Refrigerant compressors - Rating conditions, tolerances and presentation of performance data

This document specifies the rating conditions, tolerances and the method of presenting performance data of refrigerant compressors.
This document is applicable to single stage compressor and two stage compressor data with or without an additional intermediate pressure inlet.
The performance data of compressors used with R-744 in transcritical operation are covered in this document.
The data relating to the refrigerating capacity, heating capacity and power absorbed include requirements for part load operation where applicable. Presenting performance in this way enables a comparison of different compressors.

Kältemittel-Verdichter - Nennbedingungen, Toleranzen und Darstellung von Leistungsdaten

Dieses Dokument legt die Nennbedingungen, Toleranzen und die Darstellung der Leistungsdaten von Kältemittel-Verdichtern fest.
Dieses Dokument gilt für Daten von einstufigen und zweistufigen Verdichter mit oder ohne zusätzlichen Mitteldruck-Eintritt.
Die Leistungsdaten von Verdichtern, bei denen R 744 im transkritischen Betrieb zur Anwendung kommt, werden von diesem Dokument abgedeckt.
Die Daten beziehen sich auf die Kälteleistung, die Heizleistung und die Leistungsaufnahme und schließen den Teillastbetrieb ein, sofern zutreffend. Diese Darstellung der Leistung ermöglicht den Vergleich verschiedener Verdichter.

Compresseurs pour fluides frigorigènes - Détermination des caractéristiques, tolérances et présentation des données de performance

Le présent document spécifie les conditions de détermination des caractéristiques, les tolérances et le mode de présentation des données de performance, applicables aux compresseurs pour fluides frigorigènes.
Le présent document s’applique aux données de compresseurs mono-étagés et aux compresseurs bi-étagés, avec ou sans entrée de pression intermédiaire supplémentaire.
Les données de performance des compresseurs utilisés avec du R-744 en fonctionnement transcritique sont couvertes dans le présent document.
Les données relatives à la puissance frigorifique, à la puissance calorifique et à la puissance absorbée comprennent les exigences relatives au fonctionnement en charge partielle, quand cela est applicable. Cette manière de présenter les performances permet la comparaison de différents compresseurs.

Kompresorji za hladilne tekočine - Pogoji določanja nazivne moči, toleranc in predstavitev tehničnih karakteristik

General Information

Status
Not Published
Public Enquiry End Date
29-Feb-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
21-Dec-2023
Due Date
09-May-2024

Relations

Buy Standard

Draft
prEN 12900:2024
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12900:2024
01-februar-2024
Nadomešča:
SIST EN 12900:2013
Kompresorji za hladilne tekočine - Pogoji določanja nazivne moči, toleranc in
predstavitev tehničnih karakteristik
Refrigerant compressors - Rating conditions, tolerances and presentation of
performance data
Kältemittel-Verdichter - Nennbedingungen, Toleranzen und Darstellung von
Leistungsdaten
Compresseurs pour fluides frigorigènes - Détermination des caractéristiques, tolérances
et présentation des données de performance
Ta slovenski standard je istoveten z: prEN 12900
ICS:
23.140 Kompresorji in pnevmatični Compressors and pneumatic
stroji machines
27.200 Hladilna tehnologija Refrigerating technology
oSIST prEN 12900:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12900:2024

---------------------- Page: 2 ----------------------
oSIST prEN 12900:2024


DRAFT
EUROPEAN STANDARD
prEN 12900
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2023
ICS 23.140; 27.200 Will supersede EN 12900:2013
English Version

Refrigerant compressors - Rating conditions, tolerances
and presentation of performance data
Compresseurs pour fluides frigorigènes - Conditions de Kältemittel-Verdichter - Nennbedingungen, Toleranzen
détermination des caractéristiques, tolérances et und Darstellung von Leistungsdaten
présentation des performances par le fabricant
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 113.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12900:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12900:2024
prEN 12900:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Rating conditions . 8
4.1 General . 8
4.2 Ambient temperature around the compressor . 8
4.3 Subcooling .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.