SIST EN 13614:2011
(Main)Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test
This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water.
The method considers two different aspects of adhesivity i.e. immediate adhesivity and water effect on binder adhesion.
The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site.
Conformity to the “adhesivity” requirement specified in EN 13808 is to be assessed while measuring the water effect on binder adhesion with a reference aggregate.
WARNING —The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Haftung eines Bindemittelüberzuges aus Bitumenemulsion an Gesteinskörnung bei Wasserlagerung fest.
Das Verfahren berücksichtigt zwei verschiedene Aspekte des Haftverhaltens, d. h. das unmittelbare Haft-verhalten und die Wirkung von Wasser auf die Haftung des Bindemittels.
Das Verfahren kann mit einer Referenz-Gesteinskörnung angewendet werden. In diesem Falle misst es das eigentliche Haftungsverhalten einer Bitumenemulsion. Das Verfahren kann ebenso mit einer spezifischen Gesteinskörnung angewendet werden, wie sie auch auf einer Baustelle verwendet wird.
Die Konformität mit der in EN 13808 festgelegten Anforderung an die „Haftung“ ist zu beurteilen, während die Auswirkungen des Wassers auf die Haftung des Bindemittels mit einer Referenz-Gesteinskörnung gemessen werden.
WARNUNG — Die Anwendung dieser Norm kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. In dieser Europäischen Norm werden nicht alle Sicherheitsprobleme angesprochen, die mit ihrer Anwendung verbunden sind. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und vorher zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eau
La présente Norme européenne décrit une méthode permettant de déterminer les propriétés d’adhésion d’une
émulsion de bitume vis-à-vis de granulats en immersion dans l’eau.
La méthode prend en compte deux aspects distincts de l'adhésivité, à savoir l'adhésivité immédiate et l'effet de l'eau sur l'adhésion du liant.
La méthode peut être mise en œuvre avec un granulat de référence. Dans ce cas, elle mesure l’aptitude à l’adhésivité intrinsèque de l’émulsion de bitume. La méthode peut également être mise en œuvre avec un granulat spécifique utilisé sur chantier.
AVERTISSEMENT — L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje obstojnosti bitumenskega filma pod vodo
Ta evropski standard določa metodo za določanje obstojnosti bitumenskega filma na agregatu pod vodo.
Metoda obravnava dva različna vidika obstojnosti, tj. takojšnjo obstojnost in učinek vode na obstojnost veziva.
Metoda se lahko uporablja z referenčnim agregatom. V tem primeru meri intrinzično obstojnost bitumenske emulzije. Metoda se lahko uporablja tudi s specifičnim agregatom pri uporabi na gradbišču.
Skladnost z zahtevami »obstojnosti«, določenimi v EN 13808, je treba ocenjevati z merjenjem učinka vode na obstojnost veziva na referenčnem agregatu.
OPOZORILO: Uporaba tega evropskega standarda lahko vključuje nevarne materiale, delovne postopke in opremo. Ta evropski standard nima namena obravnavati vseh varnostnih problemov, povezanih z njegovo uporabo. Odgovornost uporabnika tega evropskega standarda je, da vzpostavi primerne varnostne in zdravstvene prakse in pred uporabo določi veljavnost regulativnih omejitev.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YRGRBitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei WasserlagerungBitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eauBitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13614:2011SIST EN 13614:2011en,fr,de01-junij-2011SIST EN 13614:2011SLOVENSKI
STANDARDSIST EN 13614:20041DGRPHãþD
SIST EN 13614:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13614
March 2011 ICS 75.140 Supersedes EN 13614:2004English Version
Bitumen and bituminous binders -Determination of adhesivity of bituminous emulsions by water immersion test
Bitumes et liants bitumineux -Détermination de l'adhésivité des émulsions de bitume par l'essai d'immersion dans l'eau Bitumen und bitumenhaltige Bindemittel -Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung This European Standard was approved by CEN on 12 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13614:2011: ESIST EN 13614:2011
EN 13614:2011 (E) 2 Contents
Page Foreword . 31Scope . 42Normative references . 43Terms and definitions . 44Principle . 55Reagents and materials . 56Apparatus . 57Sampling . 58Procedure . 69Expression of results . 710Precision . 711Test report . 7Annex A (informative)
Guidance for the marking of coated surface area . 8Bibliography . 9 SIST EN 13614:2011
EN 13614:2011 (E) 3 Foreword This document (EN 13614:2011) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR/BNPé. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13614:2004. This revised version (EN 13614:2011) makes a distinction between “immediate” adhesivity and water effect on binder adhesion. Compliance to the adhesivity requirements set by EN 13808 is verified according to the procedure defined for testing water effect on binder adhesion. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 13614:2011
EN 13614:2011 (E) 4 1 Scope This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water. The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion. The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site. WARNING — The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders — Sampling bituminous binders EN 12594, Bitumen and bituminous binders — Preparation of test samples
EN 13808, Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions EN ISO 3696, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987) 3 Terms and definitions For the purposes of this document, the fol
...
SLOVENSKI STANDARD
oSIST prEN 13614:2010
01-januar-2010
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHREVWRMQRVWLELWXPHQVNHJDILOPDSRG
YRGR
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions
by water immersion test
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von
Bitumenemulsionen bei Wasserlagerung
Bitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par
l'essai d'immersion dans l'eau
Ta slovenski standard je istoveten z: prEN 13614
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 13614:2010 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13614:2010
---------------------- Page: 2 ----------------------
oSIST prEN 13614:2010
EUROPEAN STANDARD
DRAFT
prEN 13614
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2009
ICS 75.140; 91.100.50 Will supersede EN 13614:2004
English Version
Bitumen and bituminous binders - Determination of adhesivity of
bituminous emulsions by water immersion test
Bitumes et liants bitumineux - Détermination de l'adhésivité Bitumen und bitumenhaltige Bindemittel - Bestimmung des
des émulsions de bitume par l'essai d'immersion dans l'eau Haftverhaltens von Bitumenemulsionen bei
Wasserlagerung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13614:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13614:2010
prEN 13614:2009 (E)
Contents
Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Reagents and materials . 5
6 Apparatus . 5
7 Sampling . 5
8 Procedure . 6
9 Expression of results . 7
10 Precision . 7
11 Test report . 8
Annex A (informative) Guidance for the marking of coated surface area . 9
Bibliography . 10
2
---------------------- Page: 4 ----------------------
oSIST prEN 13614:2010
prEN 13614:2009 (E)
Foreword
This document (prEN 13614:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”,
the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13614:2004.
3
---------------------- Page: 5 ----------------------
oSIST prEN 13614:2010
prEN 13614:2009 (E)
1 Scope
This European Standard specifies a method for determining the adhesion of a bituminous emulsion coated onto
aggregate when immersed in water.
The method considers two different aspects of adhesivity i.e. immediate adhesivity and water effect on binder
adhesion.
The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of
a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site.
Conformity to the “adhesivity” requirement specified in EN 13808 is to be assessed while measuring the water
effect on binder adhesion with a reference aggregate.
WARNING —The use of this European Standard may involve hazardous materials, operations and
equipment. This European Standard does not purport to address all of the safety problems associated with
its use. It is the responsibility of the user of this European Standard to establish appropriate safety and
health practices and determine the applicability of regulatory limitations prior to use.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 58, Bitumen and bituminous binders – Sampling bituminous binders
EN 12594, Bitumen and bituminous binders – Preparation of test samples
EN 13043, Aggregates for bituminous mixtures and surface treatments of roads, airfields and other trafficked areas
EN 13808, Bitumen and bituminous binders – Framework for specifying cationic bituminous emulsions
EN ISO 3696, Water for analytical laboratory use – Specification and test methods (ISO 3696:1987)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
adhesion
ability of a binder to coat the surface of an aggregate and to remain bonded over time
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.