iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 17873:2022

(Main)

Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing

Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing

This document specifies instructions for mounting and fixing for reaction to fire testing of factory-made underlays for discontinuous roof coverings and walls and contains provisions for direct and extended application rules.

Abdichtungsbahnen - Unterdeck- und Unterspannbahnen für Dachdeckungen und Wände - Anleitung für Befestigung und Montage für die Prüfung zum Brandverhalten

Dieses Dokument legt Anleitungen für Befestigung und Montage für die Prüfung zum Brandverhalten von industriell gefertigten Unterdeck- und Unterspannbahnen für Dachdeckungen und Wände fest und enthält Festlegungen für direkte und erweiterte Anwendungsregeln.

Feuilles souples d'étanchéité - Écrans souples de sous-toiture pour couverture en petits éléments discontinus et écrans souples pour murs extérieurs - Instructions de montage et de fixation pour l’essai de réaction au feu

Le présent document spécifie des instructions de montage et de fixation pour l’essai de réaction au feu des écrans souples de sous-toiture pour couverture en petits éléments discontinus et des écrans souples de murs extérieurs manufacturés. Il contient également des dispositions relatives aux règles d’applications directe et étendue.

Hidroizolacijski trakovi - Podložne folije za strešne kritine in stene - Navodila za montažo in pritrditev za požarno testiranje

General Information

Status
Not Published
Public Enquiry End Date
29-Sep-2022
ICS
13.220.50 - Fire-resistance of building materials and elements
91.100.50 - Binders. Sealing materials
Technical Committee
VLA - Water proofing
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
21-Sep-2023
Due Date
09-Nov-2023
Ref Project
FprEN 17873 - Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls - Instructions for mounting and fixing for reaction to fire testing

Buy Standard

prEN 17873:2022prEN 17873:2022
PreviousNext
Draft
prEN 17873:2022
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17873:2022
01-september-2022
Hidroizolacijski trakovi - Podložne folije za strešne kritine in stene - Navodila za
montažo in pritrditev za požarno testiranje
Flexible sheets for waterproofing - Underlays for discontinuous roof coverings and walls -
Instructions for mounting and fixing for reaction to fire testing
Abdichtungsbahnen - Unterdeck- und Unterspannbahnen für Dachdeckungen und
Wände - Anleitung für Befestigung und Montage für die Prüfung zum Brandverhalten
Feuilles souples d'étanchéité - Écrans souples de sous-toiture pour couverture en petits
éléments discontinus et écrans souples pour murs extérieurs - Instructions de montage
et de fixation pour l’essai de réaction au feu
Ta slovenski standard je istoveten z: prEN 17873
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 17873:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17873:2022

---------------------- Page: 2 ----------------------
oSIST prEN 17873:2022


DRAFT
EUROPEAN STANDARD
prEN 17873
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2022
ICS 13.220.50; 91.100.50
English Version

Flexible sheets for waterproofing - Underlays for
discontinuous roof coverings and walls - Instructions for
mounting and fixing for reaction to fire testing
Feuilles flexibles pour l'imperméabilisation - Sous- Flexible Bahnen für Abdichtungen - Unterspannbahnen
couches pour couvertures et murs discontinus - für Dacheindeckungen und Wände - Montage- und
Instructions de montage et de fixation pour la réaction Befestigungshinweise für das Brandverhalten
aux essais au feu
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 254.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17873:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17873:2022
prEN 17873:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 6
5 Instructions for mounting and fixing of test specimens . 7
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1366-4:2021(Main)
Fire resistance tests for service installations - Part 4: Linear joint seals
EN 1366-4:2021

This document specifies a method for determining the fire resistance of linear joint seals based on their intended end use. This document is used in conjunction with EN 1363-1.
The following tests are included in this document:
-   no mechanically induced movement;
-   mechanically induced movement.
This document does not provide quantitative information on the rate of leakage of smoke and/or hot gases, or on the transmission or generation of fumes.
The load-bearing capacity of a linear joint seal is not addressed in this document.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14187-7:2019(Main)
Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame
EN 14187-7:2019

This draft European Standard specifies a test method for determination of the resistance to flame of cold applied joint sealants for use in joints in roads, air fields and other trafficked areas.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15882-4:2012(Main)
Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals
EN 15882-4:2012

This European standard prescribes the methodology and specifies rules for the preparation of extended application reports for linear joint sealing systems tested in accordance with EN 1366-4. The field of the extended application reports is additional to the direct field of application given within EN 1366-4 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application.
Mechanical metal seals are not part of the scope of this European standard.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 14187-7:2014(Main)
Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame
prEN 14187-7

This European Standard specifies a test method for determination of the resistance to flame of cold applied joint sealants for use in joints in roads, air fields and other trafficked areas.

  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17900:2023(Main)
Leather - Standard data for the calculation of leather density
EN 17900:2023

This document specifies average values of leather density, depending on animal origin and thickness of finished leather, to be used for the calculation of LCA. This document is applicable to bovine, caprine and ovine types of leather, except for vegetable sole leather, which is traded by weight.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-4-43:2023(Main)
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent (IEC 60364-4-43:2023)
HD 60364-4-43:2023

IEC 60364-4-43:2023 provides requirements for:
- protection of live conductors, PEN conductors, PEM conductors, and PEL conductors against the harmful effects caused by overcurrent;
- coordination of measures for protection against overcurrent.
This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the standard has been restructured, see Table 1 (Correspondence between IEC 60364‑4‑43:2008 and this document) below;
b) the measure "automatic disconnection of supply" has been designated as the preferred measure for protection against overcurrent;
c) all measures except the measure "automatic disconnection of supply" have been transferred into new normative annexes to indicate that these measures are usable in certain applications and under certain restricted conditions only (see Annex A, Annex B and Annex E);
d) a new clause "Terms and definitions" has been added;
e) new requirements have been added for the protection of the neutral or mid-point conductor (with and without triplen harmonics).

  • Standardization document
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13849-1:2023(Main)
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023)
EN ISO 13849-1:2023

This document specifies a methodology and provides related requirements, recommendations and guidance for the design and integration of safety‐related parts of control systems (SRP/CS) that perform safety functions, including the design of software.
This document applies to SRP/CS for high demand and continuous modes of operation including their subsystems, regardless of the type of technology and energy (e.g. electrical, hydraulic, pneumatic, and mechanical). This document does not apply to low demand mode of operation.
NOTE 1        See 3.1.44 and the IEC 61508 series for low demand mode of operation.
This document does not specify the safety functions or required performance levels (PLr) that are to be used in particular applications.
NOTE 2        This document specifies a methodology for SRP/CS design without considering if certain machinery (e.g. mobile machinery) has specific requirements. These specific requirements can be considered in a Type‑C standard.
This document does not give specific requirements for the design of products/components that are parts of SRP/CS. Specific requirements for the design of some components of SRP/CS are covered by applicable ISO and IEC standards.
This document does not provide specific measures for security aspects (e.g. physical, IT-security, cyber security).
NOTE 3        Security issues can have an effect on safety functions. See ISO/TR 22100-4 and IEC/TR 63074 for further information.

  • Standard
    167 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21368:2023(Main)
Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures (ISO 21368:2022)
EN ISO 21368:2023

This document provides guidelines describing the adhesive bonding quality requirements suitable for use by adhesive user-
companies utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various approaches to meeting
quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the
importance of maintaining quality standards in fabrication and reporting procedures, keeping records and thus enabling
documentation to provide the basis for risk evaluation of adhesively bonded structures in service and in use.
These guidelines have been prepared such that:
a) they are independent of the type of adhesively bonded structure;
b) they are independent of adhesive user-companies’ and suppliers’ product recommendations;
c) they define the quality requirements for adhesive bonding in terms of fabrication and reporting procedures, both in workshops and
on site;
d) they can be used as the basis for risk evaluation of adhesively bonded structures in service and in use;
e) they can be used as a basis for assessing a fabricator's capability to produce adhesively bonded structures fulfilling specified
quality requirements when they are detailed in one or more of the following:
— a contract between the parties involved;
— an application standard;
— a regulatory statement.
The guidelines contained within this document can be adopted in full or selectively chosen by the adhesive user to suit the structure
concerned. The guidelines provide a flexible framework for the control of adhesive bonding activities in the following cases.
Case 1
The provision of specific requirements for adhesive bonding in contracts that require the adhesive user to have a quality system other
than ISO 9001.
Case 2
The provision of specific requirements for adhesive bonding as guidance to an adhesive user developing a quality system.
Case 3
The provision of specific requirements for references in application standards that uses adhesive bonding as part of its requirements
or in a contract between relevant parties.
Case 4
The provision of a framework for fabrication and reporting procedures to a quality standard, suitable in particular as a basis for the risk
evaluation of adhesively bonded structures

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63281-1:2023(Main)
E-Transporters - Part 1: Terminology and classification (IEC 63281-1:2023)
EN IEC 63281-1:2023
  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62561-3:2023(Main)
Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) (IEC 62561-3:2023)
EN IEC 62561-3:2023

IEC 62561-3:2023 is available as IEC 62561-3:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62561-3:2023 specifies the requirements and tests for isolating spark gaps (ISGs) for lightning protection systems. ISGs can be used to indirectly bond a lightning protection system to other nearby metalwork where a direct bond is not permissible for functional reasons. This third edition cancels and replaces the second edition, published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition.
a) alignment with the latest edition of ISO 22479 relating to humid sulphurous atmosphere treatment;
b) addition of a new normative Annex D for the applicability of previous tests.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day