SIST EN 9300-007:2017
(Main)Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References
This document defines the common terms, abbreviations and references used through the EN 9300
series of standard parts.
Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten - Teil 007: Begriffe und Verweisungen
Série aérospatiale - LOTAR - Archivage long terme et récupération des données techniques produits numériques telles que CAD 3D et PDM - Partie 007 : Termes and réferences
Aeronavtika - LOTAR - Dolgotrajno arhiviranje in iskanje digitalne tehnične dokumentacije o izdelkih, kot so podatki o 3D, CAD in PDM - 007. del: Izrazi in reference
Ta dokument opredeljuje skupne izraze, okrajšave in sklice, ki se uporabljajo v skupini
standardov EN 9300.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 9300-007:2017
01-december-2017
$HURQDYWLND/27$5'ROJRWUDMQRDUKLYLUDQMHLQLVNDQMHGLJLWDOQHWHKQLþQH
GRNXPHQWDFLMHRL]GHONLKNRWVRSRGDWNLR'&$'LQ3'0GHO ,]UD]LLQ
UHIHUHQFH
Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data - Part 007: Terms and
References
Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und -Bereitstellung digitaler
technischer Produktdokumentationen, wie zum Beispiel von 3D-, CAD- und PDM-Daten -
Teil 007: Begriffe und Verweisungen
Série aérospatiale - LOTAR - Archivage long terme et récupération des données
techniques produits numériques telles que CAD 3D et PDM - Partie 007 : Termes and
réferences
Ta slovenski standard je istoveten z: EN 9300-007:2017
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9300-007:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 9300-007:2017
---------------------- Page: 2 ----------------------
SIST EN 9300-007:2017
EN 9300-007
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 35.240.30; 01.110; 35.240.60; 49.020
English Version
Aerospace series - LOTAR -LOng Term Archiving and
Retrieval of digital technical product documentation such
as 3D, CAD and PDM data - Part 007: Terms and
References
Série aérospatiale - LOTAR - Archivage long terme et Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung
récupération des données techniques produits und -Bereitstellung digitaler technischer
numériques telles que CAD 3D et PDM - Partie 007 : Produktdokumentationen, wie zum Beispiel von 3D-,
Termes and réferences CAD- und PDM-Daten - Teil 007: Begriffe und
Verweisungen
This European Standard was approved by CEN on 16 July 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9300-007:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
Contents
Page
European foreword . 3
Foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviations . 5
4 Part specific terms, definitions and abbreviations . 21
5 Applicability . 21
Bibliography . 22
2
---------------------- Page: 4 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
European foreword
This document (EN 9300-007:2017) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be
withdrawn at the latest by April 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
Foreword
This standard was prepared jointly by AIA, ASD-STAN, PDES Inc and the PROSTEP iViP Association.
The PROSTEP iViP Association is an international non-profit association in Europe. For establishing
leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from
leading industries, system vendors and research institutions. Its product and process data
standardization activities at European and worldwide levels are well known and accepted. The
PROSTEP iViP Association sees this standard and the related parts as a milestone of product data
technology.
PDES Inc is an international non-profit association in USA. The mission of PDES Inc is to accelerate the
development and implementation of ISO 10303, enabling enterprise integration and PLM
interoperability for member companies. PDES Inc gathers members from leading manufacturers,
national government agencies, PLM vendors and research organizations. PDES Inc. supports this
standard as an industry resource to sustain the interoperability of digital product information, ensuring
and maintaining authentic longevity throughout their product lifecycle.
Readers of this standard should note that all standards undergo periodic revisions and that any
reference made herein to any other standard implies its latest edition, unless otherwise stated.
The Standards will be published under two different standards organizations using different prefixes.
ASD-Stan will publish the standard under the number EN 9300–xxx. AIA will publish the standard
under the number NAS 9300–xxx. The content in the EN 9300 and NAS 9300 documents will be the
same. The differences will be noted in the reference documentation (i.e. for EN 9300 Geometric
Dimensioning & Tolerancing will be referenced in ISO 1101 and ISO 16792, and for NAS 9300 the same
information will be referenced in ASME Y14.5M and Y 14.41). The document formatting etc, will follow
that of the respective editorial rules of ASD-Stan and AIA.
4
---------------------- Page: 6 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
1 Scope
This document defines the common terms, abbreviations and references used through the EN 9300
series of standard parts.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 9300 (all parts), Aerospace series — LOTAR — LOng Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data
ISO 10303-1:1994, Industrial automation systems and integration — Product data representation and
exchange — Part 1: Overview and fundamental principles
ISO 10303-11:2003, Industrial automation systems and integration — Product data representation and
exchange — Part 11: Description methods: The EXPRESS language reference manual
ISO 14721:2003, Space data and information transfer systems — Open archival information system
(OAIS) — Reference model
3 Terms, definitions and abbreviations
For the purposes of this standard, the terms, definitions and abbreviations given in EN 9300-003 and
EN 9300-007 shall apply.
3.1 Terms
The following section provides a list of general terms that occur in the EN 9300 documentation,
together with a description of what the terms mean. As the meaning of a term may change with context,
this section records the usage of those terms in the context of EN 9300, and is provided to enable the
correct interpretation of the EN 9300 standard. These descriptions are not otherwise normative.
3.1.1
3D Model Based Definition
MBD
is a set of concepts, processes, and tools that allow the creation of an annotated 3D product definition
based on a 3D solid model; the MBD dataset includes all Engineering Intent requirements (including
Process Specifications, Geometric Dimensioning and Tolerancing (GD&T), Product and Manufacturing
Information (PMI) and other required information). Combined with product lifecycle management
(PLM) attributes, a parts list, and general notes, this constitutes an authoritative, single source of
master product definition data that does not include or depend upon traditional 2D drawings; the MBD
dataset defines complete requirements for a product in its nominal condition as well as permissible
limits of variation and other acceptance criteria, providing all the data needed to plan, fabricate, and
validate an article of product hardware
3.1.2
access
from the OAIS model, the process of recovering data from the archive
5
---------------------- Page: 7 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
3.1.3
Application Activity Model
AAM
from STEP, the model of activities that defines the context for a particular application protocol
3.1.4
Application Interpreted Model
AIM
one of the STEP information models, historically used as the basis for implementation
3.1.5
Application Protocol
AP
from STEP, one of the major parts of the standard that provides an implementable data exchange in a
particular context
3.1.6
Application Reference Model
ARM
from STEP, an information model that describes the information requirements and constraints of a
specific application context
3.1.7
archival storage
from the OAIS model, the process that ensures data remains available for access
3.1.8
archive
<1> repository for historical information
3.1.9
archive
<2> any repository conforming to the OAIS standard
Note 1 to entry: This is the preferred sense in the LOTAR documentation.
3.1.10
article
see product, part, item and article
3.1.11
authentication
<1> ensuring something is what it purports to be
3.1.12
authentication
<2> in security, ensuring the claims to identity of one party are proven to the satisfaction of another
3.1.13
audit trail
information collected during the execution of a process that shows what actually occurred
6
---------------------- Page: 8 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
3.1.14
certification
<1> the process of assessing a process or product against some particular set of criteria
3.1.15
certification
<2> the particular process of certifying an aircraft type as being airworthy
Note 1 to entry: For clarity, LOTAR uses the term “Type Certification” in this context.
3.1.16
business application
software creating and generating native Product Models
[SOURCE: see EN 9300-003, 3.2.3]
3.1.17
configuration management
<1> discipline of managing the information relating to a product design, encompassing change
management, configuration identification, status accounting and audit
Note 1 to entry: This is the preferred sense in the aircraft industry, and in the EN 9300 documentation.
3.1.18
configuration management
<2> rules relating to the choice and combinations of options used when configuring a particular
physical example of a product
3.1.19
consumer
from OAIS, the user of data taken from an archive (see also designated community)
3.1.20
cyclic redundancy check
method for checking the integrity of a set of digital data
3.1.21
data object
collection of data treated as a single unit, such as a CAD model or file
3.1.22
dated or undated reference
reference to a version controlled document. In a dated reference, the particular version is identified by
its date of issue. In an undated reference, the particular version is the latest released version
3.1.23
description method
(usually formal) method of describing information and its structure
3.1.24
designated community
from OAIS, the community for which the system is designed. In the case of EN 9300, it is the community
that will use the information retained in an archive
7
---------------------- Page: 9 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
3.1.25
digital signature
see electronic signature
3.1.26
disaster recovery
recovery of the archive in the event of major failure or destruction of the archive
3.1.27
document
this term covers a family of usages, from a physical paper document, through electronic files which can
be thought as representing a document, to synthetic view derived from multiple sources for which the
user's conceptual model is that of reading a document; see also EN 9300-003, 5.3.1 “Archiving Product
Models vs. Archiving Documents”
3.1.28
domain specific part
LOTAR parts are either general or domain specific. LOTAR parts 100 upwards are the domain specific
parts, and deal with the particularities of each type of data such as 3D CAD; the general parts (1 to 99)
apply to all types of data
3.1.29
electronic signature
defined method to sign an object in electronic environments; it provides means to authenticate the
signatory and the signed object in an unambiguous and safe way by attaching to or logically associating
data in electronic form to other electronic objects (See EN 9300-005)
3.1.30
essential information
information that must be preserved, as relating to the key characteristics (qv) of some aircraft
component
3.1.31
evidential weight
from Code of Practice (CoP) for Legal Admissibility, in the case where electronic information is used as
evidence in a court case, the degree of reliance that the information is what it purports to be
3.1.32
explicit
(as in explicit geometry)
where each geometric element is defined in terms of the space it exists in, e.g. a line is defined by its end
points; in parametric geometry, the elements are defined through a construction procedure, so that if
the parameters change, the element itself changes — e.g. a line is defined as being the normal to a face
from its centre
Note 1 to entry: an explicit geometric element may be constructed manually by some procedure, but
subsequent changes to the starting entities of the procedure do not change the element
3.1.33
EXPRESS
from STEP, a formal data modelling language, defined in ISO 10303-11
8
---------------------- Page: 10 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
3.1.34
EXPRESS-G
from STEP, a diagrammatic form of EXPRESS
3.1.35
Extensible Mark-up Language
XML
a mark-up language, used to identify fields within a file that can be processed by a web Browser; STEP
provides an XML binding for AP's
3.1.36
file
named collection of data managed as a single unit at the level of a computer operating system
3.1.37
first article inspection
organization's system shall provide a process for the inspection, verification, and documentation of a
representative item from the first production run of a new part, or following any subsequent change
that invalidates the previous first article inspection result (source boeing)
3.1.38
fixity information
ancillary information that show a particular set of information is unchanged
3.1.39
Geometric Dimensioning and Tolerancing
GD&T
definition of the physical dimensions of a component and the allowable variation on those dimensions
3.1.40
Hyper Text Mark-up Language
HTML
mark-up language, used to indicate display parameters within a file that can be processed by a Web
Browser
3.1.41
IDEF0
modelling methodology for describing activities and the relations between them
3.1.42
ingest
from the OAIS model, the process of transferring data to the archive
3.1.43
item
see product, part, item and article
3.1.44
Joint Aviation Requirements
JAR
prefix for standards and related documents produced by the Joint Aviation Authorities
9
---------------------- Page: 11 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
3.1.45
legal admissibility
from CoP for legal admissibility, the rules under which information can be used in support of a legal
case
3.1.46
long term
long enough for information to be affected by changing technologies, including support for new media
and data formats, or a changed user community
3.1.47
LOTAR
<1> generic name for this standard
3.1.48
LOTAR
<2> name of the project / project team that generated this standard
3.1.49
LOTAR@AEROSPACE
name of the project / project team concerned with the harmonization of EN 9300 with the AIA standard
AS 9034
3.1.50
manufacturer
company that makes physical products, although this term is also used to refer to companies that create
designs, usually on behalf of the manufacturer; this is more properly called the manufacturing definition
supply chain
3.1.51
media
physical material on which data is recorded, such as an optical disc
3.1.52
metadata
<1> data about data. For example, the file name is meta data about a CAD design held as a file
3.1.53
metadata
<2> the data required for the management and use of information packages
Note 1 to entry: This is the preferred sense in the EN 9300 documentation.
3.1.54
native format
format in which a software application stores its data, where that format is part of the design of the
software
3.1.55
OAIS model
Open Archival Information System reference model (see normative references)
10
---------------------- Page: 12 ----------------------
SIST EN 9300-007:2017
EN 9300-007:2017 (E)
3.1.56
original product model
model used to keep the design intent for longterm archiving in the context of certification & legal
requirements for proof
3.1.57
part
see product, part, item and article
3.1.58
part 21
from STEP, one of the ways of implementing STEP, being the default ASCII file encoding
3.1.59
PDM schema
STEP schema for Product Data Management data
3.1.60
preservation planning
from the OAIS model, the services and functions for monitoring the environment of the OAIS and
providing recommendations to ensure that the information stored in the OAIS remains accessible to the
Designated User Community over the long term, even if the original computing environment becomes
obsolete
3.1.61
presentation (of data)
transformation of data into a form readable or viewable by a human (see also Representation). For
example, a point may be displayed as a dot on a computer screen (cf Representation)
3.1.62
privacy
rights relating to the collection, recording, and access to data concerning a particular identifiable
individual
3.1.63
platform
particular hardware used in the creation, recording and viewing of electronic data
3.1.64
producer
from OAIS, the creator of information to be archived
3.1.65
product, part, item and article
in general aerospace usage during the design phase, part, item and article are treated as synonyms
referring to unitary parts or simple assemblies that are treated as a single unit, such as composite
material part or an electrical connector; the term Product tends to be used to refer to something that is
complex and deliverable, such as an aeroplane; in ISO 10303, product is the general class of any
deliverable, from individual components upwards, and allows for the fact that even a simple bolt is the
product of a bolt manufacturer; ISO 10303-239 (PLCS) uses Part as a subtype of Product to identify the
design of a physically realisable compone
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.