SIST EN 1542:2000
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method for measuring the tensile bond strength of grouts, mortars, concretes and surface protection systems (SPS) used for the protection and repair of concrete. The provisions of the standard are applicable to products and systems applied to a maximum thickness of 50 mm.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Messung der Haftfestigkeit im Abreißversuch
Diese Europäische Norm ist Teil einer Reihe von Normen für Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken. Sie enthält Festlegungen für ein Verfahren zur Bestimmung der Haftzug-festigkeit von Vergußmörteln, Reparaturmörteln, Betonen und Oberflächenschutzsystemen (SPS). Die Bestimmungen dieser Norm gelten für Produkte und Systeme, die bis zu einer maximalen Schichtdicke von 50 mm ange-wandt werden.
Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essais - Mesurage de l'adhérence par traction directe
La présente norme fait partie d'une série traitant des produits et systèmes pour la protection et la réparation des structures en béton. Elle établit une méthode de mesure de l'adhérence par traction directe des ciments, mortiers, bétons et des systèmes de protection des surfaces (SPS) utilisés pour la protection et la réparation du béton. La présente norme s'applique aux produits et systèmes appliqués sur une épaisseur maximale de 50 mm.
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Merjenje odtržne trdnosti
General Information
- Status
- Published
- Publication Date
- 30-Apr-2000
- Technical Committee
- BBB - Concrete, reinforced concrete and prestressed concrete
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-May-2000
- Due Date
- 01-May-2000
- Completion Date
- 01-May-2000
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 1542:2000 is a European Standard developed by CEN that defines a standardized test method for assessing the tensile bond strength of products and systems used in the protection and repair of concrete structures. Specifically, this standard details the procedures for performing the pull-off test, providing a reliable means of measuring the bond strength of grouts, mortars, concretes, and surface protection systems (SPS) applied to concrete substrates. The methodology outlined in SIST EN 1542:2000 is applicable to repair and protection products and systems applied at thicknesses up to 50 mm.
Key Topics
- Bond Strength Evaluation: SIST EN 1542:2000 specifies how to measure the tensile bond strength between applied materials (such as repair mortars or protective coatings) and the concrete substrate.
- Pull-Off Test Method: The standard describes the preparation, testing, and evaluation procedures for conducting the pull-off test, a crucial method for quality assurance in concrete repair and protection.
- Applicability: The test method is intended for grouts, mortars, concretes, and surface protection systems used on concrete structures, both in repair and new construction scenarios.
- Quality Assurance: Using this standard helps ensure that repair and protection systems are correctly bonded to the concrete surface, helping maintain structural integrity and durability.
Applications
SIST EN 1542:2000 is widely used by professionals in civil engineering, construction, and materials testing fields to:
- Assess Product Performance: Evaluate whether a repair or protection system achieves the required bond strength to the host concrete substrate.
- Quality Control: Serve as a tool for contractors, material suppliers, and third-party laboratories to verify the performance of concrete repair systems on-site or in the laboratory.
- Specification Compliance: Ensure that products and systems used in the repair and protection of concrete meet specified standards for bond strength, reducing the risk of premature failure.
- Research and Development: Provide a standardized method for testing and comparing new materials and technologies designed for concrete repair and surface protection.
Common scenarios where SIST EN 1542:2000 is applied include bridge deck overlays, façade repairs, concrete flooring upgrades, and the evaluation of coatings or waterproofing membranes.
Related Standards
For comprehensive quality assurance and compatibility in concrete protection and repair projects, SIST EN 1542:2000 is used alongside several other European and international standards, including:
- EN 1504 series: Products and systems for the protection and repair of concrete structures – a suite of standards covering all aspects of concrete repair materials and methods.
- EN 1015 series: Test methods for mortars, with relevance for repair mortars and coatings.
- EN 13813: Screed materials and floor screeds – test methods and requirements.
- ISO 4624: Paints and varnishes – Pull-off test for adhesion, relevant for surface protection systems.
- EN 13578: Durability of bonded systems for concrete repair.
Adhering to SIST EN 1542:2000 supports regulatory compliance, enhances safety, and ensures the longevity of both new and existing concrete structures by verifying the critical bond between substrates and repair systems. For anyone involved in concrete maintenance or restoration, understanding and applying SIST EN 1542:2000 is essential for best practices and optimal performance outcomes.
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 1542:2000 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off". This standard covers: This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method for measuring the tensile bond strength of grouts, mortars, concretes and surface protection systems (SPS) used for the protection and repair of concrete. The provisions of the standard are applicable to products and systems applied to a maximum thickness of 50 mm.
This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method for measuring the tensile bond strength of grouts, mortars, concretes and surface protection systems (SPS) used for the protection and repair of concrete. The provisions of the standard are applicable to products and systems applied to a maximum thickness of 50 mm.
SIST EN 1542:2000 is classified under the following ICS (International Classification for Standards) categories: 91.080.40 - Concrete structures. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1542:2000 has the following relationships with other standards: It is inter standard links to SIST EN 1504-7:2006, SIST EN 1504-1:2005, SIST EN 1504-8:2016, SIST EN 1504-10:2017, SIST EN 1504-9:2008, SIST EN ISO 4624:2023, SIST EN 1766:2017, SIST EN 1504-6:2006, SIST EN 915:1996, SIST EN 196-1:2016, SIST EN 1504-4:2005, SIST EN 1504-5:2013, SIST EN 1504-2:2004, SIST EN 1766:2002, SIST EN 12188:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1542:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/128. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1542:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Messung der Haftfestigkeit im AbreißversuchProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essais - Mesurage de l'adhérence par traction directeProducts and systems for the protection and repair of concrete stru
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...