.10 Adverse ground and seabed conditions . 31 6.11 Section isolation valves . 31 6.12 Integrity monitoring . 31 6.13 Design for pigging . 31 6.14 Fabricated components . 32 6.15 Attachment of supports or anchors. 33 6.16 Offshore risers . 34 7 Design of stations and terminals . 35 7.1 Selection of location . 35 7.2 Layout . 35 7.3 Security . 36 7.4 Safety . 36 7.5 Environment . 36 7.6 Buildings . 36 7.7 Equipment . 36 7.8 Piping . 37 7.9 Emergency shutdown system . 38 7.10 Electrical . 38 7.11 Storage and working tankage . 38 SIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 3 7.12 Heating and cooling stations . 38 7.13 Metering and pressure control stations . 38 7.14 Monitoring and communication systems . 39 7.15 Compressor stations for on-land gas supply systems . 39 8 Materials and coatings . 39 8.1 General material requirements for pipelines and primary piping . 39 8.2 Line pipe . 42 8.3 Components other than pipe. 43 8.4 Coatings . 44 9 Corrosion management . 45 9.1 General . 45 9.2 Internal corrosivity evaluation . 46 9.3 Internal corrosion mitigation . 46 9.4 External corrosion evaluation . 48 9.5 External corrosion mitigation . 49 9.6 Monitoring programmes and methods . 50 9.7 Evaluation of monitoring and inspection results . 51 9.8 Corrosion-management documentation . 51 10 Construction . 52 10.1 General . 52 10.2 Preparation of the route on land . 53 10.3 Preparation of the route offshore . 53 10.4 Welding and joining . 53 10.5 Coating . 54 10.6 Installation of pipelines on land . 55 10.7 Installation of offshore pipelines . 57 10.8 Cleaning and gauging . 59 10.9 As-built surveys . 60 10.10 Construction records . 60 11 Testing . 60 11.1 General . 60 11.2 Safety . 61 11.3 Procedures . 61 11.4 Acceptance criteria . 62 11.5 Tie-ins following testing . 62 11.6 Testing equipment . 63 11.7 Test documentation and records . 63 11.8 Disposal of test fluids . 64 11.9 Protection following test . 64 12 Pre-commissioning and commissioning . 64 12.1 General . 64 12.2 Cleaning and gauging procedures . 64 12.3 Drying procedures . 64 12.4 Functional testing of equipment and systems . 65 12.5 Documentation and records . 65 12.6 Start-up procedures and introduction of transported fluid . 65 13 Operation, maintenance and abandonment . 66 13.1 Management . 66 13.2 Operations . 69 13.3 Maintenance . 70 13.4 Changes to the design condition . 77 13.5 Life extension . 78 13.6 Abandonment . 78 Annex A (normative)
Safety evaluation of pipelines . 79 A.1 Introduction . 79 A.2 General requirements . 79 SIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 4 A.3 Definition of the scope of the evaluation . 79 A.4 Hazard identification and initial evaluation . 80 A.5 Hazard estimation . 81 A.6 Review of results . 82 A.7 Documentation . 82 Annex B (normative)
Supplementary requirements for public safety of pipelines for category D and E fluids on land . 83 B.1 Objective . 83 B.2 Location classification . 83 B.3 Population density . 84 B.4 Concentration of people . 84 B.5 Maximum hoop stress . 84 B.6 Pressure test requirements . 85 Annex C (informative)
Pipeline route selection process . 86 C.1 Limits . 86 C.2 Constraints . 86 C.3 Preferred corridors of interest . 86 C.4 Detailed routing . 86 Annex D (informative)
Examples of factors for routing considerations . 87 Annex E (informative)
Scope of procedures for operation, maintenance and emergencies . 89 E.1 Operating procedures . 89 E.2 Maintenance procedures . 89 E.3 Emergency procedures . 90 Annex F (informative)
Records and documentation . 91 Bibliography . 92
SIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 5 Foreword This document (EN 14161:2011+A1:2015) has been prepared by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 14161:2011". This document includes Amendment 1 approved by CEN on 2015-03-01. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". The text of ISO 13623:2009 has been adopted by CEN/TC 12 with some modifications. These modifications are indicated by a vertical line in the left margin of the text.
Where the expression “International Standard” is used, it is understood as “European Standard”. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 6 Introduction Significant differences exist between member countries in the areas of public safety and protection of the environment, which cannot be reconciled into a single preferred approach to pipeline transportation systems for the petroleum and natural gas industries. Reconciliation was further complicated by the existence in some member countries of legislation that establishes requirements for public safety and protection of the environment. Recognizing these differences, ISO/TC 67/SC 2 concluded that this International Standard should allow individual countries to apply their national requirements for public safety and the protection of the environment. This International Standard is not a design manual; rather, it is intended for use in conjunction with sound engineering practice and judgment. This International Standard allows the use of innovative techniques and procedures, such as reliability-based limit state design methods, providing the minimum requirements of this International Standard are satisfied. This second edition cancels and replaces the first edition, (ISO 13623:2000), which has been technically revised. Major revisions include replacement of various references to national standards with references to International Standards; replacement of sections on coatings and cathodic protection with ISO references; revision of design to accommodate line pipe above L555 in the new edition of ISO 3183; and the addition of a section on life extension. ISO 13623:2009, developed within ISO/TC 67 SC 2, has been adopted as EN 14161:2011 (ISO 13623:2009 modified). The scope of ISO/TC 67/SC 2 is pipeline transportation systems for the petroleum and natural gas industries without exclusions. However, in CEN the scopes of CEN/TC 12 and CEN/TC 234 overlapped until 1995. This scope overlap caused problems for the parallel procedure for the above-mentioned items. The conflict in scope was resolved when both the CEN/Technical Committees and the CEN/BT took the following resolution: Resolution BT 38/1995: Subject: Revised scope of CEN/TC 12 “BT endorses the conclusions of the coordination meeting between CEN/TC 12 “Materials, equipment and offshore structures for petroleum and natural gas industries” and CEN/TC 234 “Gas supply” and modifies the CEN/TC 12 scope, to read: “Standardization of the materials, equipment and offshore structures used in drilling, production, refining and the transport by pipelines of petroleum and natural gas, excluding on-land supply systems used by the gas supply industry and those aspects of offshore structures covered by IMO requirement (ISO/TC 8). The standardization is to be achieved wherever possible by the adoption of ISO Standards.” In 2009, CEN/TC 12 changed its scope to be in coherency with the last CEN/TC 234's scope changes, as follows (resolution CEN/BTC 19/2009):
Standardisation of the materials, equipment and offshore structures used in the drilling, production, transport by pipelines and processing of liquid and gaseous hydrocarbons within the petroleum, petrochemical and natural gas industries, excluding on-land supply systems used by the gas supply industry excluding gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances. (covered by CEN/TC234) and those aspects of offshore structures covered by IMO requirements (ISO/TC8). The standardisation is to be achieved wherever possible by the adoption of ISO standards. !Resulting from these resolutions, "on-land supply systems used by the European gas supply industry from the input of gas into the on-land transmission network up to the inlet connection of gas appliances" are excluded from the scope of ISO 13623:2009 for the European adoption by CEN/TC 12."
SIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 7 1 Scope !This European Standard specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
It applies to pipeline systems on land (see exclusion below) and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline constructed within the boundaries of such facilities for the purpose of its connection. The extent of pipeline systems covered by this European Standard is illustrated in Figure 1.
This European Standard applies to rigid, metallic pipelines. It is not applicable for flexible pipelines or those constructed from other materials, such as glass-reinforced plastics.
This European Standard is applicable to all new pipeline systems and can be applied to modifications made to existing ones. It is not intended that it apply retroactively to existing pipeline systems.
It describes the functional requirements of pipeline systems and provides a basis for their safe design, construction, testing, operation, maintenance and abandonment. On-land supply systems used by the European gas supply industry from the input of gas into the on-land transmission network up to the inlet connection of gas appliances are excluded from the scope of this European Standard." SIST EN 14161:2011+A1:2015
EN 14161:2011+A1:2015 (E) 8
Key 1 wellsite 5 pump station 9 depot 2 gathering station, treatment plant or process plant 6 valve station 10 distribution 3 liquid 7 tankage 11 compressor station 4 gas 8 refinery 12 pressure-reduction station
Pipeline elements covered by this International Standard
Connections with other facilities. The pipeline system should include an isolation valve at connections with
other facilities and at branches.
Pipeline elements not covered by this International Standard.
Station/plant area, offshore installation not covered by this International Standard.
Station/plant area covered by this International Standard.
NOTE The pipeline system should include an isolation valve at connections with other facilities and at branches. Figure 1 — Extent of pipeline systems covered by this Int
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.