Railway applications - Track - Switches and crossings for Vignole rails - Part 2: Requirements for geometric design

The same as for EN 13232-2:2003+A1:2011.

Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 2: Anforderungen an den geometrischen Entwurf

Der vorliegende Teil dieser Europäischen Norm umfasst folgende Themenbereiche:
-   die Beschreibung des Konstruktionsprozesses von Weichen und Kreuzungen sowie die Anwendung der anderen Teile dieser Norm;
-   die geometrischen Konstruktionsgrundsätze für die Radführung;
-   die Festlegung des wesentlichen Lieferumfangs;
-   die auftretenden Kräfte und ihr entsprechendes Abfangen;
-   Toleranzgrenzen.
Diese werden in dieser Norm anhand einer Weiche dargestellt. Die wesentlichen Bauteile von Weichen und Kreuzungen sind in Weichen enthalten und die Grundsätze, die für Weichen angewandt werden, sind gleichermaßen auf umfangreichere Weichenanlagen anwendbar.

Applications ferroviaires - Voie - Appareils de voie - Partie 2: Exigences de la conception géométrique

Cette partie de l’EN 13232 couvre les sujets suivants :
-   description du processus de conception des appareils de voie, ainsi que de l’utilisation des autres parties de la présente norme ;
-   principes de conception géométrique pour le guidage des roues ;
-   définition des limites essentielles pour la fourniture ;
-   forces appliquées et leur support adéquat ;
-   niveaux des tolérances.
Ces sujets sont illustrés par des applications à un branchement. Les principaux composants des appareils de voie sont représentés dans des branchements. Les principes appliqués dans les branchements sont également applicables dans les assemblages plus complexes.

Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice - 2. del: Geometrijske zahteve pri načrtovanju

General Information

Status
Not Published
Public Enquiry End Date
17-Aug-2014
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
27-Jan-2020
Due Date
01-Feb-2020
Completion Date
27-Jan-2020

Relations

Buy Standard

Draft
prEN 13232-2:2014
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13232-2:2014
01-julij-2014
äHOH]QLãNHQDSUDYH=JRUQMLXVWURMSURJH.UHWQLFHLQNULåLãþD]D9LJQRORYHWLUQLFH
GHO*HRPHWULMVNH]DKWHYHSULQDþUWRYDQMX
Railway applications - Track - Switches and crossings for Vignole rails - Part 2:
Requirements for geometric design
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 2:
Anforderungen an den geometrischen Entwurf
Applications ferroviaires - Voie - Appareils de voie - Partie 2: Exigences de la conception
géométrique
Ta slovenski standard je istoveten z: prEN 13232-2 rev
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
93.100 Gradnja železnic Construction of railways
oSIST prEN 13232-2:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13232-2:2014

---------------------- Page: 2 ----------------------
oSIST prEN 13232-2:2014

EUROPEAN STANDARD
DRAFT
prEN 13232-2 rev
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2014
ICS 93.100 Will supersede EN 13232-2:2003+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 2: Requirements for geometric design
Applications ferroviaires - Voie - Appareils de voie - Partie Bahnanwendungen - Oberbau - Weichen und Kreuzungen
2: Exigences de la conception géométrique für Vignolschienen - Teil 2: Anforderungen an den
geometrischen Entwurf
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13232-2 rev:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13232-2:2014
prEN 13232-2:2014 (E)
Contents
Page
Foreword .4
1 Scope .5
2 Normative references .5
3 General design process .5
3.1 General process .5
3.2 Design step details .6
3.3 Practical use of the design process .6
4 General Design (step 1) .7
4.1 Introduction .7
4.2 General requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.