SIST EN 61347-2-8:2002

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

This part of EN 61347 specifies safety requirements for ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and characteristics as specified in EN 60081 and 60901. This first edition of EN 61347-2-8, together with EN 61347-1, cancels and replaces the first edition of EN 60920, published in 1990, and constitutes a minor revision. This standard shall be used in conjunction with EN 61347-1. It was established on the basis of the first edition (2000) of that standard.

Geräte für Lampen - Teil 2-8: Besondere Anforderungen an Vorschaltgeräte für Leuchtstofflampen

Appareillages de lampes - Partie 2-8: Prescriptions particulières pour les ballasts pour lampes fluorescentes

La présente partie de la EN 61347 traite des prescriptions de sécurité des ballasts autres que ceux du type à résistance, pour utilisation en courant alternatif jusqu'à 1 000 V, de fréquence égale à 50 Hz ou 60 Hz, associés à des lampes à fluorescence avec ou sans cathodes préchauffées fonctionnant avec ou sans starter ou dispositif d'amorçage et dont les puissances nominales, les dimensions et les caractéristiques sont indiquées dans la EN 60081 et la EN 60901. Cette première édition de la EN 61347-2-8, conjointement avec la EN 61347-1, annule et remplace la première édition de la EN 60920, parue en 1990, dont elle constitue une révision mineure. Cette norme doit être utilisée conjointement avec la EN 61347-1. Elle a été établie sur la base de la première édition (2000) de cette norme.

Regulatorji žarnic - 2-8. del: Posebne zahteve za dušilke fluorescenčnih sijalk (IEC 61347-2-8:2000)

General Information

• Status: Published In Translation
• Publication Date: 30-Nov-2002
• ICS: 29.130.01 - Switchgear and controlgear in general
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2002
• Due Date: 01-Dec-2002
• Completion Date: 01-Dec-2002
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 61347-2-8:2001 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

Relations

• Replaces: SIST EN 60920:1995 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 29-Jan-2023
• Amended By: SIST EN 61347-2-8:2002/A1:2006 - Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60920:1995/A11:2001 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60926:1996 - Auxiliaries for lamps - Starting devices (other than glow starters) - General and safety requirements
• Effective Date: 01-Nov-2003
• Replaces: SIST EN 60920:1995/A2:1996 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 29-Jan-2023
• Amended By: SIST EN 61347-2-8:2002/A1:2006 - Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps
• Effective Date: 01-Jun-2006
• Replaces: SIST EN 60920:1995 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 06-May-2014
• Replaces: SIST EN 60920:1995/A11:2001 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 06-May-2014
• Replaces: SIST EN 60920:1995/A2:1996 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 06-May-2014
• Replaces: SIST EN 60920:1995/A11:2001 - Ballasts for tubular fluorescent lamps - General and safety requirements
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61347-2-8:2002
01-december-2002
1DGRPHãþD
SIST EN 60920:1995
SIST EN 60920:1995/A11:2001
SIST EN 60920:1995/A2:1996
SIST EN 60926:1996
5HJXODWRUMLåDUQLFGHO3RVHEQH]DKWHYH]DGXãLONHIOXRUHVFHQþQLKVLMDON,(&

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
Geräte für Lampen - Teil 2-8: Besondere Anforderungen an Vorschaltgeräte für
Leuchtstofflampen
Appareillages de lampes - Partie 2-8: Prescriptions particulières pour les ballasts pour
lampes fluorescentes
Ta slovenski standard je istoveten z: EN 61347-2-8:2001
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 61347-2-8:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61347-2-8
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2001
ICS 29.140.99 Supersedes EN 60920:1991 + A1:1993 + A2:1996
English version
Lamp controlgear
Part 2-8: Particular requirements
for ballasts for fluorescent lamps
(IEC 61347-2-8:2000)
Appareillages de lampes Geräte für Lampen
Partie 2-8: Prescriptions particulières Teil 2-8: Besondere Anforderungen an
pour les ballasts pour lampes Vorschaltgeräte für Leuchtstofflampen
fluorescentes (IEC 61347-2-8:2000)
(CEI 61347-2-8:2000)
This European Standard was approved by CENELEC on 2000-11-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches
...