Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems (IEC 61326-2-2:2020)

In addition to the scope of IEC 61326-1, this part of IEC 61326 specifies more detailed test
configurations, operational conditions and performance criteria for equipment covered by
Annex A of IEC 61326-1:2020 which is:
– used for testing, measuring or monitoring of protective measures in low-voltage
distribution systems, and;
– powered by battery and/or from the circuit measured, and
– portable.
Examples of such EUTs include, but are not limited to, voltage detectors, insulation testers,
earth continuity testers, earth resistance testers, leakage current clamps, loop impedance
testers, “residual-current-device-testers” (RCD-testers) and phase sequence testers as
defined in IEC 61557 (all parts).
NOTE Particular EMC requirements for equipment covered by IEC 61557-8 and IEC 61557-9 are given in
IEC 61326-2-4.
The manufacturer specifies the environment for which the product is intended to be used
and/or selects the appropriate test level specifications of IEC 61326-1.

Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-2: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den Gebrauch in Niederspannungs-Stromversorgungsnetzen (IEC 61326-2-2:2020)

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance des matériels portatifs d'essai, de mesure et de surveillance utilisés dans des systèmes de distribution basse tension (IEC 61326-2-2:2020)

IEC 61326-2-2:2020 est disponible sous forme de IEC 61326-2-2:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 61326:2020 donne des spécifications plus détaillées des configurations d’essai, des conditions fonctionnelles et des critères de performance pour les matériels couverts par l'Annexe A de l’IEC 61326-1:2020, qui sont: - utilisés pour le contrôle, la mesure ou la surveillance de mesures de protection dans les réseaux de distribution à basse tension, et; - alimentés par batterie et/ou par le circuit mesuré, et - portables. Exemples de tels EST (entre autres): détecteurs de tension, appareils d’essai d’isolement, appareils d’essai de continuité de terre, appareils d’essai de résistance à la terre, pinces de courant de fuite, appareils d’essai d’impédance de boucle, “appareils d’essai de dispositifs à courant résiduel” (appareils d’essai DCR) et appareils d’essai d'ordre de phases, tels que définis dans l’IEC 61557 (toutes les parties).

Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila učinkovitosti za prenosno preskusno merilno opremo in opremo za nadzorovanje, ki se uporablja v nizkonapetostnih distribucijskih sistemih (IEC 61326-2-2:2020)

General Information

Status
Published
Public Enquiry End Date
13-Nov-2019
Publication Date
02-Sep-2021
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Jun-2021
Due Date
16-Aug-2021
Completion Date
03-Sep-2021

RELATIONS

Buy Standard

Standard
SIST EN IEC 61326-2-2:2021 - na SIST naslovnici manjka ICS 33.100.01 - zaradi predolgih naslovov se naslovnica razširi na 2 strani
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
oSIST prEN IEC 61326-2-2:2019
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN IEC 61326-2-2:2021
01-oktober-2021
Nadomešča:
SIST EN 61326-2-2:2013
Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne
konfiguracije, obratovalni pogoji in merila učinkovitosti za prenosno preskusno
merilno opremo in opremo za nadzorovanje, ki se uporablja v nizkonapetostnih
distribucijskih sistemih (IEC 61326-2-2:2020)

Electrical equipment for measurement, control and laboratory use - EMC requirements -

Part 2-2: Particular requirements - Test configurations, operational conditions and

performance criteria for portable test, measuring and monitoring equipment used in low-

voltage distribution systems (IEC 61326-2-2:2020)

Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-2:

Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und

Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den

Gebrauch in Niederspannungs-Stromversorgungsnetzen (IEC 61326-2-2:2020)

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la

CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de

fonctionnement et critères de performance des matériels portatifs d'essai, de mesure et

de surveillance utilisés dans des systèmes de distribution basse tension (IEC 61326-2-

2:2020)
Ta slovenski standard je istoveten z: EN IEC 61326-2-2:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
SIST EN IEC 61326-2-2:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61326-2-2:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 61326-2-2:2021
EUROPEAN STANDARD EN IEC 61326-2-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021

ICS 17.220.20; 33.100.20; 25.040.40 Supersedes EN 61326-2-2:2013 and all of its

amendments and corrigenda (if any)
English Version
Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 2-2: Particular requirements -
Test configurations, operational conditions and performance
criteria for portable testing, measuring and monitoring equipment
used in low-voltage distribution systems
(IEC 61326-2-2:2020)

Matériel électrique de mesure, de commande et de Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-

laboratoire - Exigences relatives à la CEM - Partie 2-2: Anforderungen - Teil 2-2: Besondere Anforderungen -

Exigences particulières - Configurations d'essai, conditions Prüfanordnung, Betriebsbedingungen und

de fonctionnement et critères de performance des matériels Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und

portables d'essai, de mesure et de surveillance utilisés Überwachungsgeräte für den Gebrauch in

dans des réseaux de distribution à basse tension Niederspannungs-Stromversorgungsnetzen

(IEC 61326-2-2:2020) (IEC 61326-2-2:2020)

This European Standard was approved by CENELEC on 2020-11-27. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 61326-2-2:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61326-2-2:2021
EN IEC 61326-2-2:2021 (E)
European foreword

The text of document 65A/977/FDIS, future edition 3 of IEC 61326-2-2, prepared by SC 65A "System

aspects" of IEC/TC 65 "Industrial-process measurement, control and automation" was submitted to the

IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61326-2-2:2021.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2021-12-04

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2024-06-04

document have to be withdrawn

This document supersedes EN 61326-2-2:2013 and all of its amendments and corrigenda (if any).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission

and the European Free Trade Association.
Endorsement notice

The text of the International Standard IEC 61326-2-2:2020 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 61326-2-4:2020 NOTE Harmonized as EN IEC 61326-2-4:2021 (not modified)
IEC 61557-8:2014 NOTE Harmonized as EN 61557-8:2015 (not modified)
IEC 61557-9:2014 NOTE Harmonized as EN 61557-9:2015 (not modified)
---------------------- Page: 4 ----------------------
SIST EN IEC 61326-2-2:2021
EN IEC 61326-2-2:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
The Annex ZA of EN IEC 61326-1:2021 applies with the following additions:
Publication Year Title EN/HD Year
IEC 61326-1 2020 Electrical equipment for measurement, EN IEC 61326-1 2021
control and laboratory use - EMC
requirements - Part 1: General
requirements
IEC 61557 series Electrical safety in low voltage distribution EN 61557 series
systems up to 1 000 V AC and 1 500 V DC
- Equipment for testing, measuring or
monitoring of protective measures - Part 1:
General requirements
---------------------- Page: 5 ----------------------
SIST EN IEC 61326-2-2:2021
---------------------- Page: 6 ----------------------
SIST EN IEC 61326-2-2:2021
IEC 61326-2-2
Edition 3.0 2020-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical equipment for measurement, control and laboratory use –
EMC requirements –
Part 2-2: Particular requirements – Test configurations, operational conditions
and performance criteria for portable testing, measuring and monitoring
equipment used in low-voltage distribution systems
Matériel électrique de mesure, de commande et de laboratoire –
Exigences relatives à la CEM –
Partie 2-2: Exigences particulières – Configurations d’essai, conditions de
fonctionnement et critères de performance des matériels portables d’essai,
de mesure et de surveillance utilisés dans des réseaux de distribution à basse
tension
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.20; 25.040.40; 33.100.20 ISBN 978-2-8322-8951-8

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 61326-2-2:2021
– 2 – IEC 61326-2-2:2020 © IEC 2020
CONTENTS

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 5

4 General ........................................................................................................................... 6

5 EMC test plan .................................................................................................................. 6

5.1 General ................................................................................................................... 6

5.2 Configuration of EUT during testing ........................................................................ 6

5.3 Operation conditions of EUT during testing ............................................................. 7

5.4 Specification of FUNCTIONAL PERFORMANCE .............................................................. 8

5.5 Test description ...................................................................................................... 8

6 Immunity requirements .................................................................................................... 8

6.1 Conditions during the tests...................................................................................... 8

6.2 Immunity test requirements ..................................................................................... 8

6.3 Random aspects ..................................................................................................... 8

6.4 Performance criteria ............................................................................................... 8

7 Emission requirements .................................................................................................... 8

8 Test results and test report .............................................................................................. 9

9 Instructions for use .......................................................................................................... 9

Annex A (normative) Immunity test requirements for PORTABLE TEST AND MEASUREMENT

EQUIPMENT powered by battery or from the circuit being measured ........................................ 10

Annex B (informative) Guide for analysis and assessment for electromagnetic

compatibility.......................................................................................................................... 11

Bibliography .......................................................................................................................... 12

Figure 101 – Test set-up for portable testing, measuring and monitoring equipment

based on IEC 61000-4-3 ......................................................................................................... 6

Figure 102 – Example of connection details for voltage measurements ................................... 7

Figure 103 – Example of connection details for current measurements ................................... 7

---------------------- Page: 8 ----------------------
SIST EN IEC 61326-2-2:2021
IEC 61326-2-2:2020 © IEC 2020 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL EQUIPMENT FOR MEASUREMENT,
CONTROL AND LABORATORY USE –
EMC REQUIREMENTS –
Part 2-2: Particular requirements –
Test configurations, operational conditions and
performance criteria for portable testing, measuring and
monitoring equipment used in low-voltage distribution systems
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Pub
...

SLOVENSKI STANDARD
oSIST prEN IEC 61326-2-2:2019
01-november-2019
Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 2-2. del: Posebne zahteve - Preskusne
konfiguracije, obratovalni pogoji in merila za učinkovitosti za prenosno
preskuševalno, merilno opremo in opremo za nadzorovanje, ki se uporablja v
nizkonapetostnih distribucijski sistemih

Electrical equipment for measurement, control and laboratory use - EMC requirements -

Part 2-2: Particular requirements - Test configurations, operational conditions and

performance criteria for portable test, measuring and monitoring equipment used in low-

voltage distribution systems (IEC 61326-2-2:2012)

Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-2:

Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und

Leistungsmerkmale für ortsveränderliche Prüf-, Mess- und Überwachungsgeräte für den

Gebrauch in Niederspannungs-Stromversorgungsnetzen

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la

CEM - Partie 2-2: Exigences particulières - Configurations d'essai, conditions de

fonctionnement et critères de performance des matériels portatifs d'essai, de mesure et

de surveillance utilisés dans des systèmes de distribution basse tension
Ta slovenski standard je istoveten z: prEN IEC 61326-2-2:2019
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN IEC 61326-2-2:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61326-2-2:2019
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61326-2-2:2019
65A/924/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61326-2-2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2019-08-23 2019-11-15
SUPERSEDES DOCUMENTS:
65A/905/CD, 65A/915A/CC
IEC SC 65A : SYSTEM ASPECTS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 77, SC 77A
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.
TITLE:

Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular

requirements – Test configurations, operational conditions and performance criteria for portable test,

measuring and monitoring equipment used in low-voltage distribution systems
PROPOSED STABILITY DATE: 2023
NOTE FROM TC/SC OFFICERS:

Copyright © 2019 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61326-2-2:2019
65A/924/CDV – 2 – IEC CDV 61326-2-2 © IEC 2019
1 CONTENTS

2 FOREWORD ........................................................................................................................... 3

3 1 Scope ............................................................................................................................... 5

4 2 Normative references ....................................................................................................... 5

5 3 Terms and definitions ....................................................................................................... 5

6 4 General ............................................................................................................................ 6

7 5 EMC test plan ................................................................................................................... 6

8 5.1 General ................................................................................................................... 6

9 5.2 Configuration of EUT during testing ......................................................................... 6

10 5.3 Operation conditions of EUT during testing .............................................................. 8

11 5.4 Specification of functional performance ................................................................... 8

12 5.5 Test description ....................................................................................................... 8

13 6 Immunity requirements ..................................................................................................... 8

14 6.1 Conditions during the tests ...................................................................................... 8

15 6.2 Immunity test requirements ..................................................................................... 8

16 6.3 Random aspects...................................................................................................... 9

17 6.4 Performance criteria ................................................................................................ 9

18 7 Emission requirements ..................................................................................................... 9

19 8 Test results and test report ............................................................................................... 9

20 9 Instructions for use ........................................................................................................... 9

22 Figure 101 – Test set-up for portable test, measuring and monitoring equipment based

23 on IEC 61000-4-3 ................................................................................................................... 7

24 Figure 102 – Example of connection details for voltage measurements ................................... 7

25 Figure 103 – Example of connection details for current measurements ................................... 8

---------------------- Page: 4 ----------------------
oSIST prEN IEC 61326-2-2:2019
IEC CDV 61326-2-2 © IEC 2019 – 3 – 65A/924/CDV
27 INTERNATIONAL ELECTROTECHNICAL COMMISSION
28 ____________
30 ELECTRICAL EQUIPMENT FOR MEASUREMENT,
31 CONTROL AND LABORATORY USE –
32 EMC REQUIREMENTS –
34 Part 2-2: Particular requirements –
35 Test configurations, operational conditions and
36 performance criteria for portable test, measuring and
37 monitoring equipment used in low-voltage distribution systems
40 FOREWORD

41 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

42 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

43 international co-operation on all questions concerning standardization in the electrical and electronic fields. To

44 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

45 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

46 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

47 in the subject dealt with may participate in this preparatory work. International, governmental and non-

48 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

49 with the International Organization for Standardization (ISO) in accordance with conditions determined by

50 agreement between the two organizations.

51 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

52 consensus of opinion on the relevant subjects since each technical committee has representation from all

53 interested IEC National Committees.

54 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

55 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

56 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

57 misinterpretation by any end user.

58 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

59 transparently to the maximum extent possible in their national and regional publications. Any divergence

60 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

61 the latter.

62 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

63 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

64 services carried out by independent certification bodies.

65 6) All users should ensure that they have the latest edition of this publication.

66 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

67 members of its technical committees and IEC National Committees for any personal injury, property damage or

68 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

69 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

70 Publications.

71 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

72 indispensable for the correct applicat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.