SIST EN 16228-4:2014/kprA1:2021
(Amendment)Drilling and foundation equipment - Safety - Part 4: Foundation equipment
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
This European Standard, together with part 1, deals with all significant hazards for foundation equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014
This document does not repeat the requirements from EN 16228 1:2014 but adds or replaces the requirements for application for foundation equipment.
In this document the general term "foundation equipment" covers several different types of machines used for installation and/or extracting by drilling (machines with a rotary torque greater than 35 kNm), driving, vibrating, pushing, pulling or a combination of techniques, or any other way, of:
- longitudinal foundation elements;
- soil improvement by vibrating and soil mixing techniques;
- vertical drainage.
NOTE Some foundation equipment may have an additional rotary head with a torque less than 35 kNm for pre-drilling applications; this equipment is covered by this standard.
Machines with one or more of the following characteristics are not covered by this standard, but are covered by EN 16228 2:
- machines that have a main rotary head torque of less than 35 kNm;
- machines that have multi-directional drilling capability;
- machines for which adding and removing rods or digging and drilling tools etc. is usually required during the installation/extraction process.
Typically the process of foundation techniques involves the installation of longitudinal elements such as concrete piles, steel beams, tubes and sheet piles, injection elements as tubes and hoses and casings for cast in situ.
Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 4: Geräte für Gründungsarbeiten
Machines de forage et de fondation - Sécurité - Partie 4 : Machines de fondation
Dans le 9e alinéa, deuxième tiret, remplacer par
« - Partie 2 : Machines mobiles de forage de génie civil, de puits d'eau, d'exploration de sol, d'énergie géothermique dans le sol ou mélange roche et sol ».
Oprema za vrtanje in temeljenje - Varnost - 4. del: Oprema za temeljenje - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16228-4:2014/oprA1:2019
01-julij-2019
Oprema za vrtanje in temeljenje - Varnost - 4. del: Oprema za temeljenje -
Dopolnilo A1
Drilling and foundation equipment - Safety - Part 4: Foundation equipment
Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 4: Geräte für
Gründungsarbeiten
Machines de forage et de fondation - Sécurité - Partie 4 : Machines de fondation
Ta slovenski standard je istoveten z: EN 16228-4:2014/prA1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN 16228-4:2014/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 16228-4:2014/oprA1:2019
SIST EN 16228-4:2014/oprA1:2019
DRAFT
EUROPEAN STANDARD
EN 16228-4:2014
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2019
ICS 93.020
English Version
Drilling and foundation equipment - Safety - Part 4:
Foundation equipment
Machines de forage et de fondation - Sécurité - Partie 4 Geräte für Bohr- und Gründungsarbeiten - Sicherheit -
: Machines de fondation Teil 4: Geräte für Gründungsarbeiten
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 16228-4:2014. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16228-4:2014/prA1:2019 E
worldwide for CEN national Members.
SIST EN 16228-4:2014/oprA1:2019
EN 16228-4:2014/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to the whole text . 4
2 Modification to Clause 2 "Addition of Normative Reference" . 4
3 Modification to Clause 4 "List of additional significant hazards" . 4
4 Modification to Subclause 5.2 "Rigid body stability" . 4
5 Addition of a new Subclause 5.4 " Operating positions " . 5
6 Modification to Subclause 5.5 "Moving parts involved in the process" . 5
7 Addition of a new Subclause 5.7 "Auxiliary equipment for piling rig" . 6
8 Modification of Clause 6 "Verification of the safety requirements and/or protective
measures" . 6
9 Modification to Clause 7 "Information for use – operator's manual". 6
10 Modification to Subclause A.3 "Rotary piling rig" . 6
SIST EN 16228-4:2014/oprA1:2019
EN 16228-4:2014/prA1:2019 (E)
European foreword
This document (EN 16228-4:2014/prA1:2019) has been prepared by Technical Committee CEN/TC 2014
“Construction equipment and building material machines - Safety”, the secretariat of which is held by
DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of EN 16228‑
4:2014.
SIST EN 16228-4:2014/oprA1:2019
EN 16228-4:2014/prA1:2019 (E)
1 Modification to the whole text
In the entire document, for all instances found:
Replace "EN 16228-1:2014"
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.