SIST EN 12930:2005
(Main)Safety requirements for cableway installations designed to carry persons - Calculations
Safety requirements for cableway installations designed to carry persons - Calculations
This European Standard specifies the safety requirements applicable for calculations for installations for passenger transportation by rope. Its requirements are to be met taking into account the various types of installations systems and their environment. This standard contains: - general requirements for calculations and their presentation, - general requirements relating to the actions to be taken into account in the calculation, of the components as a basis for the requirements of the standards.
Sicherheitsanforderungen für Seilbahnen für den Personenverkehr - Berechnungen
Dieses Dokument legt Sicherheitsanforderungen für die Berechnungen der Seilbahnen des Personenverkehrs
fest. Dabei werden die verschiedenen Seilbahnsysteme und deren Umgebung berücksichtigt.
Dieses Dokument enthält :
.allgemeine Anforderungen für Berechnungen und deren Dokumentation ;
.allgemeine Anforderungen über die Einwirkungen, die für die Berechnung der Bauteile als Grundlage zu
den Anforderungen der EN 13223, EN 13107, EN 12927 (Teil 1 bis 6) und EN 1908 zu berücksichtigen
sind ;
.Anforderungen über rechnerische Nachweise für die Seile ;
.Anforderungen über die Ermittlung der Antriebsleistung ;
.Anforderungen für die Einwirkungen der Seile und Fahrzeuge auf die Bauwerke und die Verformungen
der Bauwerke.
Dieses Dokument gilt weder für die Seilbahnen des Güterverkehrs, noch für die Schrägaufzüge.
Prescriptions de sécurité pour les installations a câbles transportant des personnes - Calculs
6
Le présent document établit les prescriptions de sécurité s'appliquant au calcul des installations de transport a
câbles destinées aux personnes. Il s'applique aux différents systemes et tient compte de leur environnement.
Le présent document comprend :
.des prescriptions générales pour les calculs et leur présentation ;
.des prescriptions générales concernant les actions qui pour le calcul des constituants, doivent etre prises
en considération pour l?application des EN 13223, EN 13107, EN 12927 (parties 1 a 6) et EN 1908 ;
.des prescriptions concernant la justification des câbles par le calcul ;
.des prescriptions pour le calcul de la puissance d'entraînement ;
.des prescriptions concernant les actions des câbles et des véhicules sur les ouvrages de génie civil, ainsi
que les déformations de ces ouvrages.
Il ne s'applique ni aux installations de transport a câble destinées aux marchandises, ni aux ascenseurs
inclinés.
Varnostne zahteve za žičniške naprave za prevoz oseb – Izračuni
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - CalculationsPrescriptions de sécurité pour les installations a câbles transportant des personnes - CalculsSicherheitsanforderungen für Seilbahnen für den Personenverkehr - BerechnungenTa slovenski standard je istoveten z:EN 12930:2004SIST EN 12930:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 12930:200501-januar-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12930October 2004ICS 45.100 English versionSafety requirements for cableway installations designed to carrypersons - CalculationsPrescriptions de sécurité pour les installations à câblestransportant des personnes - CalculsSicherheitsanforderungen für Seilbahnen für denPersonenverkehr - BerechnungenThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12930:2004: E
EN 12930:2004 (E) 2 Contents Page Foreword.4 1 Scope.6 2 Normative references.6 3 Terms and definitions.7 4 Symbols and abbreviations.8 5 General requirements.8 5.1 Application of the standard.8 5.2 Safety principles.9 5.2.1 General.9 5.2.2 Hazard scenarios.9 5.2.3 Safety measures.9 6 General requirements for calculations.9 6.1 General comments.9 6.2 Calculation methods.9 6.3 Presentation of calculations.10 6.4 Verification by tests.10 6.5 Actions.10 6.5.1 General.10 7 Verification by calculation for ropes.12 7.1 General.12 7.2 Actions to be taken into account for calculation of longitudinal profile and rope calculation.14 7.2.1 Self weight and weight of load.14 7.2.2 Dynamic effects.14 7.2.3 Friction coefficients.14 7.2.4 Actions due to climatic conditions.15 7.3 Tension safety factor - General.15 7.4 Track ropes.16 7.4.1 Tension forces in the ropes and sag.16 7.4.2 Tension safety factor.16 7.4.3 Bending stress.16 7.4.4 Minimum bearing forces.16 7.5 Haul and ballast ropes.18 7.5.1 Tension forces in the ropes and sag.18 7.5.2 Tension safety factor.18 7.5.3 Bending stress.18 7.5.4 Bearing safety.18 7.6 Carrying-hauling ropes of aerial ropeways.19 7.6.1 Tension forces in the ropes and sag.19 7.6.2 Tension safety factor.19 7.6.3 Bending stress.19 7.6.4 Minimum bearing forces.20 7.7 Haul ropes of draglifts.20 7.7.1 Tension forces in the rope and sag.20 7.7.2 Tension safety factor.21 7.7.3 Bending stress.21 7.7.4 Minimum bearing forces.21 7.8 Tension ropes.21
EN 12930:2004 (E) 3 7.8.1 Tension forces in the ropes.21 7.8.2 Tension safety factor.21 7.8.3 Bending stress.21 7.9 Evacuation ropes.21 7.9.1 Tension forces in the ropes, sag, bearing forces, bending stress.21 7.9.2 Envelope.21 7.9.3 Tension safety factor.22 7.10 Signal, restraint and marker ropes.22 7.10.1 Envelope.22 7.10.2 Tension safety factor.22 7.10.3 Bending stress.23 8 Load transmission to drive sheave.23 8.1 Verification of adherence.23 8.2 Permissible friction coefficients at the drive sheave.23 8.3 Load cases.24 9 Calculation of drive power.24 9.1 General.24 9.2 Continuous power with variable speed and/or tangential force.24 9.3 Continuous power with constant speed and tangential force.25 9.4 Acceleration power.25 10 Actions of ropes and carriers on support structures.25 10.1 General.25 10.2 Actions due to tension forces in the ropes.26 10.2.1 General.26 10.3 Wind forces on ropes and carriers.26 10.4 Friction forces of ropes on the support structures.26 10.5 Ice on ropes.26 10.6 Starting and braking forces.26 10.7 Dynamic effects during operation.26 10.8 Actions resulting from installation and maintenance work.26 10.9 Accidental actions.27 10.9.1 General.27 10.9.2 Braking forces.27 10.9.3 Actions due to derailment of rope onto the rope catcher.27 10.9.4 Actions due to derailment of rope onto the rope catcher arm of a compression support.27 10.9.5 Complete deropement on one side of the cableway as an accidental event.28 10.9.6 Wind on empty, non-operational carriers.28 10.9.7 Breakage of a signal cable anchored to a support structure.28 10.9.8 Other accidental actions.28 11 Deformations of supports.28 12 Technical documents for the verification of the longitudinal profile calculation.28 12.1 Funicular railways.28 12.2 Aerial ropeways.28 12.3 Draglifts.29 Annex A (informative)
A–deviations.30 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relative to cableway installations designed to carry persons.31
EN 12930:2004 (E) 4 Foreword This document (EN 12930:2004) has been prepared by Technical Committee CEN/TC 242 “Safety requirements for passenger transportation by rope”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document forms part of the standards programme approved by the CEN Technical Board on safety requirements for cableway installations designed to carry persons. This programme contains the following standards: 1) Safety requirements for cableway installations designed to carry persons — Terminology 2) Safety requirements for cableway installations designed to carry persons — General requirements 3) Safety requirements for cableway installations designed to carry persons — Calculations 4) Safety requirements for cableway installations designed to carry persons — Ropes 5) Safety requirements for cableway installations designed to carry persons — Tension devices 6) Safety requirements for cableway installations designed to carry persons — Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons — Carriers 8) Safety requirements for cableway installations designed to carry persons — Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons — Civil engineering works 10) Safety requirements for cableway installations designed to carry persons — Pre-commissioning inspection, maintenance and operational checks 11) Safety requirements for cableway installations designed to carry persons — Evacuation and rescue 12) Safety requirements for cableway installations designed to carry persons — Operation 13) Safety requirements for cableway installations designed to carry persons — Quality assurance This series of standards forms a complete set with regard to the design, production, installation, maintenance and operation of any cableway installation designed to carry persons. With regard to ski-tows, the text of this document is based on the work of the International Ropeway Organization (OITAF).
EN 12930:2004 (E) 5 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 12930:2004 (E) 6 1 Scope This document specifies the general safety requirements applicable to the calculations for cableway installations designed to carry persons. This document is applicable to the various types of installations and takes into account their environment. This document contains: general requirements for calculations and their presentation; general requirements relating to the actions to be taken into account in the calculation of components as a basis for the requirements of the standards EN 13223, EN 13107, EN 12927 (Parts 1 to 6) and EN 1908; requirements relating to verification of ropes by calculation; requirements relating to the determination of the drive power; requirements for the actions of the ropes and carriers on the support structures and for the deformations of these support structures. This document does not apply to installations for the transportation of goods nor to inclined lifts. 2 Normative references The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1709, Safety requirements for cableway installations designed to carry persons — Pre-commissioning inspection, maintenance, operational inspections and checks. prEN 1907:2004, Safety requirements for cableway installations designed to carry persons — Terminology. EN 1908, Safety requirements for cableway installations designed to carry persons — Tension devices. EN 1909, Safety requirements for cableway installations designed to carry persons — Recovery and evacuation. ENV 1991-1, Eurocode 1 — Basis of design and actions on structures — Part 1: Basis of design. ENV 1991-2-1, Eurocode 1 — Basis of design and actions on structures — Actions on structures — Part 2-1: Densities, self-weight and imposed loads. ENV 1991-2-4, Eurocode 1 — Basis of design and actions on structures — Actions on structures — Part 2-4: Wind loads. EN 12397, Safety requirements for cableway installations designed to carry persons — Operation. EN 12408, Safety requirements for cableway installations designed to carry persons — Quality assurance. EN 12927-1, Safety requirements for passenger transportation by rope — Ropes — Part 1: Selection criteria for ropes and their end fixings.
EN 12930:2004 (E) 7 EN 12927-2, Safety requirements for cableway installations designed to carry persons — Ropes — Part 2 : Safety factors. EN 12927-3, Safety requirements for cableway installations designed to carry persons
— Ropes — Part 3 : Long splicing of 6 strand hauling, carrying-hauling and towing ropes. EN 12927-4, Safety requirements for cableway installations designed to carry persons — Ropes — Part 4 : End fixings. EN 12927-5, Safety requirements for cableway installations designed to carry persons
— Ropes — Part 5 : Storage, transportation, handling and tensioning. EN 12927-6, Safety requirements for cableway installations designed to carry persons — Ropes — Part 6 : Discard criteria. EN 12927-7, Safety requirements for cableway installations designed to carry persons — Ropes — Part 7 : Inspection, repair and maintenance. EN 12927-8, Safety requirements for cableway installations designed to carry persons — Ropes — Part 8 : Magnetic rope testing (MRT). EN 12929-1, Safety requirements for cableway installations designed to carry persons — General requirements — Part 1 : Requirements for all installations. EN 12929-2, Safety requirements for cableway installations designed to carry persons — General requirements — Part 2 : Additional requirements for jig back bicable aerial ropeways without carrier truck brakes. EN 13107, Safety requirements for cableway installations designed to carry persons — Civil engineering works. EN 13223, Safety requirements for cableway installations designed to carry persons — Drive systems and other mechanical equipment. EN 13243, Safety requirements for cableway installations designed to carry persons — Electrical equipment other than for drive systems. prEN 13796-1, Safety requirements for cableway installations designed to carry persons — Carriers — Part 1 : Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers. prEN 13796-2, Safety requirements for cableway installations designed to carry persons — Carriers — Part 2 : Slipping resistance tests for grips. prEN 13796-3, Safety requirements for cableway installations designed to carry persons — Carriers — Part 3 : Fatigue testing. 3 Terms and definitions For the purposes of this document, the terms and definitions given in prEN 1907:2004 and the following apply. 3.1 rope calculation calculation of required dimensions for ropes on the basis of the tension forces determined from the calculation of the longitudinal profile
EN 12930:2004 (E) 8 3.2 calculation of longitudinal profile calculation to determine the tension forces in the rope and their actions on the rope supports and rope anchorages 3.3 empty rope track rope or carrying-hauling rope without carriers 3.4 unloaded rope track rope or carrying-hauling rope only carrying empty carriers at the required carrier pitch 3.5 loaded rope track rope or carrying-hauling rope carrying fully laden carriers at the required carrier pitch 3.6 curvature ratio ratio between either the pitch diameter of the sheave (D) and the nominal diameter of the rope (d) or the pitch radius of the shoe, saddle or roller chain (R) and the nominal diameter of the rope 3.7 angle of deflection of rope angle through which a rope is deflected, measured between the tangent to the rope at the start of the deflection and the tangent to the rope at the end of the deflection in the same plane as the deflected rope 3.8 tensile safety factor ratio between the minimum breaking load of the rope and the calculated tension force in the rope 3.9 safety component any basic component, set of components, subassembly or complete assembly of equipment and any device incorporated in the installation for the purpose of ensuring a safety function and identified by the safety analysis, the failure of which endangers the safety or health of persons, be they users, operating personnel or third parties 4 Symbols and abbreviations Symbols and abbreviations are explained with the formula to which they apply throughout this document. 5 General requirements 5.1 Application of the standard The requirements of this document apply to all installations along with those of EN 1709, EN 1908, EN 1909, EN 12397, EN 12408, EN 12927-1, EN 12927-2, EN 12927-3, EN 12927-4, EN 12927-5, EN 12927-6, EN 12927-7, EN 12927-8, EN 12929-1, EN 12929-2, EN 13107, EN 13223, EN 13243, prEN 13796-1, prEN 13796-2, prEN 13796-3.
EN 12930:2004 (E) 9 5.2 Safety principles 5.2.1 General The safety principles set out in EN 12929-1 apply. In addition, the following hazard scenarios and safety requirements relative to the scope of this document are to be taken into consideration: 5.2.2 Hazard scenarios The following events may lead to hazardous situations, which may be avoided or limited by the requirements of this document: a) lack of or poor assessment of the actions on the individual components of the installation; b) use of inappropriate calculation methods or formulae; c) lack of or inadequate consideration of dynamic effects and fatigue effects on individual components; d) lack of or incorrect assessment of the most unfavourable combinations of actions when dimensioning and carrying out calculations; e) erroneous assumptions in the calculations. 5.2.3 Safety measures This document contains the necessary measures to avoid the hazard scenarios listed in 5.2.2 when carrying out verification by calculation and when designing the complete installation as well as individual components, in particular when calculating the longitudinal profile and the rope. 6 General requirements for calculations 6.1 General comments The calculations to be submitted shall demonstrate that the safety requirements for cableways defined in this document and those in the other standards listed in 5.1 are fulfilled. In doing so, the anticipated operating conditions of the installation shall be taken into account. The safety components of the installation shall be verified by calculations, where necessary with respect to static stresses, fatigue stresses, stability and suitability for use. 6.2 Calculation methods Apart from generally recognised methods, all methods used in the calculations shall either be indicated directly or be explained by precise bibliographic references. Methods of approximation and calculation models shall be conservative. The following shall always apply: a) in any calculation of a mechanical system, structure or component, it shall be clear from the documentation what the magnitudes and directions of the actions are assumed to be and which cross-sections have been examined ;
EN 12930:2004 (E) 10 b) the calculations shall be made taking into account the combinations of actions set out in the standards and other specifications. Details of these can be obtained from the relevant standards. Should such information not be available, the most unfavourable loading conditions shall be used as a basis and both the directions and magnitudes of the actions and their combinations shall be specified. 6.3 Presentation of calculations The calculation documents shall be clear and perfectly comprehensible without any additional information. Their origin and date of production shall be stated. The results of computer calculations shall be accompanied by a sheet on which the calculation model, the methods employed and the assumptions are described. Symbols and abbreviations used shall be explained. The version of the computer program used shall be stated. Input values and output values (results) shall be related to each other. 6.4 Verification by tests Verification by tests alone is only permissible if this document or other standards contain no indications concerning the calculation and calculation in accordance with recognised methods is not possible. In exceptional cases, e.g. complex components or dynamic actions, additional verification by tests may be required to supplement calculations in order to verify the characteristics of safety components. The test programme and methods shall produce test conditions which are as close as possible to actual service conditions. 6.5 Actions 6.5.1 General The following groups of actions are taken into account in the calculations: self weight and weight of load; dynamic actions; actions resulting from tension forces in the ropes; actions due to climatic conditions; other actions (e.g. due to avalanches, earthquakes, installation conditions, etc.). The combinations of actions applicable to each component are specified in the standards EN 1908, EN 13223, EN 13107 and prEN 13796-1. 6.5.2 The self-weight of components shall be assessed in accordance with ENV 1991-2-1 or, if no standard applies, according to information from the supplier. With regard to the mass of a person to be adopted for the calculation of th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.