Geographic information -- Schema for coverage geometry and functions

ISO 19123:2005 defines a conceptual schema for the spatial characteristics of coverages. Coverages support mapping from a spatial, temporal or spatiotemporal domain to feature attribute values where feature attribute types are common to all geographic positions within the domain. A coverage domain consists of a collection of direct positions in a coordinate space that may be defined in terms of up to three spatial dimensions as well as a temporal dimension. Examples of coverages include rasters, triangulated irregular networks, point coverages and polygon coverages. Coverages are the prevailing data structures in a number of application areas, such as remote sensing, meteorology and mapping of bathymetry, elevation, soil and vegetation.  
ISO 19123:2005 defines the relationship between the domain of a coverage and an associated attribute range. The characteristics of the spatial domain are defined whereas the characteristics of the attribute range are not part of ISO 19123:2005.

Information géographique -- Schéma de la géométrie et des fonctions de couverture

L'ISO 19123:2005 définit un schéma conceptuel des caractéristiques spatiales des couvertures. Les couvertures servent de base à la cartographie réalisée à partir d'un domaine spatial, temporel ou spatio-emporel permettant ainsi d'obtenir les valeurs attributaires d'entités dont les types d'attributs sont communs à toutes les positions géographiques existant dans le domaine. Un domaine de couverture se compose d'un ensemble de positions directes dans un espace de coordonnées qui peut être défini comme tridimensionnel ou bien temporel. Parmi les exemples de couverture, citons les matrices, les réseaux irréguliers de triangles, les couvertures de points et les couvertures de polygones. Les couvertures sont les structures de données courantes dans divers champs d'application, notamment la télédétection, la météorologie, la bathymétrie, l'altitude, le sol et la végétation.
L'ISO 19123:2005 définit la relation entre le domaine d'une couverture et une plage d'attributs associée. Les caractéristiques du domaine spatial sont définies, mais les caractéristiques des attributs ne font pas partie du domaine d'application de l'ISO 19123:2005.

Geografske informacije – Shema za geometrijo podatkovnega sloja in funkcije

General Information

Status
Not Published
Public Enquiry End Date
31-Oct-2006
Withdrawal Date
17-Aug-2009
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
20-Aug-2009
Due Date
25-Aug-2009
Completion Date
01-Sep-2009

Relations

Buy Standard

Standard
ISO 19123:2005 - Geographic information -- Schema for coverage geometry and functions
English language
65 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 19123:2005 - Information géographique -- Schéma de la géométrie et des fonctions de couverture
French language
67 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
ISO 19123:2006
English language
71 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 19123
First edition
2005-08-15
Geographic information — Schema for
coverage geometry and functions
Information géographique — Schéma de la géométrie et des fonctions
de couverture
Reference number
©
ISO 2005
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Conformance. 1
3 Normative references . 2
4 Terms, definitions, abbreviated terms and notation . 2
4.1 Terms and definitions. 2
4.2 Abbreviated terms . 7
4.3 Notation . 7
5 Fundamental characteristics of coverages.8
5.1 The context for coverages . 8
5.2 The coverage schema . 9
5.3 CV_Coverage. 10
5.4 CV_DomainObject. 13
5.5 CV_AttributeValues . 13
5.6 CV_CommonPointRule. 14
5.7 CV_DiscreteCoverage . 14
5.8 CV_GeometryValuePair. 15
5.9 CV_ContinuousCoverage . 16
5.10 CV_ValueObject . 17
5.11 CV_InterpolationMethod . 18
5.12 Subclasses of CV_ContinuousCoverage . 18
6 Discrete coverages. 18
6.1 Discrete coverage types . 18
6.2 CV_DiscretePointCoverage . 19
6.3 CV_PointValuePair. 20
6.4 CV_DiscreteGridPointCoverage. 20
6.5 CV_GridPointValuePair . 21
6.6 CV_DiscreteCurveCoverage . 21
6.7 CV_CurveValuePair . 22
6.8 CV_DiscreteSurfaceCoverage . 22
6.9 CV_SurfaceValuePair . 24
6.10 CV_DiscreteSolidCoverage . 24
6.11 CV_SolidValuePair. 24
7 Thiessen polygon coverage . 25
7.1 Thiessen polygon networks . 25
7.2 CV_ThiessenPolygonCoverage. 25
7.3 CV_ThiessenValuePolygon . 27
8 Quadrilateral grid coverages . 27
8.1 General. 27
8.2 Quadrilateral grid geometry. 27
8.3 CV_Grid. 30
8.4 CV_GridEnvelope. 31
8.5 CV_GridPoint. 31
8.6 CV_GridCoordinate. 32
8.7 CV_GridCell . 32
8.8 CV_Footprint . 33
8.9 CV_RectifiedGrid . 33
8.10 CV_ReferenceableGrid . 34
8.11 CV_ContinousQuadrilateralGridCoverage . 35
8.12 CV_GridValueCell. 36
8.13 CV_GridPointValuePair . 36
8.14 CV_GridValuesMatrix. 37
8.15 CV_SequenceRule . 38
8.16 CV_SequenceType. 38
9 Hexagonal Grid Coverages . 39
9.1 General . 39
9.2 CV_HexagonalGridCoverage . 39
9.3 CV_GridValuesMatrix. 41
9.4 CV_ValueHexagon . 41
10 Triangulated irregular network (TIN) coverages. 41
10.1 General . 41
10.2 CV_TINCoverage . 43
10.3 CV_ValueTriangle. 43
11 Segmented curve coverages . 44
11.1 General . 44
11.2 CV_SegmentedCurveCoverage . 45
11.3 CV_ValueCurve . 45
11.4 CV_ValueSegment . 46
11.5 Evaluation . 46
Annex A (normative) Abstract test suite. 47
Annex B (informative) UML Notation . 51
Annex C (informative) Interpolation methods. 56
Annex D (informative) Sequential enumeration. 60
Bibliography . 65

iv © ISO 2005 – All rights reserved

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19123 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
Introduction
Geographic phenomena fall into two broad categories — discrete and continuous. Discrete phenomena are
recognizable objec
...


NORME ISO
INTERNATIONALE 19123
Première édition
2005-08-15
Information géographique — Schéma de
la géométrie et des fonctions de
couverture
Geographic information — Schema for coverage geometry and
functions
Numéro de référence
©
ISO 2005
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

DOCUMENT PROTÉGÉ PAR COPYRIGHT

©  ISO 2005
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Version française parue en 2008
Publié en Suisse
ii © ISO 2005 – Tous droits réservés

Sommaire Page
Avant-propos. v
Introduction . vi
1 Domaine d'application.1
2 Conformité.1
3 Références normatives .2
4 Termes, définitions, termes abrégés et notation.2
4.1 Termes et définitions.2
4.2 Abréviations .7
4.3 Notation .7
5 Caractéristiques fondamentales des couvertures .8
5.1 Contexte des couvertures.8
5.2 Schéma de couverture .9
5.3 CV_Coverage.10
5.4 CV_DomainObject.13
5.5 CV_AttributeValues .13
5.6 CV_CommonPointRule .14
5.7 CV_DiscreteCoverage .14
5.8 CV_GeometryValuePair.15
5.9 CV_ContinuousCoverage .16
5.10 CV_ValueObject .17
5.11 CV_InterpolationMethod .18
5.12 Sous-classes de CV_ContinuousCoverage .18
6 Couvertures discrètes.19
6.1 Types de couvertures discrètes.19
6.2 CV_DiscretePointCoverage .19
6.3 CV_PointValuePair.20
6.4 CV_DiscreteGridPointCoverage.20
6.5 CV_GridPointValuePair .21
6.6 CV_DiscreteCurveCoverage.21
6.7 CV_CurveValuePair .22
6.8 CV_DiscreteSurfaceCoverage .22
6.9 CV_SurfaceValuePair .24
6.10 CV_DiscreteSolidCoverage .24
6.11 CV_SolidValuePair.24
7 Couverture par polygones de Thiessen .25
7.1 Réseaux de polygones de Thiessen.25
7.2 CV_ThiessenPolygonCoverage.25
7.3 CV_ThiessenValuePolygon .27
8 Couvertures en grilles quadrilatérales .27
8.1 Généralités .27
8.2 Géométrie de la grille quadrilatérale.27
8.3 CV_Grid.30
8.4 CV_GridEnvelope.32
8.5 CV_GridPoint.32
8.6 CV_GridCoordinate.33
8.7 CV_GridCell .33
8.8 CV_Footprint .33
8.9 CV_RectifiedGrid .34
8.10 CV_ReferenceableGrid . 35
8.11 CV_ContinousQuadrilateralGridCoverage . 36
8.12 CV_GridValueCell. 37
8.13 CV_GridPointValuePair . 37
8.14 CV_GridValuesMatrix. 38
8.15 CV_SequenceRule . 39
8.16 CV_SequenceType. 39
9 Couvertures en grilles hexagonales . 39
9.1 Généralités. 39
9.2 CV_HexagonalGridCoverage . 40
9.3 CV_GridValuesMatrix. 41
9.4 CV_ValueHexagon . 42
10 Couvertures en réseau irrégulier de triangles (TIN). 42
10.1 Généralités. 42
10.2 CV_TINCoverage . 43
10.3 CV_ValueTriangle. 44
11 Couvertures par courbes segmentées . 44
11.1 Généralités. 44
11.2 CV_SegmentedCurveCoverage . 45
11.3 CV_ValueCurve . 46
11.4 CV_ValueSegment . 47
11.5 Evaluation . 47
Annexe A (normative) Suite d’essais sommaires . 48
Annexe B (informative) Notation UML . 52
Annexe C (informative) Méthodes d’interpolation. 58
Annexe D (informative) Énumération séquentielle. 62
Bibliographie . 67

iv © ISO 2005 – Tous droits réservés

Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifi
...


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geografske informacije – Shema za geometrijo podatkovnega sloja in funkcijeInformation géographique -- Schéma de la géométrie et des fonctions de couvertureGeographic information -- Schema for coverage geometry and functions35.240.70Uporabniške rešitve IT v znanostiIT applications in scienceICS:Ta slovenski standard je istoveten z:ISO 19123:2005oSIST ISO 19123:2006en01-oktober-2006oSIST ISO 19123:2006SLOVENSKI
STANDARD
Reference numberISO 19123:2005(E)© ISO 2005
INTERNATIONAL STANDARD ISO19123First edition2005-08-15Geographic information — Schema for coverage geometry and functions Information géographique — Schéma de la géométrie et des fonctions de couverture
©
ISO 2005 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2005 – All rights reserved
Abstract test suite.47 Annex B (informative)
UML Notation.51 Annex C (informative)
Interpolation methods.56 Annex D (informative)
Sequential enumeration.60 Bibliography.65
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.