Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test

This document specifies a method for determining the adhesion of a bituminous emulsion coated onto aggregate when immersed in water.
The method considers two different aspects of adhesivity, i.e. immediate adhesivity and water effect on binder adhesion.
The method may be used with a reference aggregate. In that case, it measures the intrinsic adhesion behaviour of a bituminous emulsion. The method may also be used with a specific aggregate as used on a job site.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von Bitumenemulsionen bei Wasserlagerung

Dieses Dokument legt ein Verfahren zur Bestimmung der Haftung eines Bindemittelüberzuges aus Bitumenemulsion an Gesteinskörnung bei Wasserlagerung fest.
Das Verfahren berücksichtigt zwei verschiedene Aspekte des Haftverhaltens, d. h. das unmittelbare Haft¬verhalten und die Auswirkung des Wassers auf die Haftung des Bindemittels.
Das Verfahren darf mit einer Referenz-Gesteinskörnung angewendet werden. In diesem Falle misst es das eigentliche Haftungsverhalten einer Bitumenemulsion. Das Verfahren kann ebenso mit einer spezifischen Gesteinskörnung angewendet werden, wie sie auch auf einer Baustelle verwendet wird.
WARNHINWEIS - Die Anwendung dieses Dokuments kann gefährliche Substanzen, Arbeitsgänge und Ausrüstung einschließen. Dieses Dokument beansprucht nicht, alle damit verbundenen Sicherheitsprobleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieses Dokuments, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und vorher zu klären, ob einschränkende Vorschriften zu berücksichtigen sind.

Bitumes et liants bitumineux - Détermination de l'adhésivité des émulsions bitumineuses par l'essai d'immersion dans l'eau

Le présent document décrit une méthode permettant de déterminer les propriétés d’adhésion d’une émulsion bitumineuse vis-à-vis de granulats, en immersion dans l’eau.
La méthode prend en compte deux aspects distincts de l'adhésivité, à savoir l'adhésivité immédiate et l'effet de l'eau sur l'adhésion du liant.
La méthode peut être mise en oeuvre avec un granulat de référence. Dans ce cas, elle mesure l’aptitude à l’adhésivité intrinsèque de l’émulsion bitumineuse. La méthode peut également être mise en oeuvre avec un granulat spécifique utilisé sur chantier.
AVERTISSEMENT - L'utilisation de ce document implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. Le présent document n'est pas censé aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de ce document de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Določanje adhezije bitumenskih emulzij s preskusom potapljanja v vodo

General Information

Status
Published
Publication Date
30-Mar-2021
Withdrawal Date
29-Sep-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-Mar-2021
Due Date
22-Jul-2021
Completion Date
31-Mar-2021

Relations

Buy Standard

Standard
EN 13614:2021 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13614:2021
01-julij-2021
Nadomešča:
SIST EN 13614:2011
Bitumen in bitumenska veziva - Določanje adhezije bitumenskih emulzij s
preskusom potapljanja v vodo
Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions
by water immersion test
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Haftverhaltens von
Bitumenemulsionen bei Wasserlagerung
Bitumes et liants bitumineux - Détermination de l'adhésivité des émulsions de bitume par
l'essai d'immersion dans l'eau
Ta slovenski standard je istoveten z: EN 13614:2021
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13614:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13614:2021

---------------------- Page: 2 ----------------------
SIST EN 13614:2021


EN 13614
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2021
EUROPÄISCHE NORM
ICS 75.140; 91.100.50 Supersedes EN 13614:2011
English Version

Bitumen and bituminous binders - Determination of
adhesivity of bituminous emulsions by water immersion
test
Bitumes et liants bitumineux - Détermination de Bitumen und bitumenhaltige Bindemittel -
l'adhésivité des émulsions bitumineuses par l'essai Bestimmung des Haftverhaltens von
d'immersion dans l'eau Bitumenemulsionen bei Wasserlagerung
This European Standard was approved by CEN on 1 March 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13614:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13614:2021
EN 13614:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Reagents and materials . 5
6 Apparatus . 5
7 Sampling . 6
8 Procedure. 6
8.1 General . 6
8.2 Determination of immediate adhesivity . 6
8.3 Water effect on binder adhesion
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.