SIST EN 10292:2001

Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions

This European Standard specifies requirements for continuously hot-dip zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) and aluminium-silicon alloy (AS) coated flat products made of steels with higher yield strength for cold forming (see Tables 1 and 3) with thicknesses up to and including 3,0 mm unless otherwise agreed. The thickness is the final thickness of the delivered product after coating. This European Standard applies to strip of all widths and to sheets cut from it (>/- 600 mm width) and cut lengths (< 600 mm width).

Kontinuierlich schmelztauchveredeltes Band und Blech aus Stählen mit hoher Streckgrenze zum Kaltumformen - Technische Lieferbedingungen

Diese Europäische Norm enthält die Anforderungen an kontinuierlich schmelztauchveredelte Flacherzeugnisse mit Überzügen aus Zink (Z), Zink-Eisen Legierungen (ZF), Zink-Aluminium Legierungen (ZA), Aluminium-Zink Legierungen (AZ) und Aluminium-Silicum Legierungen (AS) aus Stählen mit hoher Streckgrenze zum Kaltumformen (siehe Tabellen 1 und 3) in Dicken

Bandes et tôles en aciers a haute limite d'élasticité revetues en continu par immersion a chaud pour formage a froid - Conditions techniques de livraison

La présente norme européenne a pour objet de définir les prescriptions relatives aux aciers a haute limite d'élasticité galvanisés a chaud en continu (Z), revetus d'alliage zinc-fer (ZF), zinc-aluminium (ZA) et aluminium-silicium (AS) pour formage a froid (voir tableau 1 et 3) dont l'épaisseur sauf accord contraire est /- 600 mm) et aux bandes refendues coupées en longueur (< 600 mm).

Jekleni trakovi in tanka pločevina s povečano napetostjo tečenja s površino, zaščiteno po postopkih vročega omakanja – Tehnični dobavni pogoji

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2001
• Withdrawal Date: 24-May-2007
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 24-May-2007
• Due Date: 16-Jun-2007
• Completion Date: 25-May-2007
• Ref Project: EN 10292:2000 - Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions

Relations

• Amended By: SIST EN 10292:2001/A1:2003 - Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions
• Effective Date: 22-Dec-2008
• Amended By: SIST EN 10292:2001/A2:2005 - Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN 10292:2007 - Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
• Effective Date: 01-Jun-2007

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10292:2001
01-november-2001
-HNOHQLWUDNRYLLQWDQNDSORþHYLQDVSRYHþDQRQDSHWRVWMRWHþHQMDVSRYUãLQR
]DãþLWHQRSRSRVWRSNLKYURþHJDRPDNDQMD±7HKQLþQLGREDYQLSRJRML
Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold
forming - Technical delivery conditions
Kontinuierlich schmelztauchveredeltes Band und Blech aus Stählen mit hoher
Streckgrenze zum Kaltumformen - Technische Lieferbedingungen
Bandes et
...