iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 860:2000

(Main)

Safety of woodworking machines - One side thickness planing machines

Safety of woodworking machines - One side thickness planing machines

This European standard specifies the requirements and/or measures to remove the hazards and limit the risk on one side thickness planing machines fitted with an integrated feed hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where they are covered with plastic laminate or edgings.  Electrically driven machines excluded form the scope of this standard are covered by the requirements of EN 61029-1: 1995 or EN 50144-1: 1995 and prEN 61029-2-3: 1996.  This European standard covers all the hazards relevant to this machine. These hazards are listed in clause 4.  This European Standard does not apply to machines set up on a bench or  a table similar to a bench which are intended to carry out work in a stationary position and capable of being lifted by by hand by one person.  This European standard applies to one side thicknessing machines with manual loading and unloading and with cutterblock fixed in position as defined in 3.1.1.  This European standard does not apply to hand held woodworking machines or any adaptation permitting their use in a different mode, i.e. bench mounting. It does not apply to thickness planing machines where the cutterblock is adjustable for depth of cut setting.  This European standard is primarily applicable to machines which are manufactured after the date of issue of this standard.

Sicherheit von Holzbearbeitungsmaschinen - Dickenhobelmaschinen für einseitige Bearbeitung

Diese europäische Norm beschreibt die Anforderungen und/oder Verfahren für die Beseitigung von Gefährdung und zur Begrenzung der Risiken an Dickenhobel- maschinen für einseitige Bearbeitung - nachfolgend als "Maschinen" bezeichnet -, die bestimmt sind zum Hobeln von Massivholz, Spanplatten, Faserplatten, Sperr-holz sowie diesen Werkstoffen, wenn sie kunststoffbeschichtet oder mit Kunstst- offkanten versehen sind.

Sécurité des machines pour le travail du bois - Machines a raboter sur une face

La présente norme européenne spécifie les exigences et/ou les mesures qui doivent etre prises pour éliminer les phénomenes dangereux et limiter les risques sur les raboteuses sur une face équipée d'une alimentation intégrée ( désignées ci-apres sous le terme machines) conçues pour usiner du bois, des panneaux de fibres ou de particules, de contre-plaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de plastique.

Safety of woodworking machines - One side thickness planing machines

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
13-Jan-2009
ICS
25.080.25 - Planing machines
79.120.10 - Woodworking machines
Technical Committee
VSN - Safety of machinery
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Jan-2009
Due Date
01-Feb-2009
Completion Date
14-Jan-2009
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN 860:1997 - Safety of woodworking machines - One side thickness planing machines

Relations

Replaced By
SIST EN 860:2009 - Safety of woodworking machines - One side thickness planing machines
Effective Date
01-Feb-2009

Buy Standard

EN 860:2000EN 860:2000
PreviousNext
Standard
EN 860:2000
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 860:2000
01-april-2000
Safety of woodworking machines - One side thickness planing machines
Safety of woodworking machines - One side thickness planing machines
Sicherheit von Holzbearbeitungsmaschinen - Dickenhobelmaschinen für einseitige
Bearbeitung
Sécurité des machines pour le travail du bois - Machines a raboter sur une face
Ta slovenski standard je istoveten z: EN 860:1997
ICS:
25.080.25 6WURML]DSORãþLQVNRREGHODYR Planing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 860:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 860:2000

---------------------- Page: 2 ----------------------

SIST EN 860:2000

---------------------- Page: 3 ----------------------

SIST EN 860:2000

---------------------- Page: 4 ----------------------

SIST EN 860:2000

---------------------- Page: 5 ----------------------

SIST EN 860:2000

---------------------- Page: 6 ----------------------

SIST EN 860:2000

---------------------- Page: 7 ----------------------

SIST EN 860:2000

---------------------- Page: 8 ----------------------

SIST EN 860:2000

---------------------- Page: 9 ----------------------

SIST EN 860:2000

---------------------- Page: 10 ----------------------

SIST EN 860:2000

---------------------- Page: 11 ----------------------

SIST EN 860:2000

---------------------- Page: 12 ----------------------

SIST EN 860:2000

---------------------- Page: 13 ----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19085-7:2020(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)
EN ISO 19085-7:2019

This document deals with all significant hazards, hazardous situation and events as listed in Clause 4 relevant
to stationary and displaceable
- surface planning machines,
- thickness planing machines,
- combined surface/thickness planing machines
with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planing mode)
and with manual loading and unloading of the work-piece.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 860:2009/kprA1:2009(Amendment)
Safety of woodworking machines - One side thickness planing machines
EN 860:2007/prA1
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 859:2009/kFprA1:2009(Amendment)
Safety of woodworking machines - Hand fed surface planing machines
EN 859:2007/FprA1
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 861:2008/kprA1:2009(Amendment)
Safety of woodworking machines - Surface planing and thicknessing machines
EN 861:2007/prA1
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 859:2009+A1:2010/kFprA2:2012(Amendment)
Safety of woodworking machines - Hand fed surface planing machines
EN 859:2007+A1:2009/FprA2

This document specifies all significant hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable hand fed surface planing machines fitted or not with demountable power feed unit hereinafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer.
This document does not apply to machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand; hand held planers or any adaptation permitting their use in a different mode, i.e. bench mounting.
This document is not applicable to hand fed surface planing machines which are manufactured before the date of its publication as EN.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 19085-7:2022(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO/DIS 19085-7:2022)
prEN ISO 19085-7

This document specifies the safety requirements and measures for
— surface planing machines, also called jointers,
— thickness planing machines, also called planers or single surface planers,
— combined surface/thickness planing machines
with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece and capable of continuous production use, hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a) machines with more than one cutter block;
b) machines with a mortising unit driven by a separate motor;
c) machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;
d) machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;
e) machines where surface planing and thickness planing can be performed on the same section of the cutter block at the same time;
f) machines intended for use in potentially explosive atmosphere;
g) machines manufactured prior to the date of its publication as an international standard.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 860:2009+A1:2009/kFprA2:2012(Amendment)
Safety of woodworking machines - One side thickness planing machines
EN 860:2007+A1:2009/FprA2

This document specifies all significant hazards, hazardous situations and events as listed in Clause 4, relevant to stationary and displaceable one side thickness planing machines fitted with an integrated feed and with cutterblock fixed in position and manual loading and unloading of the work-piece, hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard and plywood when they are used as
intended and under the conditions foreseen by the manufacturer.
This document does not apply to machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand; hand held planers or any adaptation permitting their use in a different mode, i.e. bench mounting; thickness planing machines where the cutterblock is adjustable for depth of cut setting.
This document is not applicable to one side thickness planning machines fitted with an integrated feed and with cutterblock fixed in position which are manufactured before the date of its publication as EN.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 861:2008+A1:2009/FprA2:2012(Amendment)
Safety of woodworking machines - Surface planing and thicknessing machines
EN 861:2007+A1:2009/FprA2

This document specifies all significant hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable surface planing and thicknessing machines with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planning mode) and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The cutterblock is fixed in position and for thicknessing an integrated feed is provided. The machines are designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer. This document does not deal with any hazards which result from the attachment of an optional mortising unit. These hazards are covered by prEN 940:2007. This document does not apply to machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; surface planing and thicknessing machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode; machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units; machines where surfacing and thicknessing can be performed at the same time. This document is not applicable to surface planing and thicknessing machines which are manufactured before the date of its publication as EN.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-7:2020(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)
EN ISO 19085-7:2019

This document deals with all significant hazards, hazardous situation and events as listed in Clause 4 relevant
to stationary and displaceable
- surface planning machines,
- thickness planing machines,
- combined surface/thickness planing machines
with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planing mode)
and with manual loading and unloading of the work-piece.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 861:2008/kprA1:2009(Amendment)
Safety of woodworking machines - Surface planing and thicknessing machines
EN 861:2007/prA1
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day