Methods of test for screed materials - Part 8: Determination of bond strength

This European Standard specifies a method for determining the bond strength between a screed and a standard substrate and specifies a method for determining the tensile strength at the surface of specimens made from cementitious screed-, calcium sulfate, screed-, magnesia screed- and synthetic resin screed material. The method is also suitable for floor screeds for determining the tensile strength at the surface of the floor screed or for determining the bond strength between a bonded floor screed and a base.

Prüfverfahren für Estrichmörtel und Estrichmassen - Teil 8: Bestimmung der Haftzugfestigkeit

Méthodes d'essai des matériaux pour chapes - Partie 8: Détermination de la force d'adhérence

La présente Norme européenne spécifie une méthode de détermination de la force d'adhérence entre une chape et un support normalisé pour des éprouvettes réalisées en matériau pour chapes a base de résine synthétique, de magnésie, de sulfate de calcium et de ciment.

Metode preskušanja za mešanice za estrih – 8. del: Določevanje sprijemne trdnosti

General Information

Status
Published
Publication Date
31-Aug-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2003
Due Date
01-Sep-2003
Completion Date
01-Sep-2003

Buy Standard

Standard
EN 13892-8:2003
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Methods of test for screed materials - Part 8: Determination of bond strengthMéthodes d'essai des matériaux pour chapes - Partie 8: Détermination de la force d'adhérencePrüfverfahren für Estrichmörtel und Estrichmassen - Teil 8: Bestimmung der Haftzugfestigkeit91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:SIST EN 13892-8:2003enTa slovenski standard je istoveten z:EN 13892-8:200201-september-2003SIST EN 13892-8:2003SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-8November 2002ICS 91.100.10English versionMethods of test for screed materials - Part 8: Determination ofbond strengthMéthodes d'essais des matériaux pour chapes - Partie 8:Détermination de la force d'adhérencePrüfverfahren für Estrichmörtel und Estrichmassen - Teil 8:Bestimmung der HaftzugfestigkeitThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-8:2002 E



EN 13892-8:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Symbols and abbreviations.45Apparatus and material.46Procedure.57Expression of results.68Test Report.6



EN 13892-8:2002 (E)3ForewordThis document (EN 13892-8:2002) has been prepared by Technical Committee CEN/TC 303, "Floor screeds andin-situ floorings in buildings", the secretariat of which is held by DIN.It was prepared by Working Group 2 “Screed materials and floor screeds – Test methods” taking into account theproposals submitted by Working Group 1 “Screed materials and floor screeds – Definitions, properties andrequirements”.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest byMay 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.



EN 13892-8:2002 (E)41 Scope· This European Standard specifies a method for determining the bond strength between a screed and a standardsubstrate for specimens made from cementitious screed-, calcium sulphate screed-, magnesite screed- andsynthetic resin screed material.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 1766:2000, Products and systems for the protection and repair of concrete structures - Test methods -Reference concretes for testing.EN 13813, Screed material and floor screeds - Screed material - Properties and requirements.EN 13892-1, Test methods for screed materials – Part 1: Sampling, making and curing specimens for test.EN 24624:1992, Paints and varnishes — Pull-off test (ISO 4624:1978).3 PrincipleThe bond strength is determined as the failure tensile stress applied by a direct load perpendicular to the bondarea. The bond strength is calculated as the quotient between the failure load and the test area. The test area isdefined by coring or cutting through the screed into the substrate.4 Symbols and abb
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.