oSIST prEN ISO/IEC 17030:2021
(Main)Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC DIS 17030:2021)
Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC DIS 17030:2021)
Konformitätsbewertung - Allgemeine Anforderungen an Konformitätszeichen einer dritten Seite (ISO/IEC DIS 17030:2021)
Dieses Dokument legt allgemeine Anforderungen an Konformitätszeichen einer dritten Seite fest, einschließlich deren Ausstellung und Verwendung.
Dieses Dokument deckt die Konformitätszeichen einer dritten Seite ab, die in unterschiedlichen Formen und verschiedenen Medien, einschließlich digitaler Darstellung mittels elektronisch gespeicherten und dargestellten Kennzeichnungen, maschinenlesbarem Code, Blockchain (verteilte elektronische Journale) oder anderen elektronischen Mitteln ausgestellt und verwendet werden.
ANMERKUNG 1 Dieses Dokument kann auch als Leitlinie für die Verwendung von Konformitätszeichen in anderen Konformitätsbewertungstätigkeiten als der durch eine dritte Seite verwendet werden.
ANMERKUNG 2 Konformitätszeichen einer dritten Seite entsprechend diesem Dokument beinhalten Erkennungszeichen, wie Akkreditierungssymbole. Für eine einheitliche Terminologie in diesem Dokument werden sie als Akkreditierungssymbole bezeichnet.
ANMERKUNG 3 Konformitätszeichen einer dritten Seite entsprechend dieses Dokuments können Logos (z. B. das Zeichen einer Konformitätsbewertungsstelle oder Markenzeichen), Symbole (z. B. die Darstellung der Wiedererkennung in einer Akkreditierungsvereinbarung oder der Abbildung eines anzuwendenden Programms) oder eine Kombination davon enthalten.
ANMERKUNG 4 Konformitätszeichen einer dritten Seite als graphische Darstellung der demonstrierten Konformität entsprechend diesem Dokument können eine Kombination aus verschiedenen Zeichen (z. B. Angabe der Übereinstimmung mit mehreren Spezifikationssätzen, Codes für individuell erfüllte Spezifikationen) sein.
ANMERKUNG 5 Dieses Dokument gilt nicht für Zeichen, die nur einen Hinweis auf eine Bezeichnung, einen Code oder eine Klassifizierung bieten. Darüber hinaus gilt es nicht für graphische Darstellungen (z. B. Konformitätsbewertungsprogramme) und Logos (z. B. Gesellschaften von Akkreditierungsstellen und Gesellschaften von Konformitätsbewertungsstellen).
ANMERKUNG 6 Konformitätszeichen einer dritten Seite basieren auf einem Konformitätsbewertungsprogramm, das die Überwachungsfunktion beinhaltet.
Évaluation de la conformité - Exigences générales pour les marques de conformité par tierce partie (ISO/IEC DIS 17030:2021)
Ugotavljanje skladnosti - Splošne zahteve za znake skladnosti tretje stranke (ISO/IEC DIS 17030:2021)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO/IEC 17030:2021
01-april-2021
Ugotavljanje skladnosti - Splošne zahteve za znake skladnosti tretje stranke
(ISO/IEC DIS 17030:2021)
Conformity assessment - General requirements for third-party marks of conformity
(ISO/IEC DIS 17030:2021)
Konformitätsbewertung - Allgemeine Anforderungen an Konformitätszeichen einer dritten
Seite (ISO/IEC DIS 17030:2021)Évaluation de la conformité - Exigences générales pour les marques de conformité par
tierce partie (ISO/IEC DIS 17030:2021)Ta slovenski standard je istoveten z: prEN ISO/IEC 17030
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
oSIST prEN ISO/IEC 17030:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO/IEC 17030:2021
---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEC 17030:2021
DRAFT INTERNATIONAL STANDARD
ISO/IEC DIS 17030
ISO/CASCO Secretariat: ISO
Voting begins on: Voting terminates on:
2021-01-28 2021-04-22
Conformity assessment — General requirements for third-
party marks of conformity
Évaluation de la conformité — Exigences générales pour les marques de conformité par tierce partie
ICS: 03.120.20This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
This draft is submitted to a parallel vote in ISO and in IEC.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/IEC DIS 17030:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO/IEC 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEC 17030:2021
ISO/IEC DIS 17030:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEC 17030:2021
ISO/IEC DIS 17030:2021(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
Introduction ..................................................................................................................................................................................................................................v
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 General requirements ..................................................................................................................................................................................... 2
5 Third-party marks of conformity and their use .................................................................................................................. 2
6 Issuing third-party marks of conformity .................................................................................................................................... 3
7 Ownership and control .................................................................................................................................................................................. 4
7.1 Information ................................................................................................................................................................................................ 4
7.2 Licence ........................................................................................................................................................................................................... 4
7.3 Monit oring the use of third-party marks of conformity ...................................................................................... 4
Annex A (informative) Use of third-party marks of conformity ............................................................................................... 5
Bibliography ................................................................................................................................................................................................................................ 7
© ISO/IEC 2021 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO/IEC 17030:2021
ISO/IEC DIS 17030:2021(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of conformity assessment, the ISO Committee on conformity assessment (CASCO) is
responsible for the development of International Standards and Guides.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
Draft International Standards are circulated to the national bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 17030 was prepared by the ISO Committee on conformity assessment (CASCO).
This second edition cancels and replaces the first edition (ISO/IEC 17030:2003), which has been
technically revised.The main changes compared to the previous edition are as follows:
— Annex A (informative) has been included as guidance for the use of third-party marks of conformity
issued based on a defined object of conformity through conformity assessment standards;
— clarification of the requirement of surveillance;— clarification of logo/symbol/mark;
— restructuring;
— alignment of language with the CASCO toolbox.
ISO/IEC Guide 23:1982 and ISO Guide 27:1983 have been taken into account during the revision of this
standard and these guides have been withdrawn following the publication of this standard.
The content related to examples of possible misuse of third-party marks of conformity have been
considered in a brochure available on iso.org.It was circulated for voting to the national bodies of both ISO and IEC, and was approved by both
organizations.iv © ISO/IEC 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO/IEC 17030:2021
ISO/IEC DIS 17030:2021(E)
Introduction
The prime purpose of this document is to enable a uniform approach to the use of third-party marks of
conformity, to fill relevant gaps in existing ISO, IEC, ISO/IEC Standards and Guides, to address potential
problems arising from different uses of third-party marks of conformity, to provide a clear and rational
basis for their use, and to set out general requirements. This document concentrates on third-party
marks of conformity but may also be used as guidance for other applications of marks of conformity.
Marks of conformity have different uses and can take different forms in various media such as
employing QR codes, public ledger technology (e.g. blockchain) or other electronic means. They are
found on products, certificates and publications denoting the conformity to specified requirements of
a product, management system, service, process, person or an organization. Marks of conformity used
on product convey to the user that the product fulfils the requirements for characteristics such as its
safety, quality, performance, reliability or impact on the environment. Most important for all marks of
conformity is to gain the confidence of the market, including consumers, in products and other objects
of conformity assessment to which these marks have been applied. The use of this document should
lead to improved market confidence, international recognition and consumer acceptance of third-party
marks of conformity.In order to achieve this, the following questions should be considered and addressed:
— What is the object of conformity assessment?— Which conformity assessment body is providing the third-party mark of conformity?
— Who requires the third-party conformity assessment activity?— Why is this third-party mark of conformity required?
— How is the information of conformity best transmitted to the interested parties, e.g. customers,
users, government authorities?© ISO/IEC 2021 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO/IEC 17030:2021
---------------------- Page: 8 ----------------------
oSIST prEN ISO/IEC 17030:2021
DRAFT INTERNATIONAL STANDARD ISO/IEC DIS 17030:2021(E)
Conformity assessment — General requirements for third-
party marks of conformity
1 Scope
This document provides general requirements for third-party marks of conformity, including their
issue and use.This document covers third-party marks of conformity issued and used in different forms and various
media including digital representation employing electronically stored and displayed marks, machine
readable code, blockchain (distributed ledger) or other electronic means.NOTE 1 This document can also be used as guidance in using marks of conformity in other than third-party
conformity assessment activity.NOTE 2 Third-party marks of conformity according to this document include symbols of recognition such as
accreditation symbols. For consistency of terminology in this document they are referred to as accreditation marks.
NOTE 3 Third-party marks of conformity according to this document can include logos (e.g. the sign of a
conformity assessment body or trademarks), symbols (e.g. the representation of recognition in an accreditation
agreement or the depiction of the applicable programme) or a combination thereof.
NOTE 4 Third-party marks of conformity as a graphic representation of demonstrated conformity according
to this document can be a combination of multiple marks (e.g. indications of compliance with several sets of
specifications, codes for individually fulfilled specifications).NOTE 5 This document does not apply to markings, which provide indication of a designation, a code, or a
classification only. Furthermore, it does not apply to graphic representations (e.g. of conformity assessment
systems or schemes/programmes), logos (e.g. association of accreditation bodies and association of conformity
assessment bodies).NOTE 6 third party mark of conformity are based on a conformity assessment scheme that include the
function of surveillance2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 17000, Conformity assessment — Vocabulary and general principles3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 17000 and the
following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp— IEC Electropedia: available at http:// www .electropedia .org/
© ISO/IEC 2021 – All rights reserved 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.