SIST EN ISO 14272:2002

Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000)

++TC forecasts updated (TCforecasts updating exercise.sj 00-11-14)++

Probenmaße und Verfahren für die Kopfzugprüfung and Widerstandspunkt- und Buckelschweißungen mit geprägten Buckeln (ISO 14272:2000)

Diese Internationale Norm beschreibt Probenmaße und das Verfahren der Kopfzugprüfung an Punkt- und Buckelschwei-ßungen an überlappten Blechen aus beliebigen metallischen Werkstoffen der Blechdicke von 0,5 mm bis 3 mm, wobei die Schweißungen einen maximalen Durchmesser von  haben dürfen (t ist die Blechdicke in mm).
Das Ziel der Kopfzugprüfung ist, die Zugkraft zu bestimmen, die die Probe ertragen kann.

Dimensions des éprouvettes et mode opératoire pour l'essai de traction sur éprouvettes en croix des soudures par résistance par points et par bossages (ISO 14272:2000)

Mere preskušancev in postopek za križno natezno preskušanje uporovnih točkovnih in bradavičnih zvarov (ISO 14272:2000)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2002
• Withdrawal Date: 25-May-2016
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 25-May-2016
• Due Date: 17-Jun-2016
• Completion Date: 26-May-2016
• Ref Project: EN ISO 14272:2001 - Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000)

Relations

• Replaced By: SIST EN ISO 14272:2016 - Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2016)
• Effective Date: 01-Jul-2016
• Replaced By: SIST EN ISO 14272:2016 - Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2016)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YQLKProbenmaße und Verfahren für die Kopfzugprüfung and Widerstandspunkt- und Buckelschweißungen mit geprägten Buckeln (ISO 14272:2000)Dimensions des éprouvettes et mode opératoire pour l'essai de traction sur éprouvettes en croix des soudures par résistance par points et par bossages (ISO 14272:2000)Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds (ISO 14272:2000)25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN ISO 14272:2001SIST EN ISO 14272:2002en01-maj-2002SIST EN ISO 14272:2002SLOVENSKI
STANDARD



SIST EN ISO 14272:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14272October 2001ICS 25.160.40English versionSpecimen dimensions and procedure for cross tension testingresistance spot and embossed projection welds (ISO14272:2000)Dimensions des éprouvettes et mode opératoire pourl'essai de traction sur éprouvettes en croix des soudurespar résistance par points et par bossages (ISO14272:2000)Probenmaße und Verfahren für die Kopfzugprüfung andWiderstandspunkt- und Buckelschweißungen mitgeprägten Buckeln (ISO 14272:2000)This European Standard was approved by CEN on 5 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14272:2001 ESIST EN ISO 14272:2002



EN ISO 14272:2001 (E)2CORRECTED 2002-01-02ForewordThe text of the International Standard from Technical Committee IIW has been taken over as aEuropean Standard by Technical Committee CEN/TC 121 "Welding", the secretariat of which is held byDS.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by April 2002, and conflicting national standards shall bewithdrawn at the latest by April 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of thefollowing countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 14272:2000 has been approved by CEN as a EuropeanStandard without any modifications.NOTE
Normative references to International Standards are listed in annex ZA (normative).SIST EN ISO 14272:2002



EN ISO 14272:2001 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of -any of these publicationsapply to this European Standard only when incorporated in it by amendment or revision. For undatedreferences the latest edition of the publication referred to applies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicated by(mod.), the relevant EN/HD applies.PublicationYearTitleENYearISO 7500-11999Metallic materials - Verification ofstatic uniaxial testing machines -Part 1: Tension/compression testingmachinesEN ISO 7500-11999SIST EN ISO 14272:2002



SIST EN ISO 14272:2002



ReferencenumberISO14272:2000(E)©ISO2000INTERNATIONALSTANDARDISO14272Firstedition2000-11-01SpecimendimensionsandprocedureforcrosstensiontestingresistancespotandembossedprojectionweldsDimensionsdeséprouvettesetmodeopératoirepourl'essaidetractionsuréprouvettesencroixdessouduresparrésistanceparpointsetparbossagesSIST EN ISO 14272:2002



ISO14272:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphoto
...