SIST EN 14574:2005

Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics

This document specifies an index test method to determine the puncture resistance of a geosynthetic on a rigid support.
This method simulates the efficiency of a geosynthetic protecting a geosynthetic barrier material or an other contact surface against sharp rigid elements under short term loading.
Annex A (informative) specifies a test method which could be applicable to a soft support.

Geokunststoffe - Bestimmung der Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter Unterlage

Dieses Dokument legt ein Index-Prüfverfahren zur Bestimmung des Durchdrückwiderstandes eines Geokunst-
stoffes auf einer harten Unterlage fest.
Dieses Verfahren simuliert die Wirksamkeit eines Geokunststoffes in seiner Funktion als Schutz einer
geosynthetischen Dichtungsbahn oder einer sonstigen Berührungsfläche gegen scharfe starre Gegenstände unter
kurzzeitiger Belastung.
Anhang A (informativ) legt ein Prüfverfahren fest, das für eine weiche Unterlage angewendet werden kann.

Géosynthétiques - Détermination de la résistance au poinçonnement pyramidal de géosynthétiques sur support

Le présent document  décrit une méthode d'essai de référence pour la détermination de la résistance au poinçonnement pyramidal d'un géosynthétique sur support rigide.
Cette méthode permet, par simulation, d'évaluer l'efficacité d'un géosynthétique a protéger une géomembrane ou toute autre surface de contact contre les éléments rigides et tranchants  sous une charge a court terme.
L'annexe A (informative) une méthode d'essai pouvant s'appliquer sur support souple.

Geosintetika – Ugotavljanje prebodne odpornosti podporne geosintetike proti preluknjanju s piramidnim bodalom

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2005
• Withdrawal Date: 19-Apr-2015
• ICS: 59.080.70 - Geotextiles
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 20-Apr-2015
• Due Date: 13-May-2015
• Completion Date: 20-Apr-2015
• Ref Project: EN 14574:2004 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics

Relations

• Replaced By: SIST EN 14574:2015 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
• Effective Date: 01-Jun-2015
• Replaced By: SIST EN 14574:2015 - Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosintetika – Ugotavljanje prebodne odpornosti podporne geosintetike proti preluknjanju s piramidnim bodalomGeokunststoffe - Bestimmung der Pyramidendurchdrückwiderstandes von Geokunststoffen auf harter UnterlageGéosynthétiques - Détermination de la résistance au poinçonnement pyramidal de géosynthétiques sur supportGeosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 14574:2004SIST EN 14574:2005en01-marec-2005SIST EN 14574:2005SLOVENSKI
STANDARD



SIST EN 14574:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14574December 2004ICS 59.080.70English versionGeosynthetics - Determination of the pyramid punctureresistance of supported geosyntheticsGéosynthétiques - Détermination de la résistance aupoinçonnement pyramidal de géosynthétiques sur supportGeokunststoffe - Bestimmung derPyramidendurchdrückwiderstandes von Geokunststoffenauf harter UnterlageThis European Standard was approved by CEN on 15 November 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14574:2004: ESIST EN 14574:2005



EN 14574:2004 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.5 5 Apparatus.5 5.1 Test configuration (see Figure 1).5 5.2 Underlying aluminium medium.5 5.3 Loading piston (see Figure 2).5 5.4 Electrical equipment for the determination of the push-through load.5 6 Specimens.5 6.1 Sampling.5 6.2 Number and dimension of specimens.5 7 Conditioning.5 8 Procedure.6 9 Calculation and expression of test results.6 10 Test Report.6 Annex A (informative)
Test method on a soft support.8
SIST EN 14574:2005



EN 14574:2004 (E) 3 Foreword This document (EN 14574:2004) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14574:2005



EN 14574:2004 (E) 4 1 Scope This document specifies an index test method to determine the puncture resistance of a geosynthetic on a rigid support.
This method simulates the efficiency of a geosynthetic protecting a geosynthetic barrier material or an other contact surface against sharp rigid elements under short term loading. Annex A (informative) specifies a test method which could be applicable to a soft support. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 485-2 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties EN 963 Geotextiles and geotextile-related products - Sampling and preparation of test specimens EN ISO 845 Cellular plastics and rubbers - Determination of apparent (bulk) density (ISO 845:1988) EN ISO 10320 Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) EN ISO 12236 Geotextiles and geotextile-related products – Static puncture test (CBR-Test) (ISO 12236:1996) EN ISO 3386-1 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials (ISO 3386-1:1986) EN ISO 7500-1 Metallic materials - Verification of static uniaxial testing mach
...