SIST EN ISO 12100-2:2004/A1:2010
(Amendment)Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles - Amendment 1 (ISO 12100-2:2003/Amd 1:2009)
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles - Amendment 1 (ISO 12100-2:2003/Amd 1:2009)
Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsätze - Teil 2: Technische Leitsätze - Änderung 1 (ISO 12100-2:2003/Amd 1:2009)
Sécurité des machines - Notions fondamentales, principes généraux de conception - Partie 2: Principes techniques - Amendement 1 (ISO 12100-2:2003/Amd 1:2009)
Varnost strojev - Osnovni pojmi, splošna načela načrtovanja - 2. del: Tehnična načela - Dopolnilo 1 (ISO 12100-2:2003/Amd 1:2009)
Amandma A1:2010 je dodatek k standardu SIST EN ISO 12100-2:2004
Ta standard določa tehnična načela v pomoč načrtovalcem pri doseganju varnosti pri načrtovanju strojev. ISO 12100-2 je namenjen za uporabo skupaj z ISO 12100-1 ob upoštevanju rešitve za določeno težavo. Dva dela ISO 12100 sta lahko uporabljena ločeno od drugih dokumentov ali kot osnova za pripravo drugih standardov tipa A, B ali C. Ta standard se ne ukvarja s škodo, povzročeno na domačih živalih, lastnini ali okolju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12100-2:2004/A1:2010
01-marec-2010
9DUQRVWVWURMHY2VQRYQLSRMPLVSORãQDQDþHODQDþUWRYDQMDGHO 7HKQLþQD
QDþHOD'RSROQLOR ,62 $PG
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical
principles - Amendment 1 (ISO 12100-2:2003/Amd 1:2009)
Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsätze - Teil 2:
Technische Leitsätze - Änderung 1 (ISO 12100-2:2003/Amd 1:2009)
Sécurité des machines - Notions fondamentales, principes généraux de conception -
Partie 2: Principes techniques - Amendement 1 (ISO 12100-2:2003/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 12100-2:2003/A1:2009
ICS:
01.040.13 Varstvo okolja in zdravja. Environment and health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.110 Varnost strojev Safety of machinery
SIST EN ISO 12100-2:2004/A1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
EUROPEAN STANDARD
EN ISO 12100-2:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 13.110
English Version
Safety of machinery - Basic concepts, general principles for
design - Part 2: Technical principles - Amendment 1 (ISO
12100-2:2003/Amd 1:2009)
Sécurité des machines - Notions fondamentales, principes Sicherheit von Maschinen - Grundbegriffe, allgemeine
généraux de conception - Partie 2: Principes techniques - Gestaltungsleitsätze - Teil 2: Technische Leitsätze -
Amendement 1 (ISO 12100-2:2003/Amd 1:2009) Änderung 1 (ISO 12100-2:2003/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 12100-2:2003; it was approved by CEN on 13 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12100-2:2003/A1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
EN ISO 12100-2:2003/A1:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
EN ISO 12100-2:2003/A1:2009 (E)
Foreword
This document (EN ISO 12100-2:2003/A1:2009) has been prepared by Technical Committee ISO/TC 199
"Safety of machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 12100:2003 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and
conflicting national standards shall be withdrawn at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12100-2:2003/Amd 1:2009 has been approved by CEN as a EN ISO 12100-2:2003/A1:2009
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
EN ISO 12100-2:2003/A1:2009 (E)
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 98/37/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
EN ISO 12100-2:2003/A1:2009 (E)
Annex ZB
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the
scope of this standard.
5
---------------------- Page: 7 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
---------------------- Page: 8 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
INTERNATIONAL ISO
STANDARD 12100-2
First edition
2003-11-01
AMENDMENT 1
2009-06-01
Safety of machinery — Basic concepts,
general principles for design —
Part 2:
Technical principles
AMENDMENT 1
Sécurité des machines — Notions fondamentales, principes généraux
de conception —
Partie 2: Principes techniques
AMENDEMENT 1
Reference number
ISO 12100-2:2003/Amd.1:2009(E)
©
ISO 2009
---------------------- Page: 9 ----------------------
SIST EN ISO 12100-2:2004/A1:2010
ISO 12100-2:2003/Amd.1:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall no
...
SLOVENSKI STANDARD
SIST EN ISO 12100-2:2004/oprA1:2008
01-marec-2008
9DUQRVWVWURMHY2VQRYQLSRMPLVSORãQDQDþHODQDþUWRYDQMDGHO 7HKQLþQD
QDþHOD'RSROQLOR ,62 '$0
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical
principles - Amendment 1 (ISO 12100-2:2003/DAM 1:2008)
Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsätze - Teil 2:
Technische Leitsätze - Änderung 1 (ISO 12100-2:2003/DAM 1:2008)
Sécurité des machines - Notions fondamentales, principes généraux de conception -
Partie 2: Principes techniques - Amendement 1 (ISO 12100-2:2003/DAM 1:2008)
Ta slovenski standard je istoveten z: EN ISO 12100-2:2003/prA1
ICS:
01.040.13
13.110
SIST EN ISO 12100-2:2004/oprA1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
EN ISO 12100-2:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2008
ICS 01.040.13; 13.110
English Version
Safety of machinery - Basic concepts, general principles for
design - Part 2: Technical principles - Amendment 1 (ISO
12100-2:2003/DAM 1:2008)
Sécurité des machines - Notions fondamentales, principes Sicherheit von Maschinen - Grundbegriffe, allgemeine
généraux de conception - Partie 2: Principes techniques - Gestaltungsleitsätze - Teil 2: Technische Leitsätze -
Amendement 1 (ISO 12100-2:2003/DAM 1:2008) Änderung 1 (ISO 12100-2:2003/DAM 1:2008)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 114.
This draft amendment A1, if approved, will modify the European Standard EN ISO 12100-2:2003. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12100-2:2003/prA1:2008: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 12100-2:2003/prA1:2008 (E)
Contents Page
Foreword.3
2
---------------------- Page: 3 ----------------------
EN ISO 12100-2:2003/prA1:2008 (E)
Foreword
This document (EN ISO 12100-2:2003/prA1:2008) has been prepared by Technical Committee ISO/TC 199
"Safety of machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the
secretariat of which is held by DIN.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
Endorsement notice
The text of ISO/DAM 12100-2:2008 has been approved by CEN as a EN ISO 12100-2:2003/prA1:2008
without any modification.
3
---------------------- Page: 4 ----------------------
DRAFT AMENDMENT ISO 12100-2:2003/DAmd 1
ISO/TC 199 Secretariat: DIN
Voting begins on: Voting terminates on:
2008-01-10 2008-06-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Safety of machinery — Basic concepts, general principles for
design —
Part 2:
Technical principles
AMENDMENT 1
Sécurité des machines — Notions fondamentales, principes généraux de conception —
Partie 2: Principes techniques
AMENDEMENT 1
ICS 13.110
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008
---------------------- Page: 5 ----------------------
ISO 12100-2:2003/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2008 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 12100-2:2003/DAmd 1:2007
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Amendment 1 to ISO 12100-2:2003 was prepared by Technical Committee ISO/TC 199, Safety of machinery,
and by Technical Committee CEN/TC 114, Safety of machinery in collaboration.
© ISO 2007 – All rights reserved iii
DRAFT 2008
---------------------- Page: 7 ----------------------
DRAFT AMENDMENT ISO 12100-2:2003/DAmd 1:2007
Safety of machinery — Basic concepts, general principles for
design —
Part 2:
Technical principles
AMENDMENT 1
In accordance with ISO Guide 78:2007 the aim of this Amendment is to support regional technical regulations
for machinery safety according to the principles of UNECE Recommendation L.
This draft Amendment proposes minor technical changes to the existing International Standard to ensure
compliance of this document with the relevant Essential Requirements of the European Machinery Directive
which has been recently changed by a new edition. The new Directive 2006/42/E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.