SIST EN 15436-3:2015

Road service area maintenance equipment - Part 3: Classification

This document defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436 1 and used for:
-   grass cutting and brush cutting;
-   mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles, and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas. This document is intended to be used also in conjunction with FprEN 15436 2.

Straßenbetriebsdienstausstattung - Teil 3: Klassifikation

Dieses Dokument legt die Klassifizierungskriterien von Geräten für den Straßenbetriebsdienst fest, die im Anwendungsbereich von EN 15436 1 beschrieben und für folgende Tätigkeiten genutzt werden:
-   Mäharbeiten und Gestrüppentfernung;
-   mechanisches Schneiden von Pflanzen.
Die vorgenannten Geräte sind auf Trägerfahrzeugen mit Eigenantrieb montiert und sind einerseits dafür vorgesehen Gras zu mähen und Gestrüpp zu verkleinern, und andererseits Bäume oder junge, unbeschnittene Bäume und Sträucher in Straßenrandbereichen zu schneiden. Die Anwendung dieses Dokumentes ist in Verbindung mit FprEN 15436-2 vorgesehen.

Matériel d'entretien des dépendances routières - Partie 3: Classification

La présente norme définit les critères de classification des matériels d'entretien des dépendances routières décrits dans le domaine d'application de l'EN 15436 1 et utilisés pour les opérations de :
—   fauchage et débroussaillage ;
—   taille mécanique des végétaux.
Ces matériels sont montés sur porteur automoteur destinés d'une part à faucher et broyer l'herbe et les broussailles, et d'autre part à tailler les arbres, baliveaux et arbustes, des dépendances routières. Ce document est destiné à une utilisation conjointe avec la norme EN 15436 2.

Oprema za vzdrževanje cest - 3. del: Klasifikacija

Ta dokument določa kriterije za klasifikacijo opreme za vzdrževanje cest, opisane v standardu EN 15436 1 in ki se uporablja za:
– košnjo trave in podrasti;
– mehansko odstranjevanje rastlin.
Ta oprema je nameščena na nosilna vozila z lastnim pogonom in je namenjena košnji in drobljenju trave in podrasti ter pristriževanju dreves, mladik in grmičevja ob cestah. Ta dokument je lahko uporabljen tudi v povezavi s standardom FprEN 15436 2.

General Information

• Status: Published
• Public Enquiry End Date: 04-Feb-2015
• Publication Date: 28-Jul-2015
• ICS: 43.160 - Special purpose vehicles
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Jul-2015
• Due Date: 13-Sep-2015
• Completion Date: 29-Jul-2015
• Ref Project: EN 15436-3:2015 - Road service area maintenance equipment - Part 3: Classification

Relations

• Replaces: SIST-TS CEN/TS 15436-3:2009 - Road service area maintenance equipment - Part 3: Classification
• Effective Date: 01-Sep-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za vzdrževanje cest - 3. del: KlasifikacijaStraßenbetriebsdienstausstattung - Teil 3: KlassifikationMatériel d'entretien des dépendances routières - Partie 3: ClassificationRoad service area maintenance equipment - Part 3: Classification43.160Vozila za posebne nameneSpecial purpose vehiclesICS:Ta slovenski standard je istoveten z:EN 15436-3:2015SIST EN 15436-3:2015en,fr,de01-september-2015SIST EN 15436-3:2015SLOVENSKI
STANDARDSIST-TS CEN/TS 15436-3:20091DGRPHãþD



SIST EN 15436-3:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15436-3
July 2015 ICS 43.160 Supersedes CEN/TS 15436-3:2009English Version
Road service area maintenance equipment - Part 3: Classification
Matériel d'entretien des dépendances routières - Partie 3: Classification
Straßenbetriebsdienstausstattung - Teil 3: Klassifikation This European Standard was approved by CEN on 14 May 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15436-3:2015 ESIST EN 15436-3:2015



EN 15436-3:2015 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Performance requirements .5 4.1 Criteria .5 4.2 Tolerances on characteristics for machine construction .5 Bibliography .7
SIST EN 15436-3:2015



EN 15436-3:2015 (E) 3 Foreword This document (EN 15436-3:2015) has been prepared by Technical Committee CEN/TC 337 “Road operation equipment and products”, the secretariat of which is held by AFNOR. This document supersedes CEN/TS 15436-3:2009. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za vzdrževalna dela zimske službe in službe za vzdrževanje cest - 3. del: KlasifikacijaStraßenbetriebsdienstausstattung - Teil 3: KlassifikationRoad service area maintenance equipment - Part 3: Classification43.160Vozila za posebne nameneSpecial purpose vehiclesICS:Ta slovenski standard je istoveten z:FprEN 15436-3kSIST FprEN 15436-3:2015en,fr,de01-januar-2015kSIST FprEN 15436-3:2015SLOVENSKI
STANDARD



kSIST FprEN 15436-3:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 15436-3
November 2014 ICS 43.160 Will supersede CEN/TS 15436-3:2009English Version
Road service area maintenance equipment - Part 3: Classification
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 337.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 15436-3:2014 EkSIST FprEN 15436-3:2015



FprEN 15436-3:2014 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Performance requirements .5 4.1 Criteria .5 4.2 Tolerances on characteristics for machine construction .5 Bibliography .
...