Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2020)

In addition to the scope of IEC 61326-1, this part of IEC 61326 specifies more detailed test
configurations, operational conditions and performance criteria for equipment with test and
measurement circuits (internal or, external to the equipment, or both) that are not EMC
protected for operational and/or functional reasons, as specified by the manufacturer.
The manufacturer specifies the environment for which the product is intended to be used and
selects the appropriate test level specifications of IEC 61326-1:2020.
NOTE Examples of equipment include, but are not limited to, oscilloscopes, logic analysers, spectrum analysers,
network analysers, analogue instruments, digital multimeters (DMM) and board test systems.

Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahme (IEC 61326-2-1:2020)

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesure pour les applications non protégées de la CEM (IEC 61326-2-1:2020)

IEC 61326-2-1:2020 est disponible sous forme de IEC 61326-2-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L’IEC 61326:2020 donne des spécifications plus détaillées des configurations d’essai, des conditions fonctionnelles et des critères de performance pour les matériels avec des circuits d’essai et de mesure (internes et/ou externes au matériel) qui n’ont pas de protection CEM pour des raisons opérationnelles et/ou fonctionnelles, comme spécifié par le fabricant. Le fabricant spécifie l’environnement auquel le produit est destiné et sélectionne les spécifications pertinentes du niveau d’essai de l’IEC 61326-1:2020.

Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-1. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila učinkovitosti za delovanje občutljive preskusne in merilne opreme za nezaščiteno uporabo EMC (IEC 61326-2-1:2020)

General Information

Status
Published
Public Enquiry End Date
30-Oct-2019
Publication Date
02-Sep-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Jun-2021
Due Date
16-Aug-2021
Completion Date
03-Sep-2021

Relations

Buy Standard

Standard
EN IEC 61326-2-1:2021
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 61326-2-1:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61326-2-1:2021
01-oktober-2021
Nadomešča:
SIST EN 61326-2-1:2013
Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 2-1. del: Posebne zahteve - Preskusne
konfiguracije, obratovalni pogoji in merila učinkovitosti za delovanje občutljive
preskusne in merilne opreme za nezaščiteno uporabo EMC (IEC 61326-2-1:2020)
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-1: Particular requirements - Test configurations, operational conditions and
performance criteria for sensitive test and measurement equipment for EMC unprotected
applications (IEC 61326-2-1:2020)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1:
Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-
Schutzmaßnahme (IEC 61326-2-1:2020)
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions
fonctionnelles et critères de performance pour essai de sensibilité et équipement de
mesure pour les applications non protégées de la CEM (IEC 61326-2-1:2020)
Ta slovenski standard je istoveten z: EN IEC 61326-2-1:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN IEC 61326-2-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61326-2-1:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61326-2-1:2021


EUROPEAN STANDARD EN IEC 61326-2-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2021
ICS 25.040.40; 17.220.20; 33.100.20 Supersedes EN 61326-2-1:2013 and all of its
amendments and corrigenda (if any)
English Version
Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 2-1: Particular requirements -
Test configurations, operational conditions and performance
criteria for sensitive test and measurement equipment for EMC
unprotected applications
(IEC 61326-2-1:2020)
Matériel électrique de mesure, de commande et de Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-
laboratoire - Exigences relatives à la CEM - Partie 2-1: Anforderungen - Teil 2-1: Besondere Anforderungen -
Exigences particulières - Configurations d'essai, conditions Prüfanordnung, Betriebsbedingungen und
fonctionnelles et critères de performance pour essai de Leistungsmerkmale für empfindliche Prüf- und Messgeräte
sensibilité et matériel de mesure pour les applications non für Anwendungen ohne EMV-Schutzmaßnahmen
protégées de la CEM (IEC 61326-2-1:2020)
(IEC 61326-2-1:2020)
This European Standard was approved by CENELEC on 2020-11-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61326-2-1:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61326-2-1:2021
EN IEC 61326-2-1:2021 (E)
European foreword
The text of document 65A/976/FDIS, future edition 3 of IEC 61326-2-1, prepared by SC 65A "System
aspects" of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61326-2-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-12-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-06-04
document have to be withdrawn
This document supersedes EN 61326-2-1:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61326-2-1:2020 was approved by CENELEC as a
European Standard without any modification.

2

---------------------- Page: 4 ----------------------
SIST EN IEC 61326-2-1:2021
EN IEC 61326-2-1:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
The Annex ZA of EN IEC 61326-1:2021 applies with the following additions:
Publication Year Title EN/HD Year
IEC 61326-1 2020 Electrical equipment for measurement, EN IEC 61326-1 2021
control and laboratory use - EMC
requirements - Part 1: General
requirements

3

---------------------- Page: 5 ----------------------
SIST EN IEC 61326-2-1:2021

---------------------- Page: 6 ----------------------
SIST EN IEC 61326-2-1:2021



IEC 61326-2-1

®


Edition 3.0 2020-10




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Electrical equipment for measurement, control and laboratory use –

EMC requirements –

Part 2-1: Particular requirements – Test configurations, operational conditions

and performance criteria for sensitive test and measurement equipment for

EMC unprotected applications




Matériel électrique de mesure, de commande et de laboratoire –

Exigences relatives à la CEM –

Partie 2-1: Exigences particulières – Configurations d'essai, conditions


fonctionnelles et critères de performance pour essai de sensibilité et matériel

de mesure pour les applications non protégées de la CEM








INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 17.220.20; 25.040.40; 33.100.20 ISBN 978-2-8322-8949-5




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 61326-2-1:2021
– 2 – IEC 61326-2-1:2020 © IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General . 5
5 EMC test plan . 6
5.1 General . 6
5.2 Configuration of EUT during testing . 6
5.3 Operation conditions of EUT during testing . 6
5.4 Specification of FUNCTIONAL PERFORMANCE . 7
5.5 Test description . 7
6 Immunity requirements . 7
6.1 Conditions during the tests. 7
6.2 Immunity test requirements . 7
6.3 Random aspects . 7
6.4 Performance criteria . 7
7 Emission requirements . 7
8 Test results and test report . 7
9 Instructions for use . 8
Annex A (normative) Immunity test requirements for PORTABLE TEST AND MEASUREMENT
EQUIPMENT powered by battery or from the circuit being measured . 9
Annex B (informative) Guide for analysis and assessment for electromagnetic
compatibility. 10

---------------------- Page: 8 ----------------------
SIST EN IEC 61326-2-1:2021
IEC 61326-2-1:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRICAL EQUIPMENT FOR MEASUREMENT,
CONTROL AND LABORATORY USE –
EMC REQUIREMENTS –

Part 2-1: Particular requirements –
Test configurations, operational conditions and performance
criteria for sensitive test and measurement equipment
for EMC unprotected applications

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entruste
...

SLOVENSKI STANDARD
oSIST prEN IEC 61326-2-1:2019
01-oktober-2019
Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 2-1. del: Posebne zahteve - Preskusne
konfiguracije, obratovalni pogoji in merila za delovanje občutljive preskuševalne
in merilne opreme v razmerah brez zaščite proti elektromagnetnim motnjam EMC
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-1: Particular requirements - Test configurations, operational conditions and
performance criteria for sensitive test and measurement equipment for EMC unprotected
applications
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1:
Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und
Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-
Schutzmaßnahmen
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions
fonctionnelles et critères de performance pour essai de sensibilité et équipement de
mesure pour les applications non protégées de la CEM
Ta slovenski standard je istoveten z: prEN IEC 61326-2-1:2019
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN IEC 61326-2-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61326-2-1:2019

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61326-2-1:2019
65A/923/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61326-2-1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2019-08-23 2019-11-15
SUPERSEDES DOCUMENTS:
65A/904/CD, 65A/914A/CC

IEC SC 65A : SYSTEM ASPECTS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 77, SC 77A
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

TITLE:
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular
requirements – Test configurations, operational conditions and performance criteria for sensitive test and
measurement equipment for EMC unprotected applications

PROPOSED STABILITY DATE: 2023

NOTE FROM TC/SC OFFICERS:


Copyright © 2019 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61326-2-1:2019
65A/923/CDV – 2 – IEC CDV 61326-2-1 © IEC 2019
1 CONTENTS
2 FOREWORD . 3
3 1 Scope . 5
4 2 Normative references . 5
5 3 Terms and definitions . 5
6 4 General . 5
7 5 EMC test plan . 5
8 5.1 General . 5
9 5.2 Configuration of EUT during testing . 6
10 5.3 Operation conditions of EUT during testing . 6
11 5.4 Specification of functional performance . 7
12 5.5 Test description . 7
13 6 Immunity requirements . 7
14 6.1 Conditions during the tests . 7
15 6.2 Immunity test requirements . 7
16 6.3 Random aspects. 7
17 6.4 Performance criteria . 7
18 7 Emission requirements . 7
19 8 Test results and test report . 7
20 9 Instructions for use . 7
21

---------------------- Page: 4 ----------------------
oSIST prEN IEC 61326-2-1:2019
IEC CDV 61326-2-1 © IEC 2019 – 3 – 65A/923/CDV
22 INTERNATIONAL ELECTROTECHNICAL COMMISSION
23 ____________
24
25 ELECTRICAL EQUIPMENT FOR MEASUREMENT,
26 CONTROL AND LABORATORY USE –
27 EMC REQUIREMENTS –
28
29 Part 2-1: Particular requirements –
30 Test configurations, operational conditions and performance criteria
31 for sensitive test and measurement equipment
32 for EMC unprotected applications
33
34
35 FOREWORD
36 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
37 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
38 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
39 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
40 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
41 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
42 in the subject dealt with may participate in this preparatory work. International, governmental and non-
43 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
44 with the International Organization for Standardization (ISO) in accordance with conditions determined by
45 agreement between the two organizations.
46 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
47 consensus of opinion on the relevant subjects since each technical committee has representation from all
48 interested IEC National Committees.
49 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
50 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
51 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
52 misinterpretation by any end user.
53 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
54 transparently to the maximum extent possible in their national and regional publications. Any divergence
55 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
56 the latter.
57 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
58 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
59 services carried out by independent certification bodies.
60 6) All users should ensure that they have the latest edition of this publication.
61 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
62 members of its technical committees and IEC National Committees for any personal injury, property damage or
63 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
64 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
65 Publications.
66 8) Attention is drawn to the Normative references
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.