iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1708-1:1999

(Main)

Welding - Basic weld joint details in steel - Part 1: Pressurized components

Welding - Basic weld joint details in steel - Part 1: Pressurized components

The purpose of this standard is to exemplify commonly accepted welded connections in pressure systems. It does not promote the standardization of connections that may be regarded as mandatory or restrict development in any way. Stress analysis rules are to be considered if necessary.  This standard contains examples of connections welded by:   - Metal-arc welding with covered electrode (111);   - Submerged arc welding with wire electrode (121);   - Metal-arc inert gas welding; MIG-welding (131);   - Metal-arc active gas welding; MAG-welding (135);   - Flux-cored wire metal-arc welding with active gas shield (136);   - Flux-cored wire metal-arc welding with inert gas shield (137);   - Tungsten inert gas arc welding; TIG-welding (141);  processes (process numbers according to EN 24063) in steel pressure systems. Other processes by agreement.  The estimation of the suitability of welded connections for special service conditions, for example corrosion, creep, low temperture and fatigue are not specially considered.

Schweißen - Verbindungselemente beim Schweißen von Stahl - Teil 1: Druckbeanspruchte Bauteile

Diese Norm enthält beispielhaft allgemein übliche Schweißverbindungen an druckbeanspruchten Bauteilen. Sie ersetzt nicht die Normung von vorgeschriebenen Verbindungen oder schränkt die Entwicklung in irgendeiner Weise ein. Falls erforderlich, sind die Regeln der Spannungsberechnung zu beachten.

Soudage - Descriptif de base des assemblages soudés en acier - Partie 1: Composants soumis a la pression

La présente norme européenne a pour objet d'illustrer par des exemples des assemblages soudés généralement adoptés pour la construction de récipients a pression. Elle ne vise aucunement a promouvoir pour ces assemblages une normalisation qui puisse etre considérée comme obligatoire ou a en restreindre le développement de quelque façon que ce soit. Les regles d'analyse des contraintes doivent etre prises en considération si nécessaire.

Varjenje - Opis zvarnih spojev na jeklu - 1. del: Deli tlačne opreme

General Information

Status
Withdrawn
Publication Date
30-Nov-1999
Withdrawal Date
15-Feb-2010
ICS
25.160.40 - Welded joints and welds
Technical Committee
VAR - Welding
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Feb-2010
Due Date
11-Mar-2010
Completion Date
16-Feb-2010
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 1708-1:1999 - Welding - Basic weld joint details in steel - Part 1: Pressurized components

Relations

Replaced By
SIST EN 1708-1:2010 - Welding - Basic welded joint details in steel - Part 1: Pressurized components
Effective Date
01-Apr-2010
Child
SIST EN 1708-2:2001 - Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components
Effective Date
22-Dec-2008
Amended By
SIST EN 1708-1:1999/A1:2004 - Welding - Basic weld joint details in steel - Part 1: Pressurized components
Effective Date
01-Jun-2004
Amended By
SIST EN 1708-1:1999/A1:2004 - Welding - Basic weld joint details in steel - Part 1: Pressurized components
Effective Date
08-Jun-2022
Replaced By
SIST EN 1708-1:2010 - Welding - Basic welded joint details in steel - Part 1: Pressurized components
Effective Date
08-Jun-2022

Buy Standard

EN 1708-1:1999EN 1708-1:1999
PreviousNext
Standard
EN 1708-1:1999
English language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HPHSchweißen - Verbindungselemente beim Schweißen von Stahl - Teil 1: Druckbeanspruchte BauteileSoudage - Descriptif de base des assemblages soudés en acier - Partie 1: Composants soumis a la pressionWelding - Basic weld joint details in steel - Part 1: Pressurized components25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN 1708-1:1999SIST EN 1708-1:1999en01-december-1999SIST EN 1708-1:1999SLOVENSKI
STANDARD



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST EN 1708-1:1999



SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 5173:2023(Main)
Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023)
EN ISO 5173:2023

This document specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to reveal imperfections on or near the surface of the test specimen which is under tension during bend testing and/or assess ductility. It also gives the dimensions of the test specimen.
In addition, this document specifies methods to be used instead of transverse bend tests with a former for welded joints when base materials, heat affected zones and/or weld metal have a significant difference in their physical and mechanical properties in relation to bending.
This document applies to metallic materials in all forms of product with welded joints made by any welding process.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5817:2023(Main)
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)
EN ISO 5817:2023

This document specifies quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness ≥ 0,5 mm. It covers fully penetrated butt welds and all fillet welds. Its principles can also be applied to partial-penetration butt welds.
Quality levels for beam-welded joints in steel are presented in ISO 13919-1.
Three quality levels are given in order to permit application to a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld.
Several types of loads are considered, e.g. static load, thermal load, corrosion load, pressure load. Additional guidance on fatigue loads is given in Annex B.
The quality levels refer to production and good workmanship.
This document is applicable to:
a)       non-alloy and alloy steels;
b)       nickel and nickel alloys;
c)        titanium and titanium alloys;
d)       manual, mechanized and automatic welding;
e)       all welding positions;
f)         all types of welds, e.g. butt welds, fillet welds and branch connections;
g)       the following welding processes and their sub-processes, as defined in ISO 4063:
—     11 metal arc welding without gas protection;
—     12 submerged arc welding;
—     13 gas-shielded metal arc welding;
—     14 gas-shielded arc welding with non-consumable tungsten electrode;
—     15 plasma arc welding;
—     31 oxyfuel gas welding (for steel only).
Metallurgical aspects, such as grain size and hardness, are not covered by this document.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17636-2:2023(Main)
Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2022)
EN ISO 17636-2:2022

This document specifies techniques of digital radiography with the object of enabling satisfactory and repeatable results. The techniques are based on generally recognized practice and fundamental theory of the subject.
This document applies to the digital radiographic testing of fusion welded joints in metallic materials. It applies to the joints of plates and pipes. Besides its conventional meaning, “pipe”, as used in this document, covers other cylindrical bodies such as tubes, penstocks, boiler drums and pressure vessels.
This document specifies the requirements for digital radiographic X- and gamma-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDAs) of the welded joints of metallic plates and tubes for the detection of imperfections. It includes manual and automated inspection with DDAs.
Digital detectors provide a digital grey value image which can be viewed and evaluated using a computer (Annex E). This document specifies the recommended procedure for detector selection and radiographic practice. Selection of computer, software, monitor, printer and viewing conditions are important, but are not the main focus of this document. The procedure specified in this document provides the minimum requirements for radiographic practice which permits exposure and acquisition of digital radiographs with equivalent sensitivity for the detection of imperfections as film radiography (specified in ISO 17636-1).
This document does not specify acceptance levels for any of the indications found on the digital radiographs. ISO 10675 provides information on acceptance levels for weld inspection.
If contracting parties apply lower test criteria, it is possible that the quality achieved will be significantly lower than when this document is strictly applied.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10447:2023(Main)
Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
EN ISO 10447:2022

This document specifies the procedures and recommended tooling to be used for peel and chisel testing of resistance spot and embossed projection welds. This document applies to welds made in two or more sheets in the thickness range of 0,5 mm to 3,0 mm.
The aim of these tests is to determine:
—    weld size and failure mode when welds are destructively tested;
—    verification of welds by non-destructive chisel tests.
NOTE      The preferred method of peel testing seam welds (mechanized peel testing) is covered in ISO 14270.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4761:2023(Main)
Non-destructive testing of welds - Phased array ultrasonic testing (UT-PA) for thin-walled steel components - Acceptance levels (ISO 4761:2022)
EN ISO 4761:2022

This document specifies acceptance levels for the phased array ultrasonic testing technique (UT-PA) of full-penetration welds in low-alloy and/or fine-grained steels in the wall thickness range from 3,2 mm to 8 mm which correspond to the quality levels of ISO 5817.
These acceptance levels are applicable to indications detected according to ISO 20601.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17636-1:2023(Main)
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022)
EN ISO 17636-1:2022

This document specifies techniques of radiographic testing of fusion-welded joints in metallic materials using industrial radiographic film techniques with the object of enabling satisfactory and repeatable results. The techniques are based on generally recognized practice and fundamental theory of the subject.
It applies to the joints of plates and pipes in metallic materials. Besides its conventional meaning, “pipe” as used in this document covers other cylindrical bodies, such as tubes, penstocks, boiler drums and pressure vessels.
This document does not specify acceptance levels for any of the indications found on the radiographs. The ISO 10675 series provides information on acceptance levels for weld evaluation.
If contracting parties apply lower test criteria, it is possible that the quality achieved will be significantly lower than when this document is strictly applied.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4136:2022(Main)
Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2022)
EN ISO 4136:2022

This document specifies the sizes of test specimen and the procedure for carrying out transverse tensile
tests in order to determine the tensile strength and the location of fracture of a welded butt joint.
This document applies to metallic materials in all forms of product with joints made by any welded butt
joint.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17639:2022(Main)
Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2022)
EN ISO 17639:2022

This document gives recommendations for specimen preparation, test procedures and their main
objectives for macroscopic and microscopic examination.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9016:2022(Main)
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2022)
EN ISO 9016:2022

This document specifies the method to be used when describing test specimen location and notch
orientation for the testing and reporting of impact tests on welded butt joints.
This document applies to impact tests on metallic materials in all forms of product made by any fusion
and pressure welding process.
It is used in addition to the ISO 148 series and includes test specimen denomination and additional
reporting requirements.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10675-2:2022(Main)
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021)
EN ISO 10675-2:2021

This document specifies acceptance levels for indications from imperfections in aluminium butt welds
detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds
(such as fillet welds etc.) or materials.
The acceptance levels can be related to welding standards, application standards, specifications or
codes. This document assumes that the radiographic testing has been carried out in accordance with
ISO 17636-1 for RT-F (F = film) or ISO 17636-2 for RT-S (S = radioscopy) and RT-D (D = digital detectors)

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day