SIST EN 61300-3-1:2006

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-1: Examinations and measurements - Visual examination

This part of IEC 61300 provides criteria for the visual and mechanical examination of fibre optic piece parts, connectors and passive components. The examination method may be used at any stage of the qualification or quality conformance inspection process, as a stand-alone test, or as required by the relevant specification. Visual examination of the polished end-face is defined in IEC/PAS 61300-3-35 and does not form part of this document.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren -- Teil 3-1: Untersuchungen und Messungen - Sichtprüfung

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 3-1: Examens et mesures - Examen visuel

La présente partie de la EN 61300 fournit les critères pour l'examen visuel et mécanique des pièces élémentaires, des connecteurs et des composants passifs à fibre optique. La méthode d'examen peut être utilisée à tout stade du processus de qualification ou de contrôle de la qualité, en tant qu'essai isolé ou en réponse aux exigences de la spécification applicable. L'examen visuel de la face terminale polie est défini dans la CEI/PAS 61300-3-35 et ne fait pas partie du présent document.

Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente – Osnovni preskusni in merilni postopki – 3-1. del: Pregledi in meritve – Vizualni pregled (IEC 61300-3-1:2005)

General Information

• Status: Published
• Publication Date: 28-Feb-2006
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2006
• Due Date: 01-Mar-2006
• Completion Date: 01-Mar-2006
• Ref Project: EN 61300-3-1:2005 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination

Relations

• Replaces: SIST EN 61300-3-1:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination (IEC 61300-3-1:1995)
• Effective Date: 29-Jan-2023
• Revised: SIST EN 61300-3-1:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination (IEC 61300-3-1:1995)
• Effective Date: 13-May-2010
• Replaces: SIST EN 61300-3-1:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination (IEC 61300-3-1:1995)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 61300-3-1:2006

STANDARD
marec 2006
Naprave za medsebojno povezovanje optičnih kablov in pasivne komponente
– Osnovni preskusni in merilni postopki – 3-1. del: Pregledi in meritve –
Vizualni pregled (IEC 61300-3-1:2005)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 3-1: Examinations and measurements - Visual
examination (IEC 61300-3-1:2005)
ICS 33.180.20 Referenčna številka
SIST EN 61300-3-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61300-3-1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2005

ICS 33.180.20 Supersedes EN 61300-3-1:1997


English version


Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures
Part 3-1: Examinations and measurements –
Visual examination
(IEC 61300-3-1:2005)


Dispositifs d'interconnexion et Lichtwellenleiter –
composants passifs à fibres optiques – Verbindungselemente und passive
Méthodes fondamentales d'essais Bauteile –
et de mesures Grundlegende Prüf- und Messverfahren
Partie 3-1: Examens et mesures – Teil 3-1: Untersuchungen und Messungen –
Examen visuel Sichtprüfung
(CEI 61300-3-1:2005) (IEC 61300-3-1:2005)


This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61300-3-1:2005 E

---------------------- Page: 2 ----------------------

EN 61300-3-1:2005 - 2 -
Foreword
The text of document 86B/2172/FDIS, future edition 2 of IEC 61300-3-1, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to
the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-3-1 on 2005-10-01.
This European Standard supersedes EN 61300-3-1:1997.
It constitutes a technical revision on reference methods and equipments for particular parts of the
components.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-10-01
__________
Endorsement notice
The text of the International Standard IEC 61300-3-1:2005 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-1 NOTE Harmonized as EN 61300-1:2003 (not modified).
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



61300-3-1
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2005-09


Dispositifs d'interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 3-1:
Examens et mesures – Examen visuel

Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 3-1:
Examinations and measurements –
Visual examination

 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

61300-3-1  IEC:2005 – 3 –
CONTENTS

FOREWORD.5

1 Scope.9
2 General description.9
3 Apparatus.9
3.1 Visual examination .9
3.2 Mechanical examination.11
4 Procedure.11
4.1 Method 1a – Unaided visual examination .11
4.2 Method 1b – Aided visual examination .11
4.3 Method 2 – Mechanical examination .13
5 Details to be specified.13

Annex A (informative).15

Bibliography .17

---------------------- Page: 5 ----------------------

61300-3-1  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS −
BASIC TEST AND MEASUREMENT PROCEDURES −

Part 3-1: Examinations and measurements –
Visual examination


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by
...