SIST EN ISO 20200:2016
(Main)Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015)
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015)
This International Standard specifies a method of determining the degree of disintegration of plastic
materials when exposed to a laboratory-scale composting environment. The method is not applicable
to the determination of the biodegradability of plastic materials under composting conditions. Further
testing is necessary to be able to claim compostability.
Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter nachgebildeten Kompostierungsbedingungen mittels einer Prüfung im Labormaßstab (ISO 20200:2015)
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Zersetzungsgrades von Kunststoff-materialien fest, die im Labormaßstab einer Kompostierungsumgebung ausgesetzt sind. Das Verfahren gilt nicht für die Bestimmung der biologischen Abbaubarkeit von Kunststoffen unter Kompostierbedingungen. Um die Kompostierbarkeit zu bescheinigen, ist weiteres Prüfen notwendig.
Plastiques - Détermination du degré de désintégration de matériaux plastiques dans des conditions de compostage simulées lors d'un essai de laboratoire (ISO 20200:2015)
ISO 20200:2015 spécifie une méthode de détermination du degré de désintégration de matériaux plastiques exposés à un environnement de compostage en laboratoire. La méthode ne s'applique pas à la détermination de la biodégradabilité des matériaux plastiques dans des conditions de compostage. D'autres essais seront nécessaires pour pouvoir revendiquer la compostabilité.
Polimerni materiali - Ugotavljanje razpada polimernih materialov pri simuliranem kompostiranju v laboratorijskem merilu (ISO 20200:2015)
Ta mednarodni standard določa metodo za ugotavljanje stopnje razpada polimernih materialov pri simuliranem kompostiranju v laboratorijskem merilu. Ta metoda ne velja za ugotavljanje biorazgradljivosti polimernih materialov pri pogojih kompostiranja. Za dokazovanje možnosti kompostiranja so potrebni nadaljnji preskusi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 20200:2016
01-februar-2016
1DGRPHãþD
SIST EN ISO 20200:2005
Polimerni materiali - Ugotavljanje razpada polimernih materialov pri simuliranem
kompostiranju v laboratorijskem merilu (ISO 20200:2015)
Plastics - Determination of the degree of disintegration of plastic materials under
simulated composting conditions in a laboratory-scale test (ISO 20200:2015)
Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter
nachgebildeten Kompostierungsbedingungen mittels einer Prüfung im Labormaßstab
(ISO 20200:2015)
Plastiques - Détermination du degré de désintégration de matériaux plastiques dans des
conditions de compostage simulées lors d'un essai de laboratoire (ISO 20200:2015)
Ta slovenski standard je istoveten z: EN ISO 20200:2015
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 20200:2016 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 20200:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 20200:2016
EN ISO 20200
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 20200:2005
English Version
Plastics - Determination of the degree of disintegration of
plastic materials under simulated composting conditions
in a laboratory-scale test (ISO 20200:2015)
Plastiques - Détermination du degré de désintégration Kunststoffe - Bestimmung des Zersetzungsgrades von
de matériaux plastiques dans des conditions de Kunststoffmaterialien unter nachgebildeten
compostage simulées lors d'un essai de laboratoire Kompostierungsbedingungen mittels einer Prüfung im
(ISO 20200:2015) Labormaßstab (ISO 20200:2015)
This European Standard was approved by CEN on 17 October 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20200:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 20200:2016
EN ISO 20200:2015 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 20200:2016
EN ISO 20200:2015 (E)
European foreword
This document (EN ISO 20200:2015) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 20200:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO
...
SLOVENSKI STANDARD
oSIST prEN ISO 20200:2014
01-februar-2014
Polimerni materiali - Ugotavljanje razpada polimernih materialov pri simuliranem
kompostiranju v laboratorijskem merilu (ISO/DIS 20200:2013)
Plastics - Determination of the degree of disintegration of plastic materials under
simulated composting conditions in a laboratory-scale test (ISO/DIS 20200:2013)
Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter
nachgebildeten Kompostierungsbedingungen mittels einer Prüfung im Labormaßstab
(ISO/DIS 20200:2013)
Plastiques - Détermination du degré de désintégration de matériaux plastiques dans des
conditions de compostage simulées lors d'un essai de laboratoire (ISO/DIS 20200:2013)
Ta slovenski standard je istoveten z: prEN ISO 20200
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN ISO 20200:2014 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 20200:2014
---------------------- Page: 2 ----------------------
oSIST prEN ISO 20200:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20200
ISO/TC 61/SC 5 Secretariat: DIN
Voting begins on: Voting terminates on:
2013-12-19 2014-05-19
Plastics — Determination of the degree of disintegration of
plastic materials under simulated composting conditions
in a laboratory-scale test
Plastiques — Détermination du degré de désintégration de matériaux plastiques dans des conditions de
compostage simulées lors d’un essai de laboratoire
[Revision of first edition (ISO 20200:2004)]
ICS: 83.080.01
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20200:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013
---------------------- Page: 3 ----------------------
oSIST prEN ISO 20200:2014
ISO/DIS 20200:2013(E)
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 20200:2014
ISO/DIS 20200
Contents Page
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.