SIST EN IEC 61326-1:2021/oprAA:2023
(Amendment)Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
This part of EN 61326 is a product family standard specifying requirements for immunity and emissions regarding electromagnetic compatibility (EMC) for electrical equipment, operating from a supply or battery of less than 1 000 V AC or 1 500 V DC or from the circuit being measured. Equipment intended for professional, industrial-process, industrial-manufacturing and educational use is covered by this part. It includes equipment and computing devices for
- measurement and test;
- control;
- LABORATORY use;
- accessories intended for use with the above (such as sample handling equipment), intended to be used in industrial and non-industrial locations.
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 1: Allgemeine Anforderungen
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 1: Exigences générales
Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61326-1:2021/oprAA:2023
01-december-2023
Električna oprema za merjenje, nadzor in laboratorijsko uporabo - Zahteve za
elektromagnetno združljivost (EMC) - 1. del: Splošne zahteve
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements
Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-Anforderungen - Teil 1:
Allgemeine Anforderungen
Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la
CEM - Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN IEC 61326-1:2021/prAA:2023
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN IEC 61326-1:2021/oprAA:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61326-1:2021/oprAA:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61326-1:2021/oprAA:2023
EUROPEAN STANDARD DRAFT
EN IEC 61326-1:2021
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2023
ICS 25.040.40; 17.220.20; 33.100.20 -
English Version
Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 1: General requirements
Matériel électrique de mesure, de commande et de Elektrische Mess-, Steuer-, Regel- und Laborgeräte - EMV-
laboratoire - Exigences relatives à la CEM - Partie 1: Anforderungen - Teil 1: Allgemeine Anforderungen
Exigences générales
This draft amendment prAA, if approved, will modify the European Standard EN IEC 61326-1:2021; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2024-01-12.
It has been drawn up by CLC/TC 65X.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 75662 Ref. No. EN IEC 61326-1:2021/prAA:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61326-1:2021/oprAA:2023
EN IEC 61326-1:2021/prAA:2023 (E)
9 Contents Page
10 European foreword . 3
11 1 Modifications to Introduction . 5
12 2 Modifications to Clause 1, “Scope” . 5
13 3 Modifications to Clause 4, “General” . 5
14 4 Modifications to Clause 5, “EMC test plan” . 5
15 5 Modifications to Clause 6, “Immunity requirements” . 5
16 6 Modifications to Clause 7, “Emission requirements” .11
17 7 Modifications to Clause 9, “Instruction for use” .12
18 8 Modifications to Annex A ” Immunity test requirements for PORTABLE TEST AND MEASUREMENT
19 EQUIPMENT powered by battery or from
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.