Glass in building - Basic soda lime silicate glass products - Part 2: Drawn sheet glass

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for drawn sheet glass, as defined in FpEN 572-1:2011, for use in building. This European Standard applies only to drawn sheet glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on drawn sheet glass in sizes other than those covered by this European Standard.

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 4: Gezogenes Flachglas

Diese Europäische Norm legt die Anforderungen an Maße und Mindestqualität (in Bezug auf optische und sichtbare Fehler) für gezogenes Flachglas zur Anwendung im Bauwesen, wie es in FprEN 572 1:2011 definiert ist, fest.
Diese Europäische Norm ist nur für gezogenes Flachglas, das in rechtwinkligen Scheiben und Standardabmessungen geliefert wird, anwendbar.
EN 572 8 informiert über gezogenes Flachglas in anderen als in dieser Europäischen Norm aufgeführten Abmessungen.

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 4: Verre étiré

La présente Norme européenne détermine les exigences dimensionnelles et les exigences qualitatives minimales (concernant les défauts optiques et les défauts d'aspect) pour le verre étiré, tel que défini dans le EN 572-1:2012, pour l'utilisation dans la construction.
La présente Norme européenne ne s’applique qu’au verre étiré fourni en feuilles rectangulaires et en dimensions standard.
L’EN 572-8 fournit des informations sur le verre étiré fourni dans des dimensions autres que celles couvertes par la présente Norme européenne.

Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 4. del: Vlečeno steklo

Ta evropski standard določa zahteve glede mer in minimalne kakovosti (v zvezi z optičnimi in vizualnimi napakami) za vlečeno steklo, kot je določeno v standardu FpEN 572-1:2011, za uporabo v gradbeništvu. Ta evropski standard se nanaša le na vlečeno steklo, dobavljeno kot pravokotno steklo in v velikostih na zalogi. EN 572-8 vsebuje informacije o vlečenem steklu, razen za velikosti, vključene v tem evropskem standardu.

General Information

Status
Published
Public Enquiry End Date
28-Feb-2012
Publication Date
25-Sep-2012
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Jul-2012
Due Date
01-Oct-2012
Completion Date
26-Sep-2012

Relations

Buy Standard

Standard
EN 572-4:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 572-4:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 572-4:2012
01-oktober-2012
1DGRPHãþD
SIST EN 572-4:2004
6WHNORYJUDGEHQLãWYX2VQRYQLL]GHONLL]QDWULMNDOFLMHYHJDVLOLNDWQHJDVWHNOD
GHO9OHþHQRVWHNOR
Glass in building - Basic soda lime silicate glass products - Part 2: Drawn sheet glass
Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 4: Gezogenes
Flachglas
Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 4:
Verre étiré
Ta slovenski standard je istoveten z: EN 572-4:2012
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 572-4:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 572-4:2012

---------------------- Page: 2 ----------------------

SIST EN 572-4:2012


EUROPEAN STANDARD
EN 572-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2012
ICS 81.040.20 Supersedes EN 572-4:2004
English Version
Glass in building - Basic soda lime silicate glass products - Part
4: Drawn sheet glass
Verre dans la construction - Produits de base: verre de Glas im Bauwesen - Basiserzeugnisse aus Kalk-
silicate sodo-calcique - Partie 4: Verre étiré Natronsilicatglas - Teil 4: Gezogenes Flachglas
This European Standard was approved by CEN on 11 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 572-4:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 572-4:2012
EN 572-4:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Dimensional requirements .6
4.1 Thickness .6
4.1.1 General .6
4.1.2 Tolerances .6
4.2 Length, width and squareness .6
5 Quality requirements .7
5.1 General .7
5.2 Methods of observation and measurement .7
5.2.1 Optical faults of drawn sheet glass .7
5.2.2 Visual faults .7
5.3 Acceptance levels .8
6 Designation .9
Bibliography . 10

2

---------------------- Page: 4 ----------------------

SIST EN 572-4:2012
EN 572-4:2012 (E)
Foreword
This document (EN 572-4:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in building”,
the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 572-4:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This edition is a revision of EN 572-4:2004. The main change in this edition is a new method of determination
of squareness.
This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following
parts:
 Part 1: Definitions and general physical and mechanical properties;
 Part 2: Float glass;
 Part 3: Polished wired glass;
 Part 4: Drawn sheet glass;
 Part 5: Patterned glass;
 Part 6: Wired patterned glass;
 Part 7: Wired or unwired channel shaped glass;
 Part 8: Supplied and final cut sizes;
 Part 9: Evaluation of conformity/Product standard.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 572-4:2012
EN 572-4:2012 (E)
1 Scope
This European Standard specifies dimensional and minimum quality requirements (in respect of optical and
visual faults) for drawn sheet glass, as defined in EN 572-1:2012, for use in building.
This European Standard applies only to drawn sheet glass supplied in rectangular panes and in stock sizes.
EN 572-8 gives information on drawn sheet glass in sizes other than those covered by this European
Standard.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendment
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 4: Gezogenes FlachglasVerre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 4: Verre étiréGlass in building - Basic soda lime silicate glass products - Part 2: Drawn sheet glass81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:FprEN 572-4kSIST FprEN 572-4:2012en,fr,de01-januar-2012kSIST FprEN 572-4:2012SLOVENSKI
STANDARD



kSIST FprEN 572-4:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 572-4
November 2011 ICS 81.040.20 Will supersede EN 572-4:2004English Version
Glass in building - Basic soda lime silicate glass products - Part 2: Drawn sheet glass
Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 4: Verre étiré
Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 4: Gezogenes Flachglas This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 572-4:2011: EkSIST FprEN 572-4:2012



FprEN 572-4:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Dimensional requirements .64.1 Thickness .64.1.1 General .64.1.2 Tolerances .64.2 Length, width and squareness .65 Quality requirements .75.1 General .75.2 Methods of observation and measurement .75.2.1 Optical faults of drawn sheet glass .75.2.2 Visual faults .75.3 Acceptance levels .86 Designation .9Bibliography . 10 kSIST FprEN 572-4:2012



FprEN 572-4:2011 (E) 3 Foreword This document (FprEN 572-4:2011) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 572-4:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following parts:  Part 1: Definitions and general physical and mechanical properties;  Part 2: Float glass;  Part 3: Polished wired glass;  Part 4: Drawn sheet glass;  Part 5: Patterned glass;  Part 6: Wired patterned glass;  Part 7: Wired or unwired channel shaped glass;  Part 8: Supplied and final cut sizes;  Part 9: Evaluation of conformity/Product standard.
kSIST FprEN 572-4:2012



FprEN 572-4:2011 (E) 4 1 Scope This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for drawn sheet glass, as defined in FpEN 572-1:2011, for use in building. This European Standard applies only to drawn sheet glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on drawn sheet glass in sizes other than those covered by this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. FprEN 572-1:2011, Glass in building — Basic soda lime silicate glass products — Part 1: Definitions and general physical and mechanical properties 3 Terms and definitions For the purposes of this document, the terms and definitions given in FprEN 572-1:2011 and the following apply. 3.1 new antique drawn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.