SIST EN 60317-0-6:2002/A1:2007

Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 0-6: Allgemeine Anforderungen - Runddrähte aus Kupfer, blank oder lackisoliert, mit Glasgewebe umsponnen und mit Harz oder Lack imprägniert

Spécifications pour types particuliers de fils de bobinage -- Partie 0-6: Prescriptions générales - Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre imprégnées de résine ou de vernis

Specifikacije za posebne vrste navijalnih žic - 0-6. del: Splošne zahteve - Bakrena žica z okroglim prerezom, gola ali emajlirana, ovita z optičnimi vlakni in impregnirana s smolo ali lakom (IEC 60317-0-6:2001/A1:2006)

General Information

• Status: Withdrawn
• Publication Date: 31-Jan-2007
• Withdrawal Date: 15-Aug-2023
• ICS: 29.060.10 - Wires
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 27-Jul-2023
• Due Date: 19-Aug-2023
• Completion Date: 16-Aug-2023
• Ref Project: EN 60317-0-6:2001/A1:2006 - Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

Relations

• Amends: SIST EN 60317-0-6:2002 - Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN IEC 60317-0-6:2020 - Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2020)
• Effective Date: 11-Aug-2020
• Amends: SIST EN 60317-0-6:2002 - Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
• Effective Date: 21-Sep-2010
• Amends: SIST EN 60317-0-6:2002 - Specifications for particular types of winding wires -- Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-0-6:2002/A1:2007
01-februar-2007
6SHFLILNDFLMH]DSRVHEQHYUVWHQDYLMDOQLKåLFGHO6SORãQH]DKWHYH%DNUHQD
åLFD]RNURJOLPSUHUH]RPJRODDOLHPDMOLUDQDRYLWD]RSWLþQLPLYODNQLLQ
LPSUHJQLUDQDVVPRORDOLODNRP,(&$
Specifications for particular types of winding wires -- Part 0-6: General requirements -
Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 0-6:
Allgemeine Anforderungen - Runddrähte aus Kupfer, blank oder lackisoliert, mit
Glasgewebe umsponnen und mit Harz oder Lack imprägniert
Spécifications pour types particuliers de fils de bobinage -- Partie 0-6: Prescriptions
générales - Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre
imprégnées de résine ou de vernis
Ta slovenski standard je istoveten z: EN 60317-0-6:2001/A1:2006
ICS:
29.060.10 Žice Wires
SIST EN 60317-0-6:2002/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-0-6:2002/A1:2007

---------------------- Page: 2 ----------------------

SIST EN 60317-0-6:2002/A1:2007


EUROPEAN STANDARD
EN 60317-0-6/A1

NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM

ICS 29.060.10


English version


Specifications for particular types of winding wires
Part 0-6: General requirements -
Glass-fibre wound resin or varnish impregnated,
bare or enamelled round copper wire
(IEC 60317-0-6:2001/A1:2006)


Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage für bestimmte Typen von Wickeldrähten
Partie 0-6: Prescriptions générales - Teil 0-6: Allgemeine Anforderungen -
Fil de section circulaire en cuivre nu Runddrähte aus Kupfer, blank oder
ou émaillé, guipé de fibres de verre lackisoliert, mit Glasgewebe umsponnen
imprégnées de résine ou de vernis und mit Harz oder Lack imprägniert
(CEI 60317-0-6:2001/A1:2006) (IEC 60317-0-6:2001/A1:2006)




This amendment A1 modifies the European Standard EN 60317-0-6:2001; it was approved by CENELEC on
2006-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-6:2001/A1:2006 E

---------------------- Page: 3 ----------------------

SIST EN 60317-0-6:2002/A1:2007
EN 60317-0-6:2001/A1:2006 - 2 -
Foreword
The text of document 55/992/CDV, future amendment 1 to IEC 60317-0-6:2001, prepared by IEC TC 55,
Winding wires, was submitted to the IEC-CENELEC Parallel Unique Acceptance Procedure and was
approved by CENELEC as amendment A1 to EN 60317-0-6:2001 on 2006-11-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 1:2006 to the International Standard IEC 60317-0-6:2001 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60317-0-6:2002/A1:2007
- 3 - EN 60317-0-6:2001/A1:2006
Replace Annex ZA of EN 60317-0-6:2001 by:
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60851
...