SIST EN ISO 28927-8:2010/A1:2016
(Amendment)Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces (ISO 28927-8:2009/Amd 1:2015)
2013-09-20 EMA: Draft for //ENQ received in ISO/CS (see notification of 2013-09-19 in dataservice).
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der Schwingungsemission - Teil 8: Sägen, Feilen und Maschinen für Poliernadeln mit hin- und hergehender Bewegung sowie kleine Sägen mit Schwing- oder Drehbewegung (ISO 28927-8:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de vibrations - Partie 8: Scies, polisseuses et limes alternatives, et petites scies oscillantes ou circulaires - Amendement 1: Polisseuses, forces d'avance modifiées (ISO 28927-8:2009/Amd 1:2015)
Ročna prenosna električna orodja - Preskusne metode za vrednotenje oddajanja vibracij - 8. del: Žage, polirni stroji in pile s povratnim gibanjem ter žage z nihajnim ali krožnim gibanjem - Dopolnilo A1 (ISO 28927-8:2009/Amd 1:2015)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 28927-8:2010/A1:2016
01-marec-2016
5RþQDSUHQRVQDHOHNWULþQDRURGMD3UHVNXVQHPHWRGH]DYUHGQRWHQMHRGGDMDQMD
YLEUDFLMGHO äDJHSROLUQLVWURMLLQSLOHVSRYUDWQLPJLEDQMHPWHUåDJH]QLKDMQLP
DOLNURåQLPJLEDQMHP'RSROQLOR$ ,62 $PG
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part
8: Saws, polishing and filing machines with reciprocating action and small saws with
oscillating or rotating action - Amendment 1: Polishing machines, modified feed forces
(ISO 28927-8:2009/Amd 1:2015)
Handgehaltene motorbetriebene Maschinen - Messverfahren zur Ermittlung der
Schwingungsemission - Teil 8: Sägen, Feilen und Maschinen für Poliernadeln mit hin-
und hergehender Bewegung sowie kleine Sägen mit Schwing- oder Drehbewegung (ISO
28927-8:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour l'évaluation de l'émission de
vibrations - Partie 8: Scies, polisseuses et limes alternatives, et petites scies oscillantes
ou circulaires - Amendement 1: Polisseuses, forces d'avance modifiées (ISO 28927-
8:2009/Amd 1:2015)
Ta slovenski standard je istoveten z: EN ISO 28927-8:2009/A1:2015
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
SIST EN ISO 28927-8:2010/A1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
EN ISO 28927-8:2009/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 25.140.10; 13.160
English Version
Hand-held portable power tools - Test methods for
evaluation of vibration emission - Part 8: Saws, polishing
and filing machines with reciprocating action and small
saws with oscillating or rotating action - Amendment 1:
Polishing machines, modified feed forces (ISO 28927-
8:2009/Amd 1:2015)
Machines à moteur portatives - Méthodes d'essai pour Handgehaltene motorbetriebene Maschinen -
l'évaluation de l'émission de vibrations - Partie 8: Scies, Messverfahren zur Ermittlung der
polisseuses et limes alternatives, et petites scies Schwingungsemission - Teil 8: Sägen, Feilen und
oscillantes ou circulaires - Amendement 1: Polisseuses, Maschinen für Poliernadeln mit hin- und hergehender
forces d'avance modifiées (ISO 28927-8:2009/Amd Bewegung sowie kleine Sägen mit Schwing- oder
1:2015) Drehbewegung (ISO 28927-8:2009/Amd 1:2015)
This amendment A1 modifies the European Standard EN ISO 28927-8:2009; it was approved by CEN on 6 June 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28927-8:2009/A1:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
EN ISO 28927-8:2009/A1:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
EN ISO 28927-8:2009/A1:2015 (E)
European foreword
This document (EN ISO 28927-8:2009/A1:2015) has been prepared by Technical Committee ISO/TC
108 "Mechanical vibration, shock and condition monitoring" in collaboration with Technical Committee
CEN/TC 231 “Mechanical vibration and shock” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 28927-8:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and
conflicting national standards shall be withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 28927-8:2009/Amd 1:2015 has been approved by CEN as EN ISO 28927-
8:2009/A1:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
INTERNATIONAL ISO
STANDARD 28927-8
First edition
2009-12-15
Hand-held portable power tools — Test
methods for evaluation of vibration
emission —
Part 8:
Saws, polishing and filing machines with
reciprocating action and small saws with
oscillating or rotating action
Machines à moteur portatives — Méthodes d'essai pour l'évaluation de
l'émission de vibrations —
Partie 8: Scies, polisseuses et limes alternatives, et petites scies
oscillantes ou circulaires
Reference number
ISO 28927-8:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
Contents Page
Foreword .iv
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms, definitions and symbols .2
3.1 Terms and definitions .2
3.2 Symbols.2
4 Basic standards and vibration test codes .3
5 Description of the family of machines .3
6 Characterization of vibration.6
6.1 Direction of measurement .6
6.2 Location of measurements.6
6.3 Magnitude of vibration.11
6.4 Combination of vibration directions.11
7 Instrumentation requirements.11
7.1 General .11
7.2 Mounting of transducers .11
7.2.1 Specification of transducer .11
7.2.2 Fastening of transducers.12
7.3 Frequency weighting filter.12
7.4 Integration time.12
7.5 Auxiliary equipment .12
7.6 Calibration.12
8 Testing and operating conditions of the machinery.13
8.1 General .13
8.2 Operating conditions .13
8.2.1 Pneumatic machines.13
8.2.2 Hydraulic machines.13
8.2.3 Electrical machines .13
8.3 Other quantities to be specified.13
8.4 Attached equipment, work piece and task.13
8.4.1 General .13
8.4.2 Test set-up, conditions and procedures.14
8.5 Operators.17
9 Measurement procedure and validity.17
9.1 Reported vibration values .17
9.2 Declaration and verification of the vibration emission value .18
10 Measurement report .18
Annex A (informative) Model test report for vibration emission of saws and files.20
Annex B (normative) Determination of uncertainty.22
Bibliography.24
© ISO 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 28927-8 was prepared by Technical Committee ISO/TC 118, Compressors and pneumatic tools,
machines and equipment, Subcommittee SC 3, Pneumatic tools and machines.
This first edition of ISO 28927-8 cancels and replaces ISO 8662-12:1997, of which it constitutes a technical
revision. The most important changes are
⎯ vibration measurement in three axes and at both hand positions,
⎯ new transducer positions, and
⎯ improved definition of transducer positions and orientation.
ISO 28927 consists of the following parts, under the general title Hand-held portable power tools — Test
methods for evaluation of vibration emission:
1)
⎯ Part 1: Angle and vertical grinders
2)
⎯ Part 2: Wrenches, nutrunners and screwdrivers
3)
⎯ Part 3: Polishers and rotary, orbital and random orbital sanders
4)
⎯ Part 4: Straight grinders
1) Together with Part 4, replaces ISO 8662-4, Hand-held portable power tools — Measurement of vibrations at the
handle — Part 4: Grinders.
2) Replaces ISO 8662-7, Hand-held portable power tools — Measurement of vibrations at the handle — Part 7:
Wrenches, screwdrivers nut runners with impact, impulse and ratcheting action. All screwdrivers and nutrunners except for
one-shot tools now covered.
3) Replaces ISO 8662-8, Hand-held portable power tools — Measurement of vibrations at the handle — Part 8:
Polishers and rotary, orbital and random orbital sanders.
4) Together with Part 1, replaces ISO 8662-4, Hand-held portable power tools — Measurement of vibrations at the
handle — Part 4: Grinders.
iv © ISO 2009 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
5)
⎯ Part 5: Drills and impact drills
6)
⎯ Part 6: Rammers
7)
⎯ Part 7: Nibblers and shears
⎯ Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or
rotating action
8)
⎯ Part 9: Scaling hammers and needle scalers
9)
⎯ Part 10: Percussive drills, hammers and breakers
10)
⎯ Part 11: Stone hammers
5) Replaces ISO 8662-6, Hand-held portable power tools — Measurement of vibrations at the handle — Part 6: Impact
drills. Non-impacting drills now covered.
6) Replaces ISO 8662-9, Hand-held portable power tools — Measurement of vibrations at the handle —Part 9: Rammers.
7) Replaces ISO 8662-10, Hand-held portable power tools — Measurement of vibrations at the handle — Part 10:
Nibblers and shears.
8) Together with Part 11, replaces ISO 8662-14, Hand-held portable power tools — Measurement of vibrations at the
handle — Part 14: Stone-working tools and needle scalers.
9) Replaces ISO 8662-2, Hand-held portable power tools — Measurement of vibrations at the handle — Part 2: Chipping
hammers and riveting hammers, ISO 8662-3, Hand-held portable power tools — Measurement of vibrations at the
handle — Part 3: Rock drills and rotary hammers, and ISO 8662-5, Hand-held portable power tools — Measurement of
vibrations at the handle — Part 5: Pavement breakers and hammers for construction work. Chipping and riveting hammers,
rock drills and rotary hammers all covered.
10) Together with Part 9, replaces ISO 8662-14, Hand-held portable power tools — Measurement of vibrations at the
handle — Part 14: Stone-working tools and needle scalers.
© ISO 2009 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
Introduction
This document is a type-C standard as stated in ISO 12100.
When requirements of this type-C standard are different from those which are stated in type-A or -B standards,
the requirements of this type-C standard take precedence over the requirements of the other standards for
machines that have been designed and built according to the requirements of this type-C standard.
The vibration test codes for portable hand-held machines given in ISO 28927 are based on ISO 20643, which
gives general specifications for the measurement of the vibration emission of hand-held and hand-guided
machinery. ISO 28927 specifies the operation of the machines under type-test conditions and other
requirements for the performance of type tests. The structure/numbering of its clauses follows that of
ISO 20643.
The basic principle for transducer positioning first introduced in the EN 60745 series of European standards is
followed, representing a deviation from ISO 20643 for reasons of consistency. The transducers are primarily
positioned next to the hand in the area between the thumb and the index finger, where they give the least
disturbance to the operator gripping the machine.
It has been found that vibrations generated by files and saws vary considerably in typical use. For
reciprocating saws and files, the motion of reciprocation is the prime source of vibration. The variation is
largely due to variations in the handling of the machine and the characteristics of the material worked on,
while differences in the support of the material and counterbalancing of the machine also cause differences in
vibration.
This part of ISO 28927 uses a working process where the machine is used to cut sheet metal or wood. In
order to achieve good reproducibility, it is important that the material have good support and that the files or
saw blades used be in good condition. The procedures of ISO 5349 are required whenever exposure at the
workplace is to be assessed.
The values obtained are type-test values intended to be representative of the average of the upper quartile of
typical vibration magnitudes in real-world use of the machines. However, the actual magnitudes will vary
considerably from time to time and depend on many factors, including the operator, the task and the inserted
tool or consumable. The state of maintenance of the machine itself might also be of importance. Under real
working conditions the influences of the operator and process can be particularly important at low magnitudes.
2
It is therefore not recommended that emission values below 2,5 m/s be used for estimating the vibration
2
magnitude under real working conditions. In such cases, 2,5 m/s is the recommended vibration magnitude for
estimating the machine vibration.
If accurate values for a specific work place are required, then measurements (according to ISO 5349) in that
work situation could be necessary. Vibration values measured in real working conditions can be either higher
or lower than the values obtained using this part of ISO 28927.
Higher vibration magnitudes can easily occur in real working situations, depending on the characteristics of
the material being worked on, the condition of the inserted tool and the handling of the machine.
The vibration test codes given in ISO 28927 supersede those given in ISO 8662, whose parts have been
replaced by the corresponding parts of ISO 28927 (see Foreword).
NOTE ISO 8662-11, Hand-held portable power tools — Measurement of vibrations at the handle — Part 11: Fastener
driving tools, and ISO 8662-13, Hand-held portable power tools — Measurement of vibrations at the handle — Part 13:
Die grinders, could be replaced by future parts of ISO 28927.
vi © ISO 2009 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
INTERNATIONAL STANDARD ISO 28927-8:2009(E)
Hand-held portable power tools — Test methods for evaluation
of vibration emission —
Part 8:
Saws, polishing and filing machines with reciprocating action
and small saws with oscillating or rotating action
1 Scope
This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the
handles of hand-held, power-driven saws, polishing and filing machines with reciprocating action and small
saws with oscillating or rotating action. It is a type-test procedure for establishing the magnitude of vibration in
the gripping areas of a machine run under specified test conditions. It is intended that the results be used to
compare different models of the same type of machine.
This part of ISO 28927 is applicable to reciprocating files intended for surface finishing equipped with a file or
polishing tool, saws intended for parting sheets, plaster for medical use or wood, or equipped with a saw blade
for use on all kinds of materials, and small circular saws primarily intended for cutting metal or composite
materials (see Clause 5), whether driven pneumatically or by other means. It is not applicable to files that are
normally used with one hand on the file blade, nor to large circular saws intended for cutting wood.
NOTE To avoid confusion with the terms “power tool” and “inserted tool”, machine is used for the former throughout
this document.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 2787:1984, Rotary and percussive pneumatic tools — Performance tests
ISO 5349:2001 (all parts), Mechanical vibration — Measurement and evaluation of human exposure to hand-
transmitted vibration
ISO 5391:2003, Pneumatic tools and machines — Vocabulary
ISO 17066:2007, Hydraulic tools — Vocabulary
ISO 20643:2005, Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation
of vibration emission
EN 12096:1997, Mechanical vibration — Declaration and verification of vibration emission values
ISO 16893-1:2008, Wood-based panels — Particleboard — Part 1: Classifications
© ISO 2009 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
3 Terms, definitions and symbols
For the purposes of this document, the terms and definitions given in ISO 5391, ISO 17066 and ISO 20643,
and the following terms, definitions and symbols, apply.
3.1 Terms and definitions
3.1.1
circular saw
machine equipped with a rotary saw blade
NOTE Adapted from ISO 5391:2003, definition 2.1.8.1.
3.1.2
oscillation saw
machine equipped with a saw blade that moves with an angular reciprocating movement
3.1.3
reciprocating saw
sabre saw
hack saw
machine with a rotary or reciprocating motor, adapted to drive a saw blade in a reciprocating motion
[ISO 5391:2003, definition 2.1.8.3]
3.1.4
jig saw
saw with a reciprocating and pendulum motion
[ISO 5391:2003, definition 2.1.8.5]
3.1.5
reciprocating filing and polishing machine
machine with a rotary and reciprocation motor that drives a file or polishing inserted tool in an angular or
straight reciprocating motion
3.2 Symbols
Symbol Description Unit
2
a root-mean-square (r.m.s.) single-axis acceleration value of the frequency- m/s
hw
weighted hand-transmitted vibration
2
a vibration total value of frequency-weighted r.m.s. acceleration; root sum of m/s
hv
squares of a values for the three measured axes of vibration
hw
2
a arithmetic mean value of a values of runs for single operator using one m/s
hv hv
hand position
2
a arithmetic mean value of a values for all operators for one hand position m/s
h hv
2
a arithmetic mean value of a values for one hand position on several m/s
h h
machines
2
a declared vibration emission value m/s
hd
2
s standard deviation for a test series (for a sample, s) m/s
n1−
2
σ standard deviation of reproducibility (for a population, σ) m/s
R
C coefficient of variation for a test series
v
2
K uncertainty m/s
2 © ISO 2009 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
4 Basic standards and vibration test codes
This part of ISO 28297 is based on the requirements of ISO 20643 and corresponds to its structure in respect
of clause subjects and numbering except for the annexes.
Annex A presents a model test report and Annex B the means for determining the uncertainty, K.
5 Description of the family of machines
This part of ISO 29827 applies to hand-held machines intended for surface finishing, equipped with a file or
polishing tool, and to hand-held machines intended for parting sheets, plaster for medical use or wood, or for
use on all kinds of materials, and for cutting metal or composite materials.
Figures 1 to 9 show examples of typical saws and files covered by this part of ISO 29827.
Figure 1 — Straight oscillating saw
Figure 2 — Small circular saw
© ISO 2009 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
Figure 3 — Reciprocating saw with bow handle
Figure 4 — Reciprocating saw with pistol grip
Figure 5 — Straight reciprocating saw
4 © ISO 2009 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
Figure 6 — Jig saw
Figure 7 — Straight reciprocating file
Figure 8 — Angle reciprocating file
© ISO 2009 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST EN ISO 28927-8:2010/A1:2016
ISO 28927-8:2009(E)
Figure 9 — Angle reciprocating file — Alternative design
6 Characterization of vibration
6.1 Direction of measurement
The vibration transmitted to the hand shall be measured and reported for three directions of an orthogonal
coordinate system. At each hand position, the vibration shall be measured simultaneously in the three
directions
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.