iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50262:1999

(Main)

Cable glands for electrical installations

Cable glands for electrical installations

This European standard provides requirements and tests for the construction and performance of metric cable glands. This standard covers complete glands as supplied by the manufacturer or supplier, but not parts of cable glands. Requirements and tests for metric cable glands with multi-orifice seals are under consideration. This standard does not cover cable glands: for fibre optic cables; for mineral insulated cables specified in HD 586: with a gland entry portion other than metric. NOTE: Certain cable glands may also be used in 'Hazardous Areas'. Regard should then be taken of other or additional requirements necessary for equipment to be installed in such conditions, for example as specified in EN 50014

Kabelverschraubungen für elektrische Installationen

Presse-étoupe pour installations électriques

Kabelske kite za električne inštalacije (vsebuje popravek AC:1998)

General Information

Status
Withdrawn
Publication Date
31-Oct-1999
Withdrawal Date
11-Oct-2016
ICS
29.080.20 - Bushings
Technical Committee
IEKA - Electric cables
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Oct-2016
Due Date
04-Nov-2016
Completion Date
12-Oct-2016
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 50262:1998 - Cable glands for electrical installations

Relations

Amended By
SIST EN 50262:1999/A2:2005 - Cable glands for electrical installations
Effective Date
29-Jan-2023
Amended By
SIST EN 50262:1999/A1:2002 - Cable glands for electrical installations
Effective Date
29-Jan-2023
Revised
SIST EN 62444:2013 - Cable glands for electrical installations (IEC 62444:2010, modified)
Effective Date
06-May-2014
Amended By
SIST EN 50262:1999/A1:2002 - Cable glands for electrical installations
Effective Date
07-Jun-2022
Amended By
SIST EN 50262:1999/A2:2005 - Cable glands for electrical installations
Effective Date
07-Jun-2022
Replaced By
SIST EN 62444:2013 - Cable glands for electrical installations (IEC 62444:2010, modified)
Effective Date
07-Jun-2022
Amended By
SIST EN 50262:1999/A1:2002 - Cable glands for electrical installations
Effective Date
01-Apr-2002
Replaced By
SIST EN 62444:2013 - Cable glands for electrical installations (IEC 62444:2010, modified)
Effective Date
29-Jan-2013
Amended By
SIST EN 50262:1999/A2:2005 - Cable glands for electrical installations
Effective Date
01-Apr-2005

Buy Standard

EN 50262:1999EN 50262:1999
PreviousNext
Standard
EN 50262:1999
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50262:1999
01-november-1999
.DEHOVNHNLWH]DHOHNWULþQHLQãWDODFLMH YVHEXMHSRSUDYHN$&
Cable glands for electrical installations
Kabelverschraubungen für elektrische Installationen
Presse-étoupe pour installations électriques
Ta slovenski standard je istoveten z: EN 50262:1998
ICS:
29.080.20 Skoznjiki Bushings
SIST EN 50262:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50262:1999

---------------------- Page: 2 ----------------------

SIST EN 50262:1999

---------------------- Page: 3 ----------------------

SIST EN 50262:1999

---------------------- Page: 4 ----------------------

SIST EN 50262:1999

---------------------- Page: 5 ----------------------

SIST EN 50262:1999

---------------------- Page: 6 ----------------------

SIST EN 50262:1999

---------------------- Page: 7 ----------------------

SIST EN 50262:1999

---------------------- Page: 8 ----------------------

SIST EN 50262:1999

---------------------- Page: 9 ----------------------

SIST EN 50262:1999

---------------------- Page: 10 ----------------------

SIST EN 50262:1999

---------------------- Page: 11
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50243:2022(Main)
Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers
EN 50243:2022

This document is applicable to ceramic insulated outdoor bushings for highest voltages for equipment of 24 kV and 36 kV, with rated currents of 5 kA and 8 kA for insulating liquid filled transformers and frequencies from 15 Hz up to 60 Hz.
This document establishes dimensions to ensure interchangeability and adequate mounting of bushings.
Two types of construction are specified, type A and type B, both types for highest voltages for equipment 24 kV and 36 kV and rated currents of 5 kA and 8 kA. The mechanical stresses of the conductor tube define the difference between type A and type B. The conductor tube of type A is axially and radially fixed in the top of the bushing. The inner line terminal of the transformer can be flexible and without any special support for the lower end of the conductor tube.
For new installations bushings of Type A are expected to be used. Type B bushings can be supplied at the request of a customer.
In case of type B, the conductor tube is only radially fixed in the top of the bushing. In that case, a rigid support is mounted to fix the lower end of the conductor tube (for example, in combination with a drip proofed sealing end). The drip proofed sealing end is often required in the service requirements. In this case, it is not possible to use type A because of the existing double fixation. Therefore, both bushing types A and B are be specified.
The condition for the usage of type B is that the drip-proof sealing end is able to withstand the mechanical stress in axial direction.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50336:2022(Main)
Bushings for transformers and reactor cable boxes not exceeding 36 kV
EN 50336:2021

This document is applicable to insulated bushings, excluding those plug-in bushings specified by EN 50180 series, for use in air insulated, shroud insulated and fully insulated cable boxes for liquid filled transformers and reactors for rated voltages up to 36 kV, and rated currents up to 4 000 A at frequencies from 15 Hz to 60 Hz.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC/IEEE 65700:2018/AC:2019(Corrigendum)
Bushings for DC application
EN IEC/IEEE 65700-19-03:2018/AC:2019-03

CCMC - wrong standard reference to be corrected

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50673:2019(Main)
Plug-in type bushings for 72,5 kV with 630 A and 1 250 A for electrical equipment
EN 50673:2019

This document is applicable to plug-in type bushings, according to EN 60137, 72,5 kV, rated currents
from 630 A up to 1 250 A and frequencies from 15 Hz up to 60 Hz for single or three-phase arrangements in electrical equipment like liquid filled transformers or gas insulated switchgear and controlgear. It complements and amends, if necessary, the relevant EN standards.
The application of such plug-in type bushings is derived from EN 50180 and EN 50181 but applied for higher voltages with described deviations to EN 50299-2 and EN 62271-209.
This standard does not cover the connection assembly as described in EN 50299-2 and EN 62271-209.
EN 60137 and HD 632 series outline the qualification, type test, routine and sample test of plug-in type bushings according to this standard.
This document establishes essential dimensions and testing procedures, to ensure adequate mounting and interchangeability of mating plug-in separable connectors of equivalent ratings.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60137:2018/AC:2018(Corrigendum)
Insulated bushings for alternating voltages above 1 000 V
EN 60137:2017/AC:2018-08

IEC - Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC/IEEE 5700:2018(Main)
Bushings for DC application
EN IEC/IEEE 65700-19-03:2018

This International Standard applies to outdoor and indoor bushings of any voltage used on DC
systems, of capacitance graded or gas insulated types for use as components of oil-filled
converter transformers and smoothing reactors, as well as air-to-air DC bushings. This
standard does not apply to the following:
• cable terminations (potheads);
• bushings for instrument transformers;
• bushings for test power supplies;
• bushings applied with gaseous insulation (other than air at atmospheric pressure) external
to the bushing;
• bushings for industrial application;
• bushings for traction application;
• bushings for distribution class transformers.
This standard makes reference to IEC 60137 for general terms and conditions and defines the
special terms used, operating conditions, ratings, test procedures as well as general
mechanical and electrical requirements for bushings for DC application.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60137:2018(Main)
Insulated bushings for alternating voltages above 1 000 V
EN 60137:2017

This International Standard specifies the characteristics and tests for insulated bushings.
This standard is applicable to bushings, as defined in Clause 3, intended for use in electrical
apparatus, machinery, transformers, switchgear and installations for three-phase alternating
current systems, having highest voltage for equipment above 1 000 V and power frequencies
of 15 Hz up to and including 60 Hz.
Subject to special agreement between purchaser and supplier, this standard may be applied,
in part or as a whole, to the following:
• bushings used in other than three-phase systems;
• bushings for high-voltage direct current systems;
• bushings for testing transformers;
• bushings for capacitors.
Special requirements and tests for transformer bushings in this standard apply also to reactor
bushings.
This standard is applicable to bushings made and sold separately. Bushings which are a part
of an apparatus and which cannot be tested according to this standard should be tested with
the apparatus of which they form part.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50180-3:2016/A1:2018(Amendment)
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
EN 50180-3:2015/A1:2017

Integrate the not accepted changes of the work of WG1 proposed in the meeting on 23th October 2014 in EN50180-3

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50180-3:2016(Main)
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
EN 50180-3:2015

This European Standard should be considered in factual context with EN 50180-1 only. Constructional details
for fastenings and their details are supplementing EN 50180-1. This information is of importance for utilities
concerning compatibility.
For a better understanding of additional information some dimension from EN 50180-1 are repeated in this
European Standard.
This European Standard was extended for fastenings of bushings for a highest voltage of 52 kV.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50180-1:2016(Main)
Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 1: General requirements for bushings
EN 50180-1:2015

This European Standard is applicable to ceramic and resin insulated bushings having highest voltages above 1 kV up to 52 kV, rated currents from 250 A up to 3 150 A and frequencies from 15 Hz up to 60 Hz for insulating liquid filled transformers.
This European Standard establishes essential dimensions, to ensure interchangeability of bushings and to ensure adequate mounting and interchangeability of mating plug-in separable connectors of equivalent ratings.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day