SIST EN 14574:2015
(Main)Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
This European standard specifies an index test method to determine the puncture resistance of a geosynthetic on a rigid support.
This method simulates the efficiency of a geosynthetic protecting a geosynthetic barrier material or an other contact surface against sharp rigid elements under short term loading.
Geokunststoffe - Bestimmung der Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter Unterlage
Dieses Dokument legt ein Index-Prüfverfahren zur Bestimmung des Durchdrückwiderstandes eines Geokunststoffes auf einer harten Unterlage fest.
Dieses Verfahren simuliert die Wirksamkeit eines Geokunststoffes in seiner Funktion als Schutz einer geosynthetischen Dichtungsbahn oder einer sonstigen Berührungsfläche gegen scharfe starre Gegenstände unter kurzzeitiger Belastung.
Géosynthétiques - Détermination de la résistance au poinçonnement pyramidal de géosynthétiques sur support
Le présent document décrit une méthode d'essai de référence pour la détermination de la résistance au poinçonnement pyramidal d'un géosynthétique sur support rigide.
Cette méthode permet, par simulation, d'évaluer l’efficacité d'un géosynthétique à protéger une géomembrane ou toute autre surface de contact contre les éléments rigides et tranchants sous une charge à court terme.
Geosintetika - Ugotavljanje prebodne odpornosti podporne geosintetike proti preluknjanju s piramidnim bodalom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosintetika - Ugotavljanje prebodne odpornosti podporne geosintetike proti preluknjanju s piramidnim bodalomGeokunststoffe - Bestimmung der Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter UnterlageGéosynthétiques - Détermination de la résistance au poinçonnement pyramidal de géosynthétiques sur supportGeosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 14574:2015SIST EN 14574:2015en,fr,de01-junij-2015SIST EN 14574:2015SLOVENSKI
STANDARDSIST EN 14574:20051DGRPHãþD
SIST EN 14574:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14574
April 2015 ICS 59.080.70 Supersedes EN 14574:2004English Version
Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
Géosynthétiques - Détermination de la résistance au poinçonnement pyramidal des géosynthétiques sur support Geokunststoffe - Bestimmung des Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter Unterlage This European Standard was approved by CEN on 14 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14574:2015 ESIST EN 14574:2015
EN 14574:2015 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus . 4 5.1 Test configuration . 4 5.2 Underlying aluminium medium . 5 5.3 Loading piston . 5 5.4 Electrical equipment for the determination of the push-through load . 6 6 Specimens . 6 6.1 Sampling . 6 6.2 Number and dimension of specimens . 6 7 Conditioning . 6 8 Procedure . 7 9 Calculation and expression of test results . 7 10 Test report . 7
SIST EN 14574:2015
EN 14574:2015 (E) 3 Foreword This document (EN 14574:2015) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14574:2004. Significant technical changes in comparison to the previous edition include: — Annex A (informative) has been deleted. According to the CEN-CENELEC Internal Regulations, the national
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosintetika - Ugotavljanje prebodne odpornosti podporne geosintetike proti preluknjanju s piramidnim bodalomGeokunststoffe - Bestimmung der Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter UnterlageGéosynthétiques - Détermination de la résistance au poinçonnement pyramidal de géosynthétiques sur supportGeosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:FprEN 14574kSIST FprEN 14574:2015en,fr,de01-februar-2015kSIST FprEN 14574:2015SLOVENSKI
STANDARD
kSIST FprEN 14574:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 14574
November 2014 ICS 59.080.70 Will supersede EN 14574:2004English Version
Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
Géosynthétiques - Détermination de la résistance au poinçonnement pyramidal des géosynthétiques sur support Geokunststoffe - Bestimmung des Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter Unterlage This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 189.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 14574:2014 EkSIST FprEN 14574:2015
FprEN 14574:2014 (E) 2 Contents Page
Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus . 4 5.1 Test configuration . 4 5.2 Underlying aluminium medium . 5 5.3 Loading piston . 5 5.4 Electrical equipment for the determination of the push-through load . 6 6 Specimens . 6 6.1 Sampling . 6 6.2 Number and dimension of specimens . 6 7 Conditioning . 6 8 Procedure . 7 9 Calculation and expression of test results . 7 10 Test report . 7
kSIST FprEN 14574:2015
FprEN 14574:2014 (E) 3 Foreword This document (FprEN 14574:2014) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This document is currently submitted to the Formal Vote. This document will supersede EN 14574:2004. This document has been prepared
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.