iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 12311:2024

(Main)

Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2023)

Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2023)

This document specifies reference's test methods for determining the properties of sunglasses given in
ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods can be used if proven to be equivalent.

Persönliche Schutzausrüstung - Prüfverfahren für Sonnenbrillen und ähnlichen Augenschutz (ISO 12311:2023)

Diese Internationale Norm legt Referenzprüfverfahren für die Bestimmung der in ISO 12312 (alle Teile) angegebenen Eigenschaften von Sonnenbrillen fest. Sie ist auf alle Sonnenbrillen und ähnlichen Augenschutz anwendbar.
Andere Prüfverfahren dürfen angewendet werden, sofern ihre Gleichwertigkeit nachgewiesen ist.

Équipement de protection individuelle - Méthodes d'essai pour lunettes de soleil et articles de lunetterie associés (ISO 12311:2023)

Le présent document spécifie les méthodes d’essai de référence permettant de déterminer les propriétés des lunettes de soleil indiquées dans l’ISO 12312 (toutes les parties). Il s’applique à toutes les lunettes de soleil et aux articles de lunetterie associés.
D’autres méthodes d’essai peuvent être utilisées s’il est démontré qu’elles sont équivalentes.

Osebna varovalna oprema - Preskusne metode za sončna očala in podobno opremo (ISO 12311:2023)

Ta dokument določa referenčne preskusne metode za ugotavljanje lastnosti sončnih očal iz standarda ISO 12312 (vsi deli). Uporablja se za vsa sončna očala in podobna očala.
Uporabljajo se lahko druge preskusne metode, če so dokazano enakovredne.

General Information

Status
Published
Public Enquiry End Date
30-Jan-2022
Publication Date
12-Feb-2024
ICS
11.040.70 - Ophthalmic equipment
13.340.20 - Head protective equipment
Technical Committee
OVP - Personal protecting equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Jan-2024
Due Date
30-Mar-2024
Completion Date
13-Feb-2024
Ref Project
EN ISO 12311:2023 - Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2023)

Relations

Replaces
SIST EN ISO 12311:2013 - Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15)
Effective Date
01-Mar-2024

Buy Standard

EN ISO 12311:2024EN ISO 12311:2024
PreviousNext
Standard
EN ISO 12311:2024
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12311:2024
01-marec-2024
Nadomešča:
SIST EN ISO 12311:2013
Osebna varovalna oprema - Preskusne metode za sončna očala in podobno
opremo (ISO 12311:2023)
Personal protective equipment - Test methods for sunglasses and related eyewear (ISO
12311:2023)
Persönliche Schutzausrüstung - Prüfverfahren für Sonnenbrillen und ähnlichen
Augenschutz (ISO 12311:2023)
Équipement de protection individuelle - Méthodes d'essai pour lunettes de soleil et
articles de lunetterie associés (ISO 12311:2023)
Ta slovenski standard je istoveten z: EN ISO 12311:2023
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN ISO 12311:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12311:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 12311:2024


EN ISO 12311
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2023
EUROPÄISCHE NORM
ICS 13.340.20 Supersedes EN ISO 12311:2013
English Version

Personal protective equipment - Test methods for
sunglasses and related eyewear (ISO 12311:2023)
Équipement de protection individuelle - Méthodes Persönliche Schutzausrüstung - Prüfverfahren für
d'essai pour lunettes de soleil et articles de lunetterie Sonnenbrillen und ähnlichen Augenschutz (ISO
associés (ISO 12311:2023) 12311:2023)
This European Standard was approved by CEN on 10 December 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12311:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 12311:2024
EN ISO 12311:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 12311:2024
EN ISO 12311:2023 (E)
European foreword
This document (EN ISO 12311:2023) has been prepared by Technical Committee ISO/TC 94 "Personal
safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC 85 “Eye
protective equipment” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2024, and conflicting national standards shall be
withdrawn at the latest by June 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12311:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12311:2023 has been approved by CEN as EN ISO 12311:2023 without any modification.


3

---
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 12312-1:2022(Main)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
EN ISO 12312-1:2022

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including
road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used
as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar
eclipse, for which ISO 12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO 16321 (all parts)

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12312-2:2015(Main)
Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
EN ISO 12312-2:2015

The standard applies to all afocal (plano power) products intended for direct observation of the Sun, such as solar eclipse viewing. This standard does not apply to:
-afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation
- eyewear for protection against radiation from artificial light sources, such as those used in solaria
- eye protectors specifically intended for sports, for which separate standards are available (e.g. ski goggles or other types)
- sunglasses that have been medically prescript for attenuating solar radiation

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12312-1:2022(Main)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
EN ISO 12312-1:2022

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including
road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used
as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar
eclipse, for which ISO 12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO 16321 (all parts)

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12312-2:2015(Main)
Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
EN ISO 12312-2:2015

The standard applies to all afocal (plano power) products intended for direct observation of the Sun, such as solar eclipse viewing. This standard does not apply to:
-afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation
- eyewear for protection against radiation from artificial light sources, such as those used in solaria
- eye protectors specifically intended for sports, for which separate standards are available (e.g. ski goggles or other types)
- sunglasses that have been medically prescript for attenuating solar radiation

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 45545-3:2024

This part of EN 45545 specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this part of EN 45545, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this part of EN 45545. It is not within the scope of this part of EN 45545 to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CEN/CLC Guide 25:2024(Main)
The concept of Cooperation with European Organizations and other stakeholders
CEN/CLC Guide 25:2024
  • Guide
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-716:2024(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations - ELV DC power distribution over information and communications technology (ICT) cable infrastructure (IEC 60364-7-716:2023)
HD 60364-7-716:2023

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61970-302:2024(Main)
Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) dynamics (IEC 61970-302:2024)
EN IEC 61970-302:2024

IEC 61970-302:2024 specifies a Dynamics package which contains part of the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability) or transient stability of a power system as defined by IEEE / CIGRE, Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions.
The model descriptions in this document provide specifications for each type of dynamic model as well as the information that needs to be included in dynamic case exchanges between planning/study applications.
The scope of the CIM Dynamics package specified in this document includes:
• standard models: a simplified approach to describing dynamic models, where models representing dynamic behaviour of elements of the power system are contained in predefined libraries of classes which are interconnected in a standard manner. Only the names of the selected elements of the models along with their attributes are needed to describe dynamic behaviour.
• proprietary user-defined models: an approach providing users the ability to define the parameters of a dynamic behaviour model representing a vendor or user proprietary device where an explicit description of the model is not provided by this document. The same libraries and standard interconnections are used for both proprietary user-defined models and standard models. The behavioural details of the model are not documented in this document, only the model parameters.
• A model to enable exchange of models’ descriptions. This approach can be used to describe user defined and standard models.
• A model to enable exchange of simulation results.
This second edition cancels and replaces the first edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The majority of issues detected in IEC 61970-302:2018 are addressed;
b) IEEE 421.5-2016 on Excitation systems is fully covered;
c) The IEEE turbine report from 2013 was considered and as a result a number of gas, steam and hydro turbines/governors are added;
d) IEC 61400-27-1:2020 on wind turbines is fully incorporated;
e) WECC Inverter-Based Resource (IBR) models, Hybrid STATCOM models and storage models are added;
f) The user defined models are enhanced with a model which enables modelling of detailed dynamic model;
g) A model to enable exchange of simulation results is added;
h) The work on the HVDC models is not complete. The HVDC dynamics models are a complex domain in which there are no models that are approved or widely recognised on international level, i.e. there are only project-based models. At this stage IEC 61970-302:2022 only specifies some general classes. However, it is recognised that better coverage of HVDC will require a further edition of this document;
i) Models from IEEE 1547-2018 "IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces" are added.
j) Statements have been added to certain figures, tables, schemas, and enumerations throughout the document that indicate that they are reproduced with the permission of the UCA International User Group (UCAIug). These items are derived from the CIM.

  • Standard
    894 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-2-23:2024(Main)
Optical fibre cables - Part 2-23: Indoor cables - Detail specification for multi-fibre cables for use in MPO connector terminated cable assemblies (IEC 60794-2-23:2024)
EN IEC 60794-2-23:2024

IEC 60794-2-23: 2024 is a detail specification and specifies indoor multi-fibre cables for use in MPO (multi-fibre push on) connector terminated cable assemblies.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-1-311:2024(Main)
Optical fibre cables - Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, Method G11A (IEC 60794-1-311:2024)
EN IEC 60794-1-311:2024

IEC 60794-1-311:2024 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property – tensile strength and elongation at break. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.
This document partially cancels and replaces IEC 60794-1-23:2019. This edition includes the following significant technical changes with respect to IEC 60794‑1‑23:2019:
a) The information about dumb-bells is removed because this is not used for testing cable elements;
b) the parameters strain at yield and E modulus are added in 5.7.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day