iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 16475-3:2016/oprA1:2018

(Amendment)

Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods

Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods

This European standard specifies the requirements and test methods for draught regulators and standstill opening devices that are used as components, carrying flue gases, in order to limit the draught in chimneys and provide secondary air to the chimney.
Draught regulators and standstill opening devices for positive pressure chimneys are not covered by this standard.
It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

Abgasanlagen - Zubehörteile - Teil 3: Selbsttätig arbeitende, zwangsgesteuerte und kombinierte Nebenluftvorrichtungen - Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Anforderungen und Prüfverfahren für selbständig arbeitende und zwangsgesteuerte Nebenluftvorrichtungen fest, die zum Transport von Abgasen verwendet werden, um den Unterdruck  in Abgasanlagen zu begrenzen und die Abgasanlage mit Nebenluft zu versorgen.
Selbständig arbeitende und zwangsgesteuerte Nebenluftvorrichtungen für Überdruckabgasanlagen werden von dieser Norm nicht abgedeckt.
Sie legt außerdem die Anforderungen an die Kennzeichnung, Herstelleranweisungen, Produktinformationen und Bewertung und Überprüfung der Leistungsbeständigkeit fest.

Conduits de fumée - Accessoires - Partie 3: Régulateurs de tirage, dispositifs d'ouverture pour période d'arrêt et dispositifs combinés d'air secondaire - Exigences et méthodes d'essai

La présente Norme européenne spécifie les exigences et les méthodes d'essai s'appliquant aux régulateurs de tirage et aux dispositifs d’ouverture pour période d’arrêt, utilisés comme composants, transportant les fumées, afin de limiter le tirage dans les conduits et de fournir de l'air secondaire.
Les régulateurs de tirage et les dispositifs d’ouverture pour période d’arrêt destinés aux conduits de fumée en pression positive n'entrent pas dans le domaine d'application de la présente norme.
La présente norme spécifie également les exigences en matière de marquage, d'instructions du fabricant, d'informations produit et d'évaluation de la conformité.

Dimovodne naprave - Oprema - 3. del: Regulatorji vleka, lopute z motornim pogonom in kombinirane lopute za sekundarni zrak - Zahteve in preskusne metode

General Information

Status
Not Published
Public Enquiry End Date
14-Jan-2018
ICS
91.060.40 - Chimneys, shafts, ducts
Technical Committee
POZ - Požarna varnost
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
11-Jan-2019
Due Date
16-Jan-2019
Completion Date
11-Jan-2019
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/105 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on chimneys, flues and specific products
Ref Project
EN 16475-3:2016/prA1 - Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods

Relations

Consolidated By
SIST EN 16475-3:2016+A1:2019 - Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods
Effective Date
18-Jan-2023
Amends
SIST EN 16475-3:2016 - Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods
Effective Date
01-Jan-2018
Consolidated By
SIST EN 16475-3:2016+A1:2019 - Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and combined secondary air devices - Requirements and test methods
Effective Date
19-Jan-2023

Buy Standard

EN 16475-3:2016/oprA1:2018EN 16475-3:2016/oprA1:2018
PreviousNext
Draft
EN 16475-3:2016/oprA1:2018
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16475-3:2016/oprA1:2018
01-januar-2018
Dimovodne naprave - Oprema - 3. del: Regulatorji vleka, lopute z motornim
pogonom in kombinirane lopute za sekundarni zrak - Zahteve in preskusne metode
Chimneys - Accessories - Part 3: Draught regulators, standstill opening devices and
combined secondary air devices - Requirements and test methods
Abgasanlagen - Zubehörteile - Teil 3: Selbsttätig arbeitende, zwangsgesteuerte und
kombinierte Nebenluftvorrichtungen - Anforderungen und Prüfverfahren
Conduits de fumée - Accessoires - Partie 3: Régulateurs de tirage, dispositifs d'ouverture
pour période d'arrêt et dispositifs combinés d'air secondaire - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 16475-3:2016/prA1
ICS:
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
SIST EN 16475-3:2016/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16475-3:2016/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN 16475-3:2016/oprA1:2018


DRAFT
EUROPEAN STANDARD
EN 16475-3:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
November 2017
ICS 91.060.40
English Version

Chimneys - Accessories - Part 3: Draught regulators,
standstill opening devices and combined secondary air
devices - Requirements and test methods
Conduits de fumée - Accessoires - Partie 3: Régulateurs Abgasanlagen - Zubehörteile - Teil 3: Selbsttätig
de tirage, dispositifs d'ouverture pour période d'arrêt arbeitende, zwangsgesteuerte und kombinierte
et dispositifs combinés d'air secondaire - Exigences et Nebenluftvorrichtungen - Anforderungen und
méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 166.

This draft amendment A1, if approved, will modify the European Standard EN 16475-3:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This doc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1366-10:2022(Main)
Fire resistance tests for service installations - Part 10: Smoke control dampers
EN 1366-10:2022

This document specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions.
It is of note that the smoke control damper to be tested could require testing to EN 1366 2 and that this is for consideration before carrying out these tests.
Smoke control damper tests are used to confirm that the furnace testing requirements of EN 12101 8 are met and EN 12101 8 is for consideration before carrying out these tests.
Smoke control dampers tested to this document are expected to be classified using EN 13501 4 and this document is expected to be considered before carrying out these tests.
To this end, this document is expected to be read in conjunction with EN 12101 8, EN 13501 4, EN 1366 2 and EN 1363 1, the latter giving further details for fire resistance testing.
For installation details, the requirements for smoke extraction ducts are for consideration and these are defined in EN 1366 8 and EN 1366 9.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15882-2:2022(Main)
Extended application of results from fire resistance tests for service installations - Part 2: Fire dampers
EN 15882-2:2022

This document provides guidance and rules to notified bodies (for fire dampers) allowing them to produce/validate an extended field of application report for fire dampers. This document identifies the parameters that affect the fire resistance of dampers. It also identifies the factors that need to be considered when deciding whether, or by how much, the parameter can be extended when contemplating the fire resistance performance of an untested, or untestable variation in the construction.
This document explains the principles behind how a conclusion on the influence of specific parameters/constructional details relating to the relevant criteria (E, I, S) can be achieved.
This document does not cover dampers used for smoke control.
It is the intention that the application of this document makes it possible to identify which specifications to test to maximize the field of application. Some information on test programmes is given for guidance purposes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-5:2021(Main)
Fire resistance tests for service installations - Part 5: Service ducts and shafts
EN 1366-5:2021

This European Standard specifies a method for determining the fire resistance of horizontal service ducts and vertical service shafts, which pass through walls or floors and enclose pipes and cables. The test examines the behaviour of ducts and shafts exposed to fire from outside and from inside the duct. This European Standard is intended to be read in conjunction with EN 1363-1.
This European Standard does not examine the risk of fire spread as a result of thermal conduction along the piping installed in service ducts or shafts, or thermal conduction through the media these pipes carry. It does not cover the risk of damage produced by thermal elongation or shortening of tubes and cables as a result of fire, or damaged pipe suspensions. This European Standard does not give guidance on how to test one, two or three sided service ducts or shafts.
NOTE   Guidance on testing service ducts and shafts of less than four sides will be covered in the extended field of application rules being developed by CEN/TC 127.
This test is unsuitable for evaluating service ducts with internal barriers at walls and floors.
Whilst the walls of service ducts or shafts tested to this method may provide specified levels of integrity or insulation, testing to this European Standard does not replace the testing of the functional endurance of small electrical cables which is covered in EN 50200.
Fire resistance testing of ducts for air distribution systems is covered in EN 1366-1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-1:2014+A1:2020(Main)
Fire resistance tests for service installations - Part 1: Ventilation ducts
EN 1366-1:2014+A1:2020

This Part of EN 1366 specifies a method for determining the fire resistance of vertical and horizontal ventilation ducts including those access panels, which are integral part of the tested ducts. The test examines the behaviour of ducts exposed to fire from the outside (duct A) and fire inside the duct (duct B). This Standard is used in conjunction with EN1363-1.
Annex A provides general guidance and gives background information.
This European Standard is not applicable to:
a)   ducts whose fire resistance depends on the fire resistance performance of a ceiling or wall(where ducts are located in cavities enclosed by fire-resistant shafts or ceilings);
b)   ducts containing fire dampers at points where they pass through fire separations;
c)   one, two or three sided ducts;
d)   fixing of suspension devices (e.g. anchors) to floors or walls.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-7:2016+A1:2020(Main)
Chimneys - Accessories - Part 7: Rain caps - Requirements and test methods
EN 16475-7:2016+A1:2020

This European Standard specifies requirements and test methods for rain caps that are used as components, subject to flue gas, in order to prevent rain entry into the chimneys. Rain caps already tested together with system chimney products or other chimney components, e.g. terminals, are not covered by this standard. Rain caps incorporating a bird guard are also included. It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-6:2020(Main)
Chimneys - Accessories - Part 6: Access components - Requirements and test methods
EN 16475-6:2020

This European Standard specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The standard is limited to access components with a door opening area up to 0,27 m2.
Products not freely ventilated are excluded from this standard.
This standard also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.
Access components already tested together with system chimney products or other chimney components, e.g. flue liners, are not covered by this standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-1:2020(Main)
Chimneys - Accessories - Part 1: Chimney silencers - Requirements and test methods
EN 16475-1:2020

This European Standard specifies requirements and test methods for flue gas silencers made of metal that are used as accessories in order to reduce the noise level of combustions appliances.
The standard covers silencers in the connecting flue pipes and on top of chimneys.
This standard does not cover silencers installed as chimney sections. This standard excludes active silencers.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16475-4:2020(Main)
Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods
EN 16475-4:2020

This European standard specifies the requirements and test methods for flue dampers that are used as
components, carrying flue gas, in order to limit the flow in a chimney.
Flue dampers may be manually adjusted, sited in connecting flue pipes or chimneys, in order to reduce the burning rate (solid fuel stoves/fireplaces) or to work as a shut-off slide preventing back flow of soot during cleaning of the chimney, or mechanically driven for reducing/closing the flue, in order to reduce the Stand-by losses or to prevent the backflow of the flue gas e.g. in case of multi-served chimneys.
This European standard covers only flue dampers incorporated in a housing and installed inside a building. Flue dampers already tested together with system chimney products or other chimney components, e.g. flue liners, connecting flue pipes, are not covered by this standard.
This European standard also specifies the requirements for marking, manufacturers’ instruction, product
information, Assessment and Verification of Constancy of Performance (AVCP), cleaning and maintenance.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1366-12:2014+A1:2020(Main)
Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork
EN 1366-12:2014+A1:2019

This part of EN 1366 specifies a method for determining the fire resistance of non-mechanical fire barriers installed in fire separating elements designed to withstand heat and the passage of smoke and gases at high temperature. This European Standard is used in conjunction with EN 1363-1 and EN 1366-2.
This European Standard is not suitable for testing non-mechanical fire barriers in suspended ceilings without modification.
This European Standard is not suitable for testing fire dampers, see EN 1366-2.
This European Standard is not suitable for testing such products as air transfer grilles, as the pressures and flows involved are different and may cause differing behaviour.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13384-2:2015+A1:2019(Main)
Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys serving more than one heating appliance
EN 13384-2:2015+A1:2019

This part of EN 13384 specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliance.
This part of EN 13384 covers both the cases, either
a)   where the chimney is connected with more than one connecting flue pipe from individual or several appliances in a multi-inlet arrangement; or
b)   where the chimney is connected with an individual connecting flue pipe connecting more than one appliance in a cascade arrangement.
The case of multiple inlet cascade arrangement is covered by the case a).
This part of EN 13384 deals with chimneys operating under negative pressure conditions (there can be positive pressure condition in the connecting flue pipe) and with chimneys operating under positive pressure conditions and is valid for chimneys serving heating appliances for liquid, gaseous and solid fuels.
This part of EN 13384 does not apply to:
-   chimneys with different thermal resistance or different cross-section in the various chimney segments. This part does not apply to calculate energy gain;
-   chimneys with open fire places, e.g. open fire chimneys or chimney inlets which are normally intended to operate open to the room;
-   chimneys which serve different kinds of heating appliances regarding natural draught, fan assisted, forced draught or combustion engine. Fan assisted appliances with draught diverter between the fan and the chimney are considered as natural draught appliances;
-   chimneys with multiple inlets from more than 5 storeys. (This does not apply to balanced flue chimney.);
-   chimneys serving heating appliances with open air supply through ventilation openings or air ducts, which are not installed in the same air supply pressure region (e.g. same side of building).
For positive pressure chimneys this part only applies if any heating appliance which is out of action can be positively isolated to prevent flue gas back flow.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day