SIST EN 1708-1:1999/A1:2004

Welding - Basic weld joint details in steel - Part 1: Pressurized components

The purpose of this standard is to exemplify commonly accepted welded connections in pressure systems. It does not promote the standardization of connections that may be regarded as mandatory or restrict development in any way. Stress analysis rules are to be considered if necessary.  This standard contains examples of connections welded by:   - Metal-arc welding with covered electrode (111);   - Submerged arc welding with wire electrode (121);   - Metal-arc inert gas welding; MIG-welding (131);   - Metal-arc active gas welding; MAG-welding (135);   - Flux-cored wire metal-arc welding with active gas shield (136);   - Flux-cored wire metal-arc welding with inert gas shield (137);   - Tungsten inert gas arc welding; TIG-welding (141);  processes (process numbers according to EN 24063) in steel pressure systems. Other processes by agreement.  The estimation of the suitability of welded connections for special service conditions, for example corrosion, creep, low temperture and fatigue are not specially considered.

Schweißen - Verbindungselemente beim Schweißen von Stahl - Teil 1: Druckbeanspruchte Bauteile

Diese Norm enthält beispielhaft allgemein übliche Schweißverbindungen an druckbeanspruchten Bauteilen. Sie ersetzt nicht die Normung von vorgeschriebenen Verbindungen oder schränkt die Entwicklung in irgendeiner Weise ein. Falls erforderlich, sind die Regeln der Spannungsberechnung zu beachten.

Soudage - Descriptif de base des assemblages soudés en acier - Partie 1 : Composants soumis a la pression

La présente norme européenne a pour objet d'illustrer par des exemples des assemblages soudés généralement adoptés pour la construction de récipients a pression. Elle ne vise aucunement a promouvoir pour ces assemblages une normalisation qui puisse etre considérée comme obligatoire ou a en restreindre le développement de quelque façon que ce soit. Les regles d'analyse des contraintes doivent etre prises en considération si nécessaire.

Varjenje - Opis zvarnih spojev na jeklu - 1. del: Deli tlačne opreme

General Information

• Status: Withdrawn
• Publication Date: 31-May-2004
• Withdrawal Date: 15-Feb-2010
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 16-Feb-2010
• Due Date: 11-Mar-2010
• Completion Date: 16-Feb-2010
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 1708-1:1999/A1:2003 - Welding - Basic weld joint details in steel - Part 1: Pressurized components

Relations

• Replaced By: SIST EN 1708-1:2010 - Welding - Basic welded joint details in steel - Part 1: Pressurized components
• Effective Date: 01-Apr-2010
• Amends: SIST EN 1708-1:1999 - Welding - Basic weld joint details in steel - Part 1: Pressurized components
• Effective Date: 01-Jun-2004
• Amends: SIST EN 1708-1:1999 - Welding - Basic weld joint details in steel - Part 1: Pressurized components
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1708-1:1999/A1:2004
01-junij-2004
9DUMHQMH2SLV]YDUQLKVSRMHYQDMHNOXGHO'HOLWODþQHRSUHPH
Welding - Basic weld joint details in steel - Part 1: Pressurized components
Schweißen - Verbindungselemente beim Schweißen von Stahl - Teil 1:
Druckbeanspruchte Bauteile
Soudage - Descriptif de base des assemblages soudés en acier - Partie 1 : Composants
soumis a la pression
Ta slovenski standard je istoveten z: EN 1708-1:1999/A1:2003
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN 1708-1:1999/A1:2004 en
2003-01.Slovenski inštitut
...