SIST EN 61326-1:2013
(Main)Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2012)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC 61326-1:2012)
This part of IEC 61326 specifies requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply or battery of less than 1000 V a.c. or 1500 V d.c. or from the circuit being measured. Equipment intended for professional, industrial-process, industrial-manufacturing and educational use is covered by this part. It includes equipment and computing devices for - measurement and test; - control; - laboratory use; - accessories intended for use with the above (such as sample handling equipment), intended to be used in industrial and non-industrial locations. Computing devices and assemblies and similar equipment within the scope of Information Technology Equipment (ITE) and complying with applicable ITE EMC standards may be used in systems within the scope of this part of IEC 61326 without additional testing, if they are suitable for the intended electromagnetic environment. It is generally considered that this standard takes precedence over the corresponding generic EMC standards. The following equipment is covered by this standard. a) Electrical measurement and test equipment This is equipment which, by electrical means, measures, indicates or records one or more electrical or non-electrical quantities, also non-measuring equipment such as signal generators, measurement standards, power supplies and transducers. b) Electrical control equipment This is equipment which controls one or more output quantities to specific values, with each value determined by manual settings, by local or remote programming, or by one or more input variables. This includes Industrial Process Measurement and Control (IPMC) equipment, which consists of devices such as: - process controllers and regulators; - programmable controllers; - power supply units for equipment and systems (centralized or dedicated); - analogue/digital indicators and recorders; - process instrumentation; - transducers, positioners, intelligent actuators, etc. c) Electrical laboratory equipment This is equipment which measures, indicates monitors or analyses substances, or is used to prepare materials, and includes In Vitro Diagnostic (IVD) equipment. This equipment may also be used in areas other than laboratories, for example self-test IVD equipment may be used in the home. Equipment within the scope of this standard might be operated in different electromagnetic environments; depending on the electromagnetic environment different emission and immunity test requirements are applicable. This standard considers three types of electromagnetic environments: - basic electromagnetic environment; - industrial electromagnetic environment; - controlled electromagnetic environment. Corresponding immunity test requirements are described in Clause 6. In terms of emission requirements, equipment shall be classified in Class A or Class B equipment, as per the requirements and procedure of CISPR 11. The corresponding emission requirements are described in Clause 7.
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen – Teil 1: Allgemeine Anforderungen (IEC 61326-1:2012)
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 1: Exigences générales (CEI 61326-1:2012)
NEW! La CEI 61326-1:2012 est disponible sous forme de IEC Standards+ 61326-1:2012 qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. La CEI 61326-1:2012 énonce les exigences relatives à l'immunité et aux émissions concernant la compatibilité électromagnétique (CEM) pour les matériels électriques fonctionnant à partir d'une source d'alimentation ou d'une batterie inférieure à 1 000 V en courant alternatif ou 1 500 V en courant continu ou à partir du circuit mesuré. Elle concerne les équipements prévus pour un usage professionnel, pour les processus industriels et pour l'enseignement. Cette deuxième édition annule et remplace la première édition parue en 2005. Elle constitue une révision technique. Les modifications techniques significatives par rapport à l'édition antérieure sont: - les niveaux d'essai d'immunité et les critères de performance ont été revus; - les exigences concernant le matériel d'essai et de mesure portatif ont été clarifiées et modifiées; - la description des environnements électromagnétiques a été améliorée.
Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 1. del: Splošne zahteve (IEC 61326-1:2012)
Ta del standarda IEC 61326 določa zahteve glede odpornosti in sevanja v zvezi z elektromagnetno združljivostjo (EMC) za električno opremo, ki se napaja z električnim napajanjem ali baterijo z manj kot 1000 V izmenične napetosti ali 1500 V enosmerne napetosti ali z merjenim tokokrogom. Ta del zajema opremo, namenjeno profesionalni uporabi in uporabi v industrijskih procesih, industrijski proizvodnji ter v izobraževalne namene. Vključuje opremo in računske naprave za: – merjenje in preskuse; – kontrolo; – laboratorijsko uporabo; – dodatke, namenjene uporabi z navedeno opremo in napravami (kot je oprema za ravnanje z vzorci), ki so namenjene uporabi na industrijskih in neindustrijskih lokacijah. Računske naprave in sestavi ter podobna oprema v okviru opreme za informacijsko tehnologijo (ITE), ki so v skladu z veljavnimi standardi za elektromagnetno združljivost ITE, se lahko v sistemih s področja uporabe tega dela standarda IEC 61326 uporabijo brez dodatnih preskusov, če so primerni za načrtovano elektromagnetno okolje. Na splošno velja, da ima ta standard prednost pred ustreznimi splošnimi standardi za elektromagnetno združljivost. Ta standard zajema naslednjo opremo: a) električno opremo za merjenje in preskuse, tj. oprema, ki z uporabo elektrike meri, navaja ali beleži eno ali več električnih ali neelektričnih veličin, pa tudi nemerilna oprema, kot so generatorji signalov, merilni standardi, električno napajanje in pretvorniki; b) električno opremo za kontrolo, tj. oprema, ki nadzoruje eno ali več izhodnih veličin do posebnih vrednosti, pri čemer se vsaka vrednost določi z ročnimi nastavitvami, lokalnim ali daljinskim programiranjem ali z eno ali več vhodnimi spremenljivkami. Sem spada oprema za merjenje in kontrolo v industrijskih procesih (IPMC), ki jo sestavljajo naprave, kot so: – procesni krmilniki in regulatorji; – programirljivi krmilniki, – napajalne enote za opremo in sisteme (centralizirane ali namenske); – analogni/digitalni indikatorji in snemalniki; – procesni instrumenti; – pretvorniki, pozicionerji, inteligentni aktivatorji itd.; c) električna laboratorijska oprema, tj. oprema, ki meri, navaja, spremlja ali analizira snovi ali se uporablja za pripravo materialov in zajema diagnostično opremo in vitro (IVD). Ta oprema se lahko uporablja tudi zunaj bolnišnic; oprema IVD za samopreskušanje se na primer lahko uporablja doma. Oprema s področja uporabe tega standarda se morda lahko uporablja v različnih elektromagnetnih okoljih; glede na elektromagnetno okolje se uporabljajo različne zahteve glede sevanja in preskusa odpornosti. Ta standard obravnava tri vrste elektromagnetnih okolij: – osnovno elektromagnetno okolje, – industrijsko elektromagnetno okolje; – nadzorovano elektromagnetno okolje. Ustrezne zahteve glede preskusa odpornosti so opisane v točki 6. Kar zadeva zahteve glede sevanja, se oprema razvrsti v razred A ali razred B v skladu z zahtevami in postopkom iz standarda CISPR 11. Ustrezne zahteve glede sevanja so opisane v točki 7.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61326-1:2013
01-marec-2013
1DGRPHãþD
SIST EN 61326-1:2007
(OHNWULþQDRSUHPD]DPHUMHQMHNRQWURORLQODERUDWRULMVNRXSRUDER=DKWHYH]D
HOHNWURPDJQHWQR]GUXåOMLYRVW (0& GHO 6SORãQH]DKWHYH ,(&
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements (IEC 61326-1:2012)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen – Teil 1:
Allgemeine Anforderungen (IEC 61326-1:2012)
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 1: Exigences générales (CEI 61326-1:2012)
Ta slovenski standard je istoveten z: EN 61326-1:2013
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 61326-1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61326-1:2013
---------------------- Page: 2 ----------------------
SIST EN 61326-1:2013
EUROPEAN STANDARD
EN 61326-1
NORME EUROPÉENNE
January 2013
EUROPÄISCHE NORM
ICS 17.220; 19.080; 25.040.40; 33.100 Supersedes EN 61326-1:2006
English version
Electrical equipment for measurement, control and laboratory use -
EMC requirements -
Part 1: General requirements
(IEC 61326-1:2012)
Matériel électrique de mesure, de Elektrische Mess-, Steuer-, Regel- und
commande et de laboratoire - Laborgeräte -
Exigences relatives à la CEM - EMV-Anforderungen -
Partie 1: Exigences générales Teil 1: Allgemeine Anforderungen
(CEI 61326-1:2012) (IEC 61326-1:2012)
This European Standard was approved by CENELEC on 2012-08-14. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-1:2013 E
---------------------- Page: 3 ----------------------
SIST EN 61326-1:2013
EN 61326-1:2013 - 2 -
Foreword
The text of document 65A/628/FDIS, future edition 2 of IEC 61326-1, prepared by SC 65A, "System
aspects", of IEC TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61326-1:2013.
The following dates are fixed:
• latest date by which the document has (dop) 2013-07-11
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-08-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61326-1:2006.
EN 61326-1:2013 includes the following significant technical changes with respect to EN 61326-1:2006:
– the immunity test levels and performance criteria have been reviewed;
– requirements for portable test and measurement equipment have been clarified and amended;
– the description of the electromagnetic environments has been improved.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.