SIST EN ISO 12312-1:2022/A1:2027
(Amendment)Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use - Amendment 1 (ISO 12312-1:2022/Amd 1:2026)
- Status
- Not Published
- Public Enquiry End Date
- 15-May-2025
- Technical Committee
- OVP - Personal protecting equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 28-Oct-2026
- Due Date
- 02-Jan-2027
SIST EN ISO 12312-1:2022/A1:2027 is Amendment 1 to the standard for sunglasses and related eyewear for general use. It updates the ISO 12312-1:2022 requirements for testing, uniformity, robustness, labelling and electro-optical filter behaviour, so it is used by manufacturers, test laboratories and conformity assessors working with sunglasses for everyday wear.
What does SIST EN ISO 12312-1:2022/A1:2027 specify?
SIST EN ISO 12312-1:2022/A1:2027 amends the requirements for sunglasses for general use in ISO 12312-1:2022. It focuses on how sunglasses are tested, what information accompanies them, and how special filter types such as polarizing, gradient and electro-optical filters are treated.
The amendment is organized around changes to Clauses 2, 4.4, 5.1, 5.3, 6.3, 7.1 to 7.6, 11.1, 12.1 and 12.2, plus Annexes B and C. In practice, that means readers should use it together with the base part because it updates selected technical points rather than restating the whole standard.
What are the key requirements of SIST EN ISO 12312-1:2022/A1:2027?
SIST EN ISO 12312-1:2022/A1:2027 strengthens how sunglasses are tested and described, especially where optical performance and safety depend on the filter type. The amendment also aligns several clauses with ISO 18526 and ISO 12311 test methods.
Test methods and measurement direction
Clause 5.1 now sends users to ISO 18526-2:2020 for transmittance measurements, and it states that if the direction is not specified, measurement is normal to the surface at the geometrical centre. For users, this matters because the same sample must be measured in a defined way so results can be compared across laboratories.
Headforms and “as-worn” testing
Clause 4.4 sets default headforms from ISO 18526-4:2020 when the manufacturer has not specified compatible headforms. Clause 6.3 also requires prism imbalance to be checked on the complete sunglass in the “as-worn” position according to ISO 18526-1:2020. This ensures the product is assessed in a realistic wearing position, not only as loose parts.
Uniformity and special filter types
Clause 5.3.1 clarifies visual and measured uniformity for uniformly tinted and gradient filters, including limits on variation within the reference area and, for mounted filters, differences between left and right eyes. Clause 5.3.4.2 requires polarizing claims to be tested to ISO 18526-2:2020, Clause 15. In practice, manufacturers need to control tint consistency and be able to support any claim that the filter is polarizing.
Robustness and endurance
Clauses 7.1 to 7.6 update several robustness checks, including filter fracture, frame deformation, impact resistance, increased endurance and resistance to perspiration. The amendment also clarifies when a filter is considered fractured and how residual frame deformation is judged. This is important for durability claims and for deciding whether a sunglass can withstand normal handling and wear.
Labelling and user information
Clause 12.1 requires the filter category to be described using the internationally agreed symbol and/or a verbal description. Clause 12.2 adds the verbal description of the symbols. For the user, this means the product information should make the filter category understandable without needing to interpret the standard itself.
Annexes B and C
Annex B adds material on photosensitive seizures and electro-optical filters, including a note that such filters are not for use by individuals susceptible to photosensitive seizures. Annex C updates information and labelling for uncut and/or unmounted replacement filters. These annexes help users and manufacturers handle special risks and product forms that need extra explanation.
What terms does SIST EN ISO 12312-1:2022/A1:2027 define?
- Luminous transmittance - The amount of visible light that passes through a sunglass filter; it is central to tint category and visual performance.
- Gradient filter - A filter whose transmittance changes across its area; the amendment sets specific expectations for its uniformity.
- Headform - A test form used to mount or position sunglasses during testing so the product is evaluated in a wearing-like condition.
- Prism imbalance - A left-right difference in prismatic effect that can affect visual comfort and alignment when wearing sunglasses.
- Electro-optical filter - A filter that changes its optical state electronically; Annex B addresses its behaviour and special risks.
- Photosensitive seizures - Seizures that can be provoked by visual stimuli; Annex B links this risk to electro-optical filter use.
- Filter category - The class used to describe the intended light transmission and use of the sunglass filter.
Who uses SIST EN ISO 12312-1:2022/A1:2027?
SIST EN ISO 12312-1:2022/A1:2027 is used by sunglasses manufacturers, component suppliers, test laboratories, certification bodies and quality managers. It is also relevant to buyers and regulators who need to check that sunglasses for general use are described, tested and labelled in a consistent way.
What changed in SIST EN ISO 12312-1:2022/A1:2027 from the previous edition?
SIST EN ISO 12312-1:2022/A1:2027 is Amendment 1 to ISO 12312-1:2022. It updates the normative reference for test methods to ISO 12311:2023 and revises several clauses on headforms, transmittance, uniformity, prism imbalance, robustness, endurance, perspiration resistance, coverage area, information to be supplied, and annex material on photosensitive seizures and replacement filters.
Which standards are used with SIST EN ISO 12312-1:2022/A1:2027?
- ISO 12311:2023 - Provides the test methods now cited for sunglasses and related eyewear.
- ISO 18526-1:2020 - Provides the “as-worn” test position used for prism imbalance.
- ISO 18526-2:2020 - Provides the measurement clauses used for transmittance, polarizing filters, calculations and reaction-time-related testing.
- ISO 18526-3:2020 - Provides inspection and test guidance used for visual uniformity and some impact-related checks.
- ISO 18526-4:2020 - Provides the headforms used when selecting the default test headforms.
- ISO 9241-391:2016 - Is referenced in Annex B for photosensitive seizure considerations.
What does the SIST EN ISO 12312-1:2022/A1:2027 document contain?
The document contains amendment text that replaces or adds requirements in selected clauses and annexes of ISO 12312-1:2022. It includes revised test method references, changed acceptance language for uniformity and fracture, and updated user information and labelling requirements.
It also adds explanatory material for electro-optical filters, including a schematic apparatus figure for reaction time testing in Annex B. Annex C updates how uncut and/or unmounted replacement filters are identified and labelled, including the description of nominal base curve for uncut filters.
For testing and conformity work, the document is mainly a change set: users apply the amended clauses together with the base standard to design, verify, test and document sunglasses for general use.
Relations
- Effective Date
- 14-Aug-2024
Get Certified
Connect with accredited certification bodies for this standard

BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.

TÜV Rheinland
TÜV Rheinland is a leading international provider of technical services.

TÜV SÜD
TÜV SÜD is a trusted partner of choice for safety, security and sustainability solutions.
Sponsored listings
Frequently Asked Questions
SIST EN ISO 12312-1:2022/A1:2027 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use - Amendment 1 (ISO 12312-1:2022/Amd 1:2026)". This standard covers: Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use - Amendment 1 (ISO 12312-1:2022/Amd 1:2026)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use - Amendment 1 (ISO 12312-1:2022/Amd 1:2026)
SIST EN ISO 12312-1:2022/A1:2027 is classified under the following ICS (International Classification for Standards) categories: 11.040.70 - Ophthalmic equipment; 13.340.20 - Head protective equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 12312-1:2022/A1:2027 has the following relationships with other standards: It is inter standard links to SIST EN ISO 12312-1:2022. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 12312-1:2022/A1:2027 is associated with the following European legislation: EU Directives/Regulations: 2016/425; Standardization Mandates: M/571, M/571 Amd 1, M/571 Amd 2. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN ISO 12312-1:2022/A1:2027 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12312-1:2022/oprA1:2025
01-maj-2025
Varovanje oči in obraza - Sončna očala in sorodna oprema za varovanje oči - 1.
del: Sončna očala za splošno uporabo - Dopolnilo A1 (ISO 12312-1:2022/DAM
1:2025)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for
general use - Amendment 1 (ISO 12312-1:2022/DAM 1:2025)
Protection des yeux et du visage - Lunettes de soleil et articles de lunetterie associés -
Partie 1: Lunettes de soleil pour usage général - Amendement 1 (ISO 12312-
1:2022/DAM 1:2025)
Ta slovenski standard je istoveten z: EN ISO 12312-1:2022/prA1
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN ISO 12312-1:2022/oprA1:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 12312-1:2022/oprA1:2025
SIST EN ISO 12312-1:2022/oprA1:2025
DRAFT
Amendment
ISO 12312-1:2022/
DAM 1
ISO/TC 94/SC 6
Eye and face protection —
Secretariat: BSI
Sunglasses and related eyewear —
Voting begins on:
Part 1:
2025-02-24
Sunglasses for general use
Voting terminates on:
2025-05-19
AMENDMENT 1
Protection des yeux et du visage — Lunettes de soleil et articles
de lunetterie associés —
Partie 1: Lunettes de soleil pour usage général
AMENDEMENT 1
ICS: 13.340.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 12312-1:2022/DAM 1:2025(en)
SIST EN ISO 12312-1:2022/oprA1:2025
DRAFT
ISO 12312-1:2022/DAM 1:2025(en)
Amendment
ISO 12312-1:2022/
DAM 1
ISO/TC 94/SC 6
Eye and face protection —
Secretariat: BSI
Sunglasses and related eyewear —
Voting begins on:
Part 1:
Sunglasses for general use
Voting terminates on:
AMENDMENT 1
Protection des yeux et du visage — Lunettes de soleil et articles
de lunetterie associés —
Partie 1: Lunettes de soleil pour usage général
AMENDEMENT 1
ICS: 13.340.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO 12312-1:2022/DAM 1:2025(en)
ii
SIST EN ISO 12312-1:2022/oprA1:2025
ISO 12312-1:2022/DAM 1:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 12312-1:2022 was prepared by Technical Committee ISO/TC 94, Personal safety -
protective clothing and equipment, Subcommittee SC 6, and by Technical Committee CEN/TC 85, Eye protective
equipment in collaboration.
iii
SIST EN ISO 12312-1:2022/oprA1:2025
SIST EN ISO 12312-1:2022/oprA1:2025
ISO 12312-1:2022/DAM 1:2025(en)
Eye and face protection — Sunglasses and related eyewear —
Part 1:
Sunglasses for general use
AMENDMENT 1
2 Normative references
Delete paragraph 5 and substitute by the following:
“ISO 12311:2023, Personal protective equipment — Test methods for sunglasses and related eyewear”
4.4 Headforms
Delete the existing text and substitute by the following:
"Unless the manufacturer specifies the headform(s) in accordance with ISO 18526-4:2020 that is/
are compatible with the sunglasses, the test methods where (a) headform(s) is/are required shall use
the headform 1-M for adult's sunglasses and (1-C6) or (1-C12) for children's sunglasses as specified in
ISO 18526-4:2020 as the default”
5.1 Test methods
Delete the first paragraph and substitute by the following:
“Transmittance values shall be determined in accordance with ISO 18526-2:2020, Clauses 7, 8, 9 and 10. If
the direction of measurement is not specified, then the direction of measurement shall be normal to the
surface of the test sample at its geometrical centre.”
5.3.1 Uniformity of luminous transmittance
Delete the existing text and substitute by:
“Filters that are intended to be uniformly tinted shall appear to be visually uniform within a circle
(30 ± 1) mm diameter centred on the reference points and appear to have the same transmittance at the
two reference points when inspected against a white background in accordance with ISO 18526-3:2020, 6.6.
For gradient filters the luminous transmittances shall appear constant in the horizontal direction and have
equal transmittance at the reference points.
Where there is visible non-uniformity, or tilt in case of gradient filters, then, when tested according to
ISO 18526-2:2020, 7.4, the relative difference in the luminous transmittance value between any two points
of the filter within a circle (30 ± 1) mm in diameter centred on the reference point shall not be greater than
15 % (relative to the higher value), except for category 4 where it shall not be greater than 20 %. If a 5 mm
wide portion around the edge of the test sample intrudes into this circular area, then this intrusion shall be
excluded from testing.
The geometric or boxed centre takes the place of the reference point if this is not known.
SIST EN I
...



