SIST EN 61968-9:2014
(Main)Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control
Application integration at electric utilities - System interfaces for distribution management - Part 9: Interfaces for meter reading and control
EN-IEC 61968-9 specifies the information content of a set of message types that can be used to support many of the business functions related to meter reading and control. Typical uses of the message types include meter reading, controls, events, customer data synchronization and customer switching. Although intended primarily for electrical distribution networks, IEC 61968-9 can be used for other metering applications, including non-electrical metered quantities necessary to support gas and water networks. The purpose of this part of IEC 61968is to define a standard for the integration of metering systems (MS), which includes traditional manual systems, and (one or two-way) automated meter reading (AMR) systems, and meter data management (MDM) systems with other enterprise systems and business functions within the scope of IEC 61968. The scope of this part of IEC 61968is the exchange of information between metering systems, MDM systems and other systems within the utility enterprise. The specific details of communication protocols those systems employ are outside the scope of this International Standard. Instead, this International Standard will recognize and model the general capabilities that can be potentially provided by advanced and/or legacy meter infrastructures, including two-way communication capabilities such as load control, dynamic pricing, outage detection, distributed energy resource (DER) control signals and on-request read. In this way, this standard will not be impacted by the specification, development and/or deployment of next generation meter infrastructures either through the use of standards or proprietary means. The diagram in Figure 1 describes the scope of this part of IEC 61968 from the perspective of direct and causal or indirect impacts of IEC 61968-9 messages. Where the focus of IEC 61968-9 is to define standard messages for the integration of enterprise applications, these messages may be directly or indirectly related to information flows within a broader scope. Examples would include messaging between head end systems and meters or PAN devices. The various components described later in this document will typically fall into either the category of a metering system (MS) head end, an MDM or other enterprise application (e.g. OMS, DRMS, CIS).
Integration von Anwendungen in Anlagen der Elektrizitätsversorgung - Systemschnittstellen für Netzführung - Teil 9: Zählerfernauslesung und -steuerung
Intégration d'applications pour les services électriques - Interfaces système pour la gestion de distribution - Partie 9: Interface pour la lecture et le contrôle des mesures
La CEI 61968-9:2013 spécifie le contenu informationnel d'un ensemble de types de messages qui peuvent être utilisés pour prendre en charge de nombreuses fonctions métier relatives au relevé et à la commande des compteurs. Les utilisations typiques des types de messages comprennent le relevé de compteurs, les commandes, les événements, la synchronisation des données client et la commutation de clientèle. Le but du présent document est de définir une norme pour l'intégration des systèmes de comptage (MS, Metering Systems) qui inclut les systèmes manuels traditionnels et les systèmes de relevés de compteur automatisés (AMR, Automated Meter Reading) (à une seule voie ou à deux voies), ainsi que les systèmes de gestion de données de compteur (MDM, Meter Data Management) avec d'autres systèmes et fonctions métier s'inscrivant dans le domaine d'application de la CEI 61968. Le domaine d'application de la présente norme est l'échange d'informations entre les systèmes de comptage, les systèmes MDM et d'autres systèmes au sein de l'entreprise de distribution. Cette nouvelle édition constitue une révision technique et inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - modifications apportées à et ajout de nouveaux profils pour prendre en charge PAN et les UsagePoints; - extensions pour prendre en charge les appareils PAN génériquement en tant qu'EndDevices; - extensions du modèle et des profils MeterReading pour prendre en charge les descriptions plus riches des grandeurs comptées et pour assurer les relevés coïncidents.
Itegracija aplikacij v elektropodjetjih - Sistemski vmesniki za upravljanje distribucije - 9. del: Vmesniki za odbiranje stanja električnih števcev in krmiljenje (IEC 61968-9:2013)
Standard EN-IEC 61968-9 določa informacijske vsebine nabora vrst sporočil, ki se lahko uporabljajo za podporo številnih poslovnih funkcij v zvezi z odbiranjem stanja električnih števcev in krmiljenjem. Značilne uporabe vrst sporočil vključujejo odbiranje, krmiljenje in dogodke električnih števcev, sinhronizacijo podatkov o strankah in preklapljanje strank. Čeprav je namenjen predvsem omrežjem za distribucijo elektrike, se IEC 61968-9 lahko uporablja za druge aplikacije v zvezi s števci, vključno z neelektričnimi merjenimi količinami, potrebnimi za podporo plinskih in vodnih omrežij. Namen tega dela standarda IEC 61968 je določiti standard za integracijo merilnih sistemov (MS), ki vključujejo tradicionalne ročne sisteme in (eno- ali dvosmerne) avtomatske sisteme za odbiranje števcev ter sisteme za upravljanje podatkov meritev (MDM), z drugimi sistemi in poslovnimi funkcijami v okviru IEC 61968. Področje uporabe tega dela standarda IEC 61968 je izmenjava informacij med merilnim sistemom, sistemom za upravljanje podatkov meritev (MDM) in drugimi sistemi znotraj podjetja. Posamezne podrobnosti o komunikacijskih protokolih, ki jih uporabljajo ti sistemi, so izven območja uporabe tega standarda. Namesto tega ta mednarodni standard prepoznava in modelira splošne zmogljivosti, ki jih morebiti lahko zagotavlja napredna in/ali starejša infrastruktura števcev, vključno z zmogljivostmi dvosmerne komunikacije, kot so nadzor obremenitve, dinamično oblikovanje cen, zaznavanje izpada, signali za nadzor virov distribuirane energije (DER) in odbiranje na zahtevo. Na ta način na ta standard ne vplivajo specifikacija, razvoj in/ali namestitev infrastruktur za števce naslednje generacije, z uporabo standardov ali lastniških sredstev. Diagram na sliki 1 prikazuje področje uporabe tega dela standarda IEC 61968 z vidika neposrednih in vzročnih oziroma posrednih vplivov sporočil standarda IEC 61968-9. Čeprav se standard IEC 61968-9 osredotoča na opredelitev standardnih sporočil za integracijo podjetniških aplikacij, so lahko ta sporočila posredno ali neposredno povezana s pretokom informacij v širšem okviru. Primeri vključujejo sporočanje med sistemi z glavnimi sprejemnimi postajami in merilniki ali napravami PAN. Različne komponente, opisane v tem dokumentu, navadno spadajo v kategorijo glavnih sprejemnih postaj merilnih sistemov (MS), sistemov za upravljanje podatkov meritev ali drugih podjetniških aplikacij (npr. OMS, DRMS, CIS).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2014
Nadomešča:
SIST EN 61968-9:2010
Itegracija aplikacij v elektropodjetjih - Sistemski vmesniki za upravljanje
distribucije - 9. del: Vmesniki za odbiranje stanja električnih števcev in krmiljenje
(IEC 61968-9:2013)
Application integration at electric utilities - System interfaces for distribution management
- Part 9: Interfaces for meter reading and control
Integration von Anwendungen in Anlagen der Elektrizitätsversorgung -
Systemschnittstellen für Netzführung - Teil 9: Zählerfernauslesung und -steuerung
Intégration d'applications pour les services électriques - Interfaces système pour la
gestion de distribution - Partie 9: Interface pour la lecture et le contrôle des mesures
Ta slovenski standard je istoveten z: EN 61968-9:2014
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61968-9
NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM
ICS 33.200 Supersedes EN 61968-9:2009
English version
Application integration at electric utilities -
System interfaces for distribution management -
Part 9: Interfaces for meter reading and control
(IEC 61968-9:2013)
Intégration d'applications pour les services Integration von Anwendungen in Anlagen
électriques - der Elektrizitätsversorgung -
Interfaces système pour la gestion de Systemschnittstellen für Netzführung -
distribution - Teil 9: Zählerfernauslesung und -
Partie 9: Interfaces pour le relevé et la steuerung
commande des compteurs (IEC 61968-9:2013)
(CEI 61968-9:2013)
This European Standard was approved by CENELEC on 2013-11-20. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61968-9:2014 E
Foreword
The text of document 57/1377/FDIS, future edition 1 of IEC 61968-9, prepared by IEC/TC 57, "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61968-9:2014.
The following dates are fixed:
(dop) 2014-10-11
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-11-20
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61968-9:2009.
EN 61968-9:2009:
a) changes to and addition of new profiles to support PAN and Usage Points;
b) extensions to support PAN devices generically as EndDevices;
c) extensions to the MeterReading model and profiles to support richer
descriptions of metered quantities and to accommodate coincident readings;
d) addition of CIM Name class and corresponding revisions to profiles to allow reference
by name instead of by mRID. W here the document may identif y the use of mRID
values as references, Name.name values may be alternatively used. This is described
in more detail in Annex G;
e) reference of ReadingTypes, EndDeviceEventTypes and EndDeviceControlTypes
using name references;
f) definition of normative enumerations for ReadingTypes, EndDeviceEventTypes
and EndDeviceControlTypes in annexes;
g) various corrections to example sequence diagrams;
h) Removal of MeterAssetReading profile, where functionality is supported using
the MeterReading profile;
i) MeterAsset class is now named Meter;
j) MeterAssetConfig profile now named MeterConfig;
k) EndDeviceAssets profile now named EndDeviceConfig;
l) removal of EndDeviceFirmware profile, where functionality is supported using
the EndDeviceConfig profile;
m) use of new namespaces to reflect the new edition, where the namespaces is
reflective of the year in which a profile is defined;
n) adoption of UsagePoint as a replacement for and a generalization of
- 3 - EN 61968-9:2014
ServiceDeliveryPoint;
o) SDPLocationConfig has been deprecated in favor of UsagePointLocationConfig;
p) some profiles previously defined have been moved into the new subclause 5.10 which
is focused on data linkages;
q) elimination of the MeterSystemEvents profile, as it provided no functionality that
could not be achieved with the EndDeviceEvents profile;
r) there were several profiles originally defined in support of prepayment use cases
that were identified to be more general in nature, and were consequentially moved to
5.10. Subclause 5.8 now consists of only those profiles that are specific to prepaym
ent. In all cases there has been some refactoring of these profiles to reflect
other necessary changes that have been described;
s) supplierConfig has been renamed ServiceSupplierConfig;
t) messages using the SUBSCRIBE verb have been removed as these are related to the
underlying communication transport and do not reflect actual EN 61968 messages.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61968-9:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61970-552 NOTE Harmonised as EN 61970-552 (not modified).
IEC 62056 (Series) NOTE Harmonised as EN 62056 (Series) (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-300 - International Electrotechnical Vocabulary - - -
Electrical and electronic measurements and
measuring instruments -
Part 311: General terms relating to
measurements -
Part 312: General terms relating to electrical
measurements -
Part 313: Types of electrical measuring
instruments -
Part 314: Specific terms according to the type of
instrument
IEC 61968-1 - Application integration at electric utilities - EN 61968-1 -
System interfaces for distribution management -
Part 1: Interface architecture and general
requirements
IEC/TS 61968-2 - Application integration at electric utilities - - -
System interfaces for distribution management -
Part 2: Glossary
IEC 61968-11 - Application integration at electric utilities - EN 61968-11 -
System interfaces for distribution management -
Part 11: Common information model (CIM)
extensions for distribution
IEC 61968-100 2013 Application integration at electric utilities - EN 61968-100 2013
System interfaces for distribution management -
Part 100: Implementation profiles
IEC 61970-301 - Energy management system application EN 61970-301 -
program interface (EMS-API) -
Part 301: Common information model (CIM)
base
IEC/TR 62051-1 - Electricity metering - Data exchange for meter - -
+ corr. June reading, tariff and load control - Glossary of
terms -
Part 1: Terms related to data exchange with
metering equipment using DLMS/COSEM
ISO 8601 2004 Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEC 61968-9 ®
Edition 2.0 2013-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Application integration at electric utilities – System interfaces for distribution
management –
Part 9: Interfaces for meter reading and control
Intégration d'applications pour les services électriques – Interfaces système
pour la gestion de distribution –
Partie 9: Interfaces pour le relevé et la commande des compteurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 33.200 ISBN 978-2-8322-1165-6
– 2 – 61968-9 IEC:2013
CONTENTS
FOREWORD . 9
INTRODUCTION . 12
1 Scope . 14
2 Normative references . 15
3 Terms, definitions and abbreviations . 16
3.1 Terms and definitions . 16
3.2 Abbreviations . 17
4 Reference and information models . 18
4.1 General approach to metering systems . 18
4.2 Reference Model . 19
4.2.1 General . 19
4.2.2 Metering system (MS) – Data collection . 22
4.2.3 Metering system (MS) – Control and reconfiguration . 23
4.2.4 Load control . 23
4.2.5 Load management system (LMS) . 23
4.2.6 Meter asset management (MAM) system . 24
4.2.7 Meter data management (MDM) system . 24
4.2.8 Customer information system (CIS) . 24
4.2.9 Outage management system (OMS) . 24
4.2.10 Network operations (NO) . 25
4.2.11 Meter maintenance (MM) . 25
4.2.12 Planning . 25
4.2.13 Work management (WM) . 25
4.2.14 Point of sale (POS) . 25
4.2.15 Meter . 25
4.2.16 Load control devices . 25
4.2.17 PAN devices . 26
4.2.18 Demand response management system (DRMS) . 26
4.3 Interface reference model . 26
4.4 Meter reading and control functions and components . 26
4.5 Static information model . 27
4.5.1 General . 27
4.5.2 Classes for meter reading and control . 28
4.5.3 Classes related to meter reading and control . 32
5 Meter reading and control message types . 33
5.1 General . 33
5.2 End device event messages
...
SLOVENSKI STANDARD
01-junij-2014
1DGRPHãþD
SIST EN 61968-9:2010
=GUXåHYDQMHDSOLNDFLMYHOHNWURSRGMHWMLK6LVWHPVNLYPHVQLNL]DXSUDYOMDQMH
GLVWULEXFLMH GHO 9PHVQLNL]DRGELUDQMHVWDQMDHOHNWULþQLKãWHYFHYLQNUPLOMHQMH
,(&
Application integration at electric utilities - System interfaces for distribution management
- Part 9: Interfaces for meter reading and control
Intégration d'applications pour les services électriques - Interfaces système pour la
gestion de distribution - Partie 9: Interface pour la lecture et le contrôle des mesures
Ta slovenski standard je istoveten z: EN 61968-9:2014
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61968-9
NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM
ICS 33.200 Supersedes EN 61968-9:2009
English version
Application integration at electric utilities -
System interfaces for distribution management -
Part 9: Interfaces for meter reading and control
(IEC 61968-9:2013)
Intégration d'applications pour les services Integration von Anwendungen in Anlagen
électriques - der Elektrizitätsversorgung -
Interfaces système pour la gestion de Systemschnittstellen für Netzführung -
distribution - Teil 9: Zählerfernauslesung und -
Partie 9: Interfaces pour le relevé et la steuerung
commande des compteurs (IEC 61968-9:2013)
(CEI 61968-9:2013)
This European Standard was approved by CENELEC on 2013-11-20. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61968-9:2014 E
Foreword
The text of document 57/1377/FDIS, future edition 1 of IEC 61968-9, prepared by IEC/TC 57, "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61968-9:2014.
The following dates are fixed:
(dop) 2014-10-11
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-11-20
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61968-9:2009.
EN 61968-9:2009:
a) changes to and addition of new profiles to support PAN and Usage Points;
b) extensions to support PAN devices generically as EndDevices;
c) extensions to the MeterReading model and profiles to support richer
descriptions of metered quantities and to accommodate coincident readings;
d) addition of CIM Name class and corresponding revisions to profiles to allow reference
by name instead of by mRID. W here the document may identif y the use of mRID
values as references, Name.name values may be alternatively used. This is described
in more detail in Annex G;
e) reference of ReadingTypes, EndDeviceEventTypes and EndDeviceControlTypes
using name references;
f) definition of normative enumerations for ReadingTypes, EndDeviceEventTypes
and EndDeviceControlTypes in annexes;
g) various corrections to example sequence diagrams;
h) Removal of MeterAssetReading profile, where functionality is supported using
the MeterReading profile;
i) MeterAsset class is now named Meter;
j) MeterAssetConfig profile now named MeterConfig;
k) EndDeviceAssets profile now named EndDeviceConfig;
l) removal of EndDeviceFirmware profile, where functionality is supported using
the EndDeviceConfig profile;
m) use of new namespaces to reflect the new edition, where the namespaces is
reflective of the year in which a profile is defined;
n) adoption of UsagePoint as a replacement for and a generalization of
- 3 - EN 61968-9:2014
ServiceDeliveryPoint;
o) SDPLocationConfig has been deprecated in favor of UsagePointLocationConfig;
p) some profiles previously defined have been moved into the new subclause 5.10 which
is focused on data linkages;
q) elimination of the MeterSystemEvents profile, as it provided no functionality that
could not be achieved with the EndDeviceEvents profile;
r) there were several profiles originally defined in support of prepayment use cases
that were identified to be more general in nature, and were consequentially moved to
5.10. Subclause 5.8 now consists of only those profiles that are specific to prepaym
ent. In all cases there has been some refactoring of these profiles to reflect
other necessary changes that have been described;
s) supplierConfig has been renamed ServiceSupplierConfig;
t) messages using the SUBSCRIBE verb have been removed as these are related to the
underlying communication transport and do not reflect actual EN 61968 messages.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61968-9:2013 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61970-552 NOTE Harmonised as EN 61970-552 (not modified).
IEC 62056 (Series) NOTE Harmonised as EN 62056 (Series) (not modified).
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60050-300 - International Electrotechnical Vocabulary - - -
Electrical and electronic measurements and
measuring instruments -
Part 311: General terms relating to
measurements -
Part 312: General terms relating to electrical
measurements -
Part 313: Types of electrical measuring
instruments -
Part 314: Specific terms according to the type of
instrument
IEC 61968-1 - Application integration at electric utilities - EN 61968-1 -
System interfaces for distribution management -
Part 1: Interface architecture and general
requirements
IEC/TS 61968-2 - Application integration at electric utilities - - -
System interfaces for distribution management -
Part 2: Glossary
IEC 61968-11 - Application integration at electric utilities - EN 61968-11 -
System interfaces for distribution management -
Part 11: Common information model (CIM)
extensions for distribution
IEC 61968-100 2013 Application integration at electric utilities - EN 61968-100 2013
System interfaces for distribution management -
Part 100: Implementation profiles
IEC 61970-301 - Energy management system application EN 61970-301 -
program interface (EMS-API) -
Part 301: Common information model (CIM)
base
IEC/TR 62051-1 - Electricity metering - Data exchange for meter - -
+ corr. June reading, tariff and load control - Glossary of
terms -
Part 1: Terms related to data exchange with
metering equipment using DLMS/COSEM
ISO 8601 2004 Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
IEC 61968-9 ®
Edition 2.0 2013-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Application integration at electric utilities – System interfaces for distribution
management –
Part 9: Interfaces for meter reading and control
Intégration d'applications pour les services électriques – Interfaces système
pour la gestion de distribution –
Partie 9: Interfaces pour le relevé et la commande des compteurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 33.200 ISBN 978-2-8322-1165-6
– 2 – 61968-9 IEC:2013
CONTENTS
FOREWORD . 9
INTRODUCTION . 12
1 Scope . 14
2 Normative references . 15
3 Terms, definitions and abbreviations . 16
3.1 Terms and definitions . 16
3.2 Abbreviations . 17
4 Reference and information models . 18
4.1 General approach to metering systems . 18
4.2 Reference Model . 19
4.2.1 General . 19
4.2.2 Metering system (MS) – Data collection . 22
4.2.3 Metering system (MS) – Control and reconfiguration . 23
4.2.4 Load control . 23
4.2.5 Load management system (LMS) . 23
4.2.6 Meter asset management (MAM) system . 24
4.2.7 Meter data management (MDM) system . 24
4.2.8 Customer information system (CIS) . 24
4.2.9 Outage management system (OMS) . 24
4.2.10 Network operations (NO) . 25
4.2.11 Meter maintenance (MM) . 25
4.2.12 Planning . 25
4.2.13 Work management (WM) . 25
4.2.14 Point of sale (POS) . 25
4.2.15 Meter . 25
4.2.16 Load control devices . 25
4.2.17 PAN devices . 26
4.2.18 Demand response management system (DRMS) . 26
4.3 Interface reference model . 26
4.4 Meter reading and control functions and components . 26
4.5 Static information model . 27
4.5.1 General . 27
4.5.2 Classes for meter reading and control . 28
4.5.3 Classes related to meter reading and control . 32
5 Meter reading and control message types . 33
5.1 General . 33
5.2 End device event messages . 33
5.2.1 General . 33
5.2.2 Applications . 34
5.2.3 Message format .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.