SIST EN 13445-2:2002/A3:2009

Unfired pressure vessels - Part 2: Materials

Unbefeuerte Druckbehälter - Teil 2: Werkstoffe

Récipients sous pression non soumis à la flamme - Partie 2: Matériaux

Neogrevane tlačne posode - 2. del: Materiali

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2009
• Withdrawal Date: 10-Nov-2009
• ICS: 23.020.32 - Pressure vessels
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Nov-2009
• Due Date: 26-Nov-2009
• Completion Date: 11-Nov-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13445-2:2002/A3:2009 - Unfired pressure vessels - Part 2: Materials

Relations

• Amends: SIST EN 13445-2:2002 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 01-Apr-2009
• Replaced By: SIST EN 13445-2:2009 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 01-Dec-2009
• Amends: SIST EN 13445-2:2002 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13445-2:2002/A3:2009
01-april-2009
1HRJUHYDQHWODþQHSRVRGHGHO0DWHULDOL
Unfired pressure vessels - Part 2: Materials
Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
Récipients sous pression non soumis à la flamme - Partie 2: Matériaux
Ta slovenski standard je istoveten z: EN 13445-2:2002/A3:2009
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 13445-2:2002/A3:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-2:2002/A3:2009

---------------------- Page: 2 ----------------------

SIST EN 13445-2:2002/A3:2009
EUROPEAN STANDARD
EN 13445-2:2002/A3
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2009
ICS 23.020.30
English Version
Unfired pressure vessels - Part 2: Materials
Récipients sous pression non soumis à la flamme - Partie Unbefeuerte Druckbehälter - Teil 2: Werkstoffe
2: Matériaux
This amendment A3 modifies the European Standard EN 13445-2:2002; it was approved by CEN on 9 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-2:2002/A3:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Contents Page
Foreword .3
2 Normative references .4
4 Requirements for materials to be used for pressure-bearing parts .5
4.3.1 European Standards .5
Annex A (normative) Grouping system for steels for pressure equipment .6
Annex E (informative) European steels for pressure purposes .8
E.1 European Standards for steels and steel components for pressure purposes .8
E.2 European standardised steels grouped according to product forms .9

2

---------------------- Page: 4 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Foreword
This document (EN 13445-2:2002/A3:2009) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 13445-2:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by July 2009, and conflicting national
standards shall be withdrawn at the latest by July 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document.
This document includes the text of the amendment itself. The corrected pages of EN 13445-2 will be delivered
as issue 35 of the standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
2 Normative references
Delete the following references from Clause 2 and move to the Bibliography:
EN 10028-1:2007, Flat products made of steels for pressure purposes — Part 1: General requirements
EN 10028-2:2003, Flat products made of steels for pressure purposes — Part 2: Non-alloy and alloy steels
with specified elevated temperature properties
EN 10028-3:2003, Flat products made of steels for pressure purposes — Part 3: Weldable fine grain steels,
normalized
EN 10028-4:2003, Flat products made of steels for pressure purposes — Part 4: Nickel alloy steels with
specified low temperature properties
EN 10028-5:2003, Flat products made of steels for pressure purposes — Part 5: Weldable fine grain steels,
thermomechanically rolled
EN 10028-6:2003, Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels,
quenched and tempered
EN 10028-7:2007, Flat products made of steels for pressure purposes — Part 7: Stainless steels
EN 10213:2007, Steel castings for pressure purposes
EN 10216-1:2002, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1:
Non-alloy steel tubes with specified room temperature properties
EN 10216-2:2002, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2:
Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2002, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3:
Alloy fine grain steel tubes
EN 10216-4:2002, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4:
Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-5:2002, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 5:
Stainless steel tubes
EN 10217-1:2002, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1:
Non-alloy steel tubes with specified room temperature properties
EN 10217-2:2002, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2:
Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3:2002, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Alloy
fine grain steel tubes
EN 10217-4:2002, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4:
Electric welded non-alloy steel tubes with specified low temperature properties
4

---------------------- Page: 6 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
EN 10217-5:2002, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5:
Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-6:2002, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6:
Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-7:2005, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 7:
Stainless steel tubes
EN 10222-1:1998, Steel forgings for pressure purposes — Part 1: General requirements for open die forgings
EN 10222-2:1999, Steel forgings for pressure purposes — Part 2: Ferritic and martensitic steels with specified
elevated temperature properties
EN 10222-3:1998, Steel forgings for pressure purposes — Part 3: Nickel steels with specified low temperature
properties
EN 10222-4:1998, Steel forgings for pressures purposes — Part 4: Weldable fine grain steels with high proof
strength
EN 10222-5:1999, Steel forgings for pressure purposes — Part 5: Martensitic, austenitic and austenitic-ferritic
stainless steels
EN 10269:1999, Steels and nickel alloys for fasteners with specified elevated and/or low temperature
properties
EN 10272:2007, Stainless steel bars for pressure purposes
EN 10273:2007, Hot rolled weldable steel bars for pressure purposes with specified elevated temperature
properties
4 Requirements for materials to be used for pressure-bearing parts
The text of clause 4.3.1 shall be changed to read as follows:
4.3.1 European Standards
The European Standards for plates, strips, bars, tubes, forgings and castings for pressure purposes shall be
used.
NOTE 1 Table E.2-1 provides an overview on materials for pressure purposes specified in harmonised standards.
NOTE 2 Table E.1-1 contains an informative summary of European Materials Standards referred to and of European
Standards covering components of pressure-bearing parts.
Special provisions due to fabrication and operation shall be taken into account, if appropriate.



The text of Annex A shall be rewritten as follows (see next pages):
5

---------------------- Page: 7 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Annex A
(normative)

Grouping system for steels for pressure equipment
Steels shall be grouped as shown in Table A-1. The figures given in group 1 are referring to the ladle analysis
of the materials. The figures given in group 4 to 10 are based on the element content used in the designation
of the alloys.
Table A-1 — Grouping system for steels (extract from CR ISO 15608:2000)
Sub-
Group Type of steel
group
2
a
1
Steels with a specified minimum yield strength R ≤ 460 N/mm and with analysis in %:
eH
C ≤ 0,25
Si ≤ 0,60
Mn ≤ 1,70
b
Mo ≤ 0,70
S ≤ 0,045
P ≤ 0,045
b
Cu ≤ 0,40
b
Ni ≤ 0,5
b
Cr ≤ 0,3 (0,4 for castings)
Nb ≤ 0,05
b
V ≤ 0,12
Ti ≤ 0,05
2
1.1 Steels with a specified minimum yield strength R ≤ 275 N/mm
eH
2 2
1.2 Steels with a specified minimum yield strength 275 N/mm < R ≤ 360 N/mm
eH
2
1.3 Normalised fine grain steels with a specified minimum yield strength R > 360 N/mm
eH
1.4 Steels with improved atmospheric corrosion resistance whose analysis may exceed the
requirements for the single elements as indicated under 1
2 Thermomechanically treated fine grain steels and cast steels with a specified minimum yield
2
strength R > 360 N/mm
eH
2.1 Thermomechanically treated fine grain steels and cast steels with a specified minimum yield
2 2
strength 360 N/mm < R ≤ 460 N/mm
eH
2.2 Thermomechanically treated fine grain steels and cast steels with a specified minimum yield
2
strength R > 460 N/mm
eH
3 Quenched and tempered steels and precipitation hardened steels except stainless steels with a
2
specified minimum yield strength R > 360 N/mm
eH
3.1 Quenched and tempered steels with a specified minimum yield strength
2 2
360 N/mm < R ≤ 690 N/mm
eH
2
3.2
Quenched and tempered steels with a specified minimum yield strength R > 690 N/mm
eH
3.3 Precipitation hardened steels except stainless steels

6

---------------------- Page: 8 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table A-1 (concluded)
Sub-
Group Type of steel
group
4 Low vanadium alloyed Cr-Mo-(Ni) steels with Mo ≤ 0,7 % and V ≤ 0,1 %
  4.1
Steels with Cr ≤ 0,3 % and Ni ≤ 0,7 %
  4.2 Steels with Cr ≤ 0,7 % and Ni ≤ 1,5 %
c
5
Cr-Mo steels free of vanadium with C ≤ 0,35 %
  5.1
Steels with 0,75 % ≤ Cr ≤ 1,5 % and Mo ≤ 0,7 %
  5.2 Steels with 1,5 % < Cr ≤ 3,5 % and 0,7 < Mo ≤ 1,2 %
  5.3
Steels with 3,5 % < Cr ≤ 7,0 % and 0,4 < Mo ≤ 0,7 %
  5.4 Steels with 7,0 % < Cr ≤ 10 % and 0,7 < Mo ≤ 1,2 %
6 High vanadium alloyed Cr-Mo-(Ni) steels
  6.1
Steels with 0,3 % ≤ Cr ≤ 0,75 %, Mo ≤ 0,7 % and V ≤ 0,35 %
  6.2 Steels with 0,75 % < Cr ≤ 3,5 %, 0,7 % < Mo ≤ 1,2 % and V ≤ 0,35 %
  6.3
Steels with 3,5 % < Cr ≤ 7,0 %, Mo ≤ 0,7 % and 0,45 % ≤ V ≤ 0,55 %
  6.4
Steels with 7,0 % < Cr ≤ 12,5 %, 0,7 % < Mo ≤ 1,2 % and V ≤ 0,35 %
7
Ferritic, martensitic or precipitation hardened stainless steels with C ≤ 0,35 % and
10,5 % ≤ Cr ≤ 30 %
  7.1 Ferritic stainless steels
  7.2 Martensitic stainless steels
  7.3 Precipitation hardened stainless steels
8 Austenitic steels
  8.1
Austenitic stainless steels with Cr ≤ 19 %
  8.2 Austenitic stainless steels with Cr > 19 %
  8.3
Manganese austenitic stainless steels with 4 % < Mn ≤ 12 %
9 Nickel alloyed steels with Ni ≤ 10 %
  9.1
Nickel alloyed steels with Ni ≤ 3 %
  9.2 Nickel alloyed steels with 3 % < Ni ≤ 8 %
  9.3
Nickel alloyed steels with 8 % < Ni ≤ 10 %
10 Austenitic ferritic stainless steels (duplex)
10.1 Austenitic ferritic stainless steels with Cr ≤ 24 %
10.2
Austenitic ferritic stainless steels with Cr > 24 %
a
In accordance with the specification of the steel product standards, R may be replaced by R or R .
eH p0,2 t0.5
b
A higher value is accepted provided that Cr + Mo + Ni + Cu + V ≤ 0,75 %.
c
"Free of vanadium" means not deliberately added to the material.

The text of Annex E shall be rewritten as follows (see next pages):

7

---------------------- Page: 9 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Annex E
(informative)

European steels for pressure purposes
E.1 European Standards for steels and steel components for pressure purposes
Table E.1-1 contains an informative summary on European Standards for steels and steel components for pressure purposes.
Table E.1-1 — European Standards for steels and steel components for pressure purposes
Fine grain steels
Room
Elevated Low
temperature
General Stainless
Thermo-
Product form temperature temperature
a
Quenched
requirements steels
grades
Normalised mechanically
grades grades
and tempered

treated
Plate and strip EN 10028-1 — EN 10028-2 EN 10028-3 EN 10028-5 EN 10028-6 EN 10028-4 EN 10028-7
Rolled bar — — EN 10273 — — — — EN 10272
Seamless tube — EN 10216-1 EN 10216-2 EN 10216-3 — EN 10216-3 EN 10216-4 EN 10216-5
Electric welded tube — EN 10217-1 EN 10217-2 EN 10217-3 — — EN 10217-4 —
Submerged arc
— EN 10217-1 EN 10217-5 EN 10217-3 — — EN 10217-6 —
welded tube
Fusion welded tube — — — — — — — EN 10217-7
Fitting — EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-2 EN 10253-4
Forging including
EN 10222-1 — EN 10222-2 EN 10222-4 — — EN 10222-3 EN 10222-5
forged bars
Casting EN 10213 — EN 10213 — — — EN 10213 EN 10213
Steel for fastener — — EN 10269 — — — EN 10269 EN 10269
a
 room temperature values are given in all standards of this table

8

---------------------- Page: 10 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
E.2 European standardised steels grouped according to product forms
The references in this table do not include the date of the standard, but they are dated references as given in clause Bibliography.
Table E.2-1 — European standardised steels grouped according to product forms
1 2 3 4 5 6 7 8 9 10
Thickness Material
European Material Heat mm group
No Product form Material description Grade Notes
g
Standard number treatment to
min. max.
CR ISO 15608
1 plate and strip EN 10028-2 elevated temperature properties P235GH 1.0345 N 0 250 1.1
2 plate and strip EN 10028-2 elevated temperature properties P265GH 1.0425 N 0 250 1.1
3 plate and strip EN 10028-2 elevated temperature properties P295GH 1.0481 N 0 250 1.2
4 plate and strip EN 10028-2 elevated temperature properties P355GH 1.0473 N 0 250 1.2
e
5 plate and strip EN 10028-2 elevated temperature properties 16Mo3 1.5415 N, NT 0 250 1.2
6 plate and strip EN 10028-2 elevated temperature properties 18MnMo4-5 1.5414 NT 0 150 1.2
7 plate and strip EN 10028-2 elevated temperature properties 18MnMo4-5 1.5414 QT 150 250 1.2
8 plate and strip EN 10028-2 elevated temperature properties 20MnMoNi4-5 1.6311 QT 0 250 3.1
9 plate and strip EN 10028-2 elevated temperature properties 15NiCuMoNb5-6-4 1.6368 NT 0 100 3.1
10 plate and strip EN 10028-2 elevated temperature properties 15NiCuMoNb5-6-4 1.6368 NT, QT 100 150 3.1
11 plate and strip EN 10028-2 elevated temperature properties 15NiCuMoNb5-6-4 1.6368 QT 150 200 3.1
12 plate and strip EN 10028-2 elevated temperature properties 13CrMo4-5 1.7335 NT 0 100 5.1
13 plate and strip EN 10028-2 elevated temperature properties 13CrMo4-5 1.7335 NT,QT 100 150 5.1
14 plate and strip EN 10028-2 elevated temperature properties 13CrMo4-5 1.7335 QT 150 250 5.1
15 plate and strip EN 10028-2 elevated temperature properties 13CrMoSi5-5 1.7336 NT, QT 0 100 5.1
16 plate and strip EN 10028-2 elevated temperature properties 13CrMoSi5-5 1.7336 QT 100 250 5.1
17 plate and strip EN 10028-2 elevated temperature properties 10CrMo9-10 1.7380 NT 0 60 5.2
18 plate and strip EN 10028-2 elevated temperature properties 10CrMo9-10 1.7380 NT,QT 60 100 5.2

     9

---------------------- Page: 11 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table E.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608
19 plate and strip EN 10028-2 elevated temperature properties 10CrMo9-10 1.7380 QT 100 250 5.2
20 plate and strip EN 10028-2 elevated temperature properties 12CrMo9-10 1.7375 NT,QT 0 250 5.2
21 plate and strip EN 10028-2 elevated temperature properties X12CrMo5 1.7362 NT 0 150 5.3
22 plate and strip EN 10028-2 elevated temperature properties X12CrMo5 1.7362 QT 150 250 5.3
23 plate and strip EN 10028-2 elevated temperature properties 13CrMoV9-10 1.7703 NT 0 150 6.2
24 plate and strip EN 10028-2 elevated temperature properties 13CrMoV9-10 1.7703 QT 150 250 6.2
25 plate and strip EN 10028-2 elevated temperature properties 12CrMoV12-10 1.7767 NT 0 150 6.2
26 plate and strip EN 10028-2 elevated temperature properties 12CrMoV12-10 1.7767 QT 150 250 6.2
27 plate and strip EN 10028-2 elevated temperature properties X10CrMoVNb9-1 1.4903 NT 0 150 6.4
28 plate and strip EN 10028-2 elevated temperature properties X10CrMoVNb9-1 1.4903 QT 150 250 6.4
29 plate and strip EN 10028-3 fine grain steel normalised P275NH 1.0487 N 0 250 1.1
30 plate and strip EN 10028-3 fine grain steel normalised P275NL1 1.0488 N 0 250 1.1
31 plate and strip EN 10028-3 fine grain steel normalised P275NL2 1.1104 N 0 250 1.1
32 plate and strip EN 10028-3 fine grain steel normalised P355N 1.0562 N 0 250 1.2
33 plate and strip EN 10028-3 fine grain steel normalised P355NH 1.0565 N 0 250 1.2
34 plate and strip EN 10028-3 fine grain steel normalised P355NL1 1.0566 N 0 250 1.2
35 plate and strip EN 10028-3 fine grain steel normalised P355NL2 1.1106 N 0 250 1.2
36 plate and strip EN 10028-3 fine grain steel normalised P460NH 1.8935 N 0 100 1.3
37 plate and strip EN 10028-3 fine grain steel normalised P460NL1 1.8915 N 0 100 1.3
38 plate and strip EN 10028-3 fine grain steel normalised P460NL2 1.8918 N 0 100 1.3


10

---------------------- Page: 12 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table E.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat Thickness group
No Product form Material description Grade Notes
g
Standard number treatment mm to
CR ISO 15608
39 plate and strip EN 10028-4 low temperature properties 11MnNi5-3 1.6212 N,NT 0 80 9.1
40 plate and strip EN 10028-4 low temperature properties 13MnNi6-3 1.6217 N,NT 0 80 9.1
41 plate and strip EN 10028-4 low temperature properties 15NiMn6 1.6228 N,NT,QT 0 80 9.1
42 plate and strip EN 10028-4 low temperature properties 12Ni14 1.5637 N,NT,QT 0 80 9.2
43 plate and strip EN 10028-4 low temperature properties X12Ni5 1.5680 N,NT,QT 0 50 9.2
44 plate and strip EN 10028-4 low temperature properties X8Ni9+NT640 1.5662 N+NT 0 50 9.3
45 plate and strip EN 10028-4 low temperature properties X8Ni9+QT640 1.5662 QT 0 50 9.3
46 plate and strip EN 10028-4 low temperature properties X8Ni9+QT680 1.5662 N+NT, QT 0 15 9.3
47 plate and strip EN 10028-4 low temperature properties X8Ni9+QT680 1.5662 QT 15 50 9.3
48 plate and strip EN 10028-4 low temperature properties X7Ni9 1.5663 N+NT, QT 0 15 9.3
49 plate and strip EN 10028-4 low temperature properties X7Ni9 1.5663 QT 15 50 9.3
50 plate and strip EN 10028-5 fine grain steel, thermomechanically P355M 1.8821 M 0 63 1.2
f
rolled
51 plate and strip EN 10028-5 fine grain steel, thermomechanically P355ML1 1.8832 M 0 63 1.2
f
rolled
52 plate and strip EN 10028-5 fine grain steel, thermomechanically P355ML2 1.8833 M 0 63 1.2
f
rolled
53 plate and strip EN 10028-5 fine grain steel, thermomechanically P420M 1.8824 M 0 63 2.1
f
rolled
54 plate and strip EN 10028-5 fine grain steel, thermomechanically P420ML1 1.8835 M 0 63 2.1
f
rolled
55 plate and strip EN 10028-5 fine grain steel, thermomechanically P420ML2 1.8828 M 0 63 2.1
f
rolled

     11

---------------------- Page: 13 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table E.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608
56 plate and strip EN 10028-5 fine grain steel, thermomechanically P460M 1.8826 M 0 63 2.1
f
rolled
57 plate and strip EN 10028-5 fine grain steel, thermomechanically P460ML1 1.8837 M 0 63 2.1
f
rolled
58 plate and strip EN 10028-5 fine grain steel, thermomechanically P460ML2 1.8831 M 0 63 2.1
f
rolled
59 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355Q 1.8866 QT 0 150 1.2
60 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355QH 1.8867 QT 0 150 1.2
61 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355QL1 1.8868 QT 0 150 1.2
62 plate and strip EN 10028-6 fine grain steel, quenched/tempered P355QL2 1.8869 QT 0 150 1.2
63 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460Q 1.8870 QT 0 150 3.1
64 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460QH 1.8871 QT 0 150 3.1
65 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460QL1 1.8872 QT 0 150 3.1
66 plate and strip EN 10028-6 fine grain steel, quenched/tempered P460QL2 1.8864 QT 0 150 3.1
67 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500Q 1.8873 QT 0 150 3.1
68 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500QH 1.8874 QT 0 150 3.1
69 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500QL1 1.8875 QT 0 150 3.1
70 plate and strip EN 10028-6 fine grain steel, quenched/tempered P500QL2 1.8865 QT 0 150 3.1
71 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690Q 1.8879 QT 0 150 3.1
72 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690QH 1.8880 QT 0 150 3.1
73 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690QL1 1.8881 QT 0 150 3.1
74 plate and strip EN 10028-6 fine grain steel, quenched/tempered P690QL2 1.8888 QT 0 150 3.1

12

---------------------- Page: 14 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table E.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat Thickness group
No Product form Material description Grade Notes
g
Standard number treatment mm to
CR ISO 15608

75 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiN18-7 1.4318 AT 0 75 8.1

76 plate and strip EN 10028-7 stainless steel, austenitic X2CrNi18-9 1.4307 AT 0 75 8.1

77 plate and strip EN 10028-7 stainless steel, austenitic X2CrNi19-11 1.4306 AT 0 75 8.1

78 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiN18-10 1.4311 AT 0 75 8.1

79 plate and strip EN 10028-7 stainless steel, austenitic X5CrNi18-10 1.4301 AT 0 75 8.1

80 plate and strip EN 10028-7 stainless steel, austenitic X5CrNiN19-9 1.4315 AT 0 75 8.1

81 plate and strip EN 10028-7 stainless steel, austenitic X6CrNi18-10 1.4948 AT 0 75 8.1

82 plate and strip EN 10028-7 stainless steel, austenitic X6CrNi23-13 1.4950 AT 0 75 8.2

83 plate and strip EN 10028-7 stainless steel, austenitic X6CrNi25-20 1.4951 AT 0 75 8.2

84 plate and strip EN 10028-7 stainless steel, austenitic X6CrNiTi18-10 1.4541 AT 0 75 8.1

85 plate and strip EN 10028-7 stainless steel, austenitic X6CrNiTiB18-10 1.4941 AT 0 75 8.1

86 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMo17-12-2 1.4404 AT 0 75 8.1

87 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMoN17-12-2 1.4406 AT 0 75 8.1

88 plate and strip EN 10028-7 stainless steel, austenitic X5CrNiMo17-12-2 1.4401 AT 0 75 8.1

89 plate and strip EN 10028-7 stainless steel, austenitic X6CrNiMoTi17-12-2 1.4571 AT 0 75 8.1

90 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMo17-12-3 1.4432 AT 0 75 8.1

91 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMo18-14-3 1.4435 AT 0 75 8.1

92 plate and strip EN 10028-7 stainless steel, austenitic X2CrNiMoN17-13-5 1.4439 AT 0 75 8.1

93 plate and strip EN 10028-7 stainless steel, austenitic X1NiCrMoCu25-20-5 1.4539 AT 0 75 8.2

94 plate and strip EN 10028-7 stainless steel, austenitic X5NiCrAlTi31-20 1.4958 AT 0 75 8.2

     13

---------------------- Page: 15 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table E.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
Heat
European Material Thickness group
No Product form Material description Grade Notes
g
Standard number mm to
treatment
CR ISO 15608

95 plate and strip EN 10028-7 stainless steel, austenitic X5NiCrAlTi31-20+RA 1.4958+RA AT+RA 0 75 8.2

96 plate and strip EN 10028-7 stainless steel, austenitic X8NiCrAlTi32-21 1.4959 AT 0 75 8.2

97 plate and strip EN 10028-7 stainless steel, austenitic X3CrNiMoBN17-13-3 1.4910 AT 0 75 8.2

98 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNi25-21 1.4335 AT 0 75 8.2

99 plate and strip EN 10028-7 stainless steel, austenitic, special X6CrNiNb18-10 1.4550 AT 0 75 8.1

100 plate and strip EN 10028-7 stainless steel, austenitic, special X8CrNiNb16-13 1.4961 AT 0 75 8.1

101 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNiMoN25-22-2 1.4466 AT 0 75 8.2

102 plate and strip EN 10028-7 stainless steel, austenitic, special X6CrNiMoNb17-12-2 1.4580 AT 0 75 8.1

103 plate and strip EN 10028-7 stainless steel, austenitic, special X2CrNiMoN17-13-3 1.4429 AT 0 75 8.1

104 plate and strip EN 10028-7 stainless steel, austenitic, special X3CrNiMoN17-13-3 1.4436 AT 0 75 8.1

105 plate and strip EN 10028-7 stainless steel, austenitic, special X2CrNiMoN18-12-4 1.4434 AT 0 75 8.1

106 plate and strip EN 10028-7 stainless steel, austenitic, special X2CrNiMo18-15-4 1.4438 AT 0 75 8.1

107 plate and strip EN 10028-7 stainless steel, austenitic, special X1NiCrMoCu31-27-4 1.4563 AT 0 75 8.2

108 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNiMoCuN25-25-5 1.4537 AT 0 75 8.2

109 plate and strip EN 10028-7 stainless steel, austenitic, special X1CrNiMoCuN20-18-7 1.4547 AT 0 75 8.2

110 plate and strip EN 10028-7 stainless steel, austenitic, special X1NiCrMoCuN25-20-7 1.4529 AT 0 75 8.2
c
111 plate and strip EN 10028-7 stainless steel, austenitic-ferritic X2CrNiN23-4 1.4362 AT 0 75 10.1
c
112 plate and strip EN 10028-7 stainless steel, austenitic-ferritic X2CrNiMoN22-5-3 1.4462 AT 0 75 10.1
c
113 plate and strip EN 10028-7 stain, steel, austenitic-ferritic, special X2CrNiMoCuN25-6-3 1.4507 AT 0 75 10.2
c
114 plate and strip EN 10028-7 stain, steel, austenitic-ferritic, special X2CrNiMoN25-7-4 1.4410 AT 0 75 10.2
c
115 plate and strip EN 10028-7 stain, steel, austenitic-ferritic, special X2CrNiMoCuWN25-7-4 1.4501 AT 0 75 10.2
14

---------------------- Page: 16 ----------------------

SIST EN 13445-2:2002/A3:2009
EN 13445-2:2002/A3:2009 (E)
Table E.2-1 (continued)
1 2 3 4 5 6 7 8 9 10
Material
European Material Heat Thickness group
No Product form Material description Grade Notes
g
Standard number treatment mm to
CR ISO 15608
e
116 bar EN 10272 stainless steel, martensitic X4CrNiMo16-5-1 1.4418 QT760 0 160 7.2

117 bar EN 10272 stainless steel, austenitic X2CrNi18-9 1.4307 AT 0 250 8.1

118 bar EN 10272 stainless steel, austenitic X2CrNi19-11 1.4306 AT 0 250 8.1

119 bar EN 10272 stainless steel, austenitic X2CrNiN18-10 1.4311 AT 0 250 8.1

120 bar EN 10272 stainless steel, austenitic X5CrNi18-10 1.4301 AT 0 250 8.1

121 bar EN 1027
...