iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 473:2001/A1:2006

(Amendment)

Non destructive testing - Qualification and certification of NDT personnel - General principles

Non destructive testing - Qualification and certification of NDT personnel - General principles

Modification of the clause 10 "Recertification".

Zerstörungsfreie Prüfung - Qualifizierung und Zertifizierung von Personal der zerstörungsfreien Prüfung - Allgemeine Grundlagen

Essais non destructifs - Qualification et certification du personnel END - Principes généraux

Neporušitveno preskušanje – Kvalificiranje in certificiranje osebja za neporušitvene preiskave – Splošna načela

General Information

Status
Withdrawn
Publication Date
28-Feb-2006
Withdrawal Date
27-Aug-2008
ICS
03.100.30 - Management of human resources
19.100 - Non-destructive testing
Technical Committee
PKG - Testing of metallic materials
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
26-Aug-2008
Due Date
18-Sep-2008
Completion Date
28-Aug-2008
Directive
87/404/EEC - Simple pressure vessels
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/BC/CEN/89/2 - Standardization mandate to CEN concerning supporting standards in the context of pressure vessels
Ref Project
EN 473:2000/A1:2005 - Non destructive testing - Qualification and certification of NDT personnel - General principles

Relations

Replaced By
SIST EN 473:2008 - Non destructive testing - Qualification and certification of NDT personnel - General principles
Effective Date
01-Oct-2008
Amends
SIST EN 473:2001 - Non destructive testing - Qualification and certification of NDT personnel - General principles
Effective Date
22-Dec-2008

Buy Standard

EN 473:2001/A1:2006EN 473:2001/A1:2006
PreviousNext
Amendment
EN 473:2001/A1:2006
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 473:2001/A1:2006
01-marec-2006
1HSRUXãLWYHQRSUHVNXãDQMH±.YDOLILFLUDQMHLQFHUWLILFLUDQMHRVHEMD]D
QHSRUXãLWYHQHSUHLVNDYH±6SORãQDQDþHOD
Non destructive testing - Qualification and certification of NDT personnel - General
principles
Zerstörungsfreie Prüfung - Qualifizierung und Zertifizierung von Personal der
zerstörungsfreien Prüfung - Allgemeine Grundlagen
Essais non destructifs - Qualification et certification du personnel END - Principes
généraux
Ta slovenski standard je istoveten z: EN 473:2000/A1:2005
ICS:
03.100.30 Vodenje ljudi Management of human
resources
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN 473:2001/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 473:2001/A1:2006

---------------------- Page: 2 ----------------------

SIST EN 473:2001/A1:2006
EUROPEAN STANDARD
EN 473:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2005
ICS 19.100

English Version
Non destructive testing - Qualification and certification of NDT
personnel - General principles
Essais non destructifs - Qualification et certification du Zerstörungsfreie Prüfung - Qualifizierung und Zertifizierung
personnel END - Principes généraux von Personal der zerstörungsfreien Prüfung - Allgemeine
Grundlagen
This amendment A1 modifies the European Standard EN 473:2000; it was approved by CEN on 29 August 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 473:2000/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 473:2001/A1:2006
EN 473:2000/A1:2005 (E)
Foreword
This European Standard (EN 473:2000/A1:2005) has been prepared by Technical Committee CEN/TC 138
“Non-destructive testing”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the
latest by April 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.


2

---------------------- Page: 4 ----------------------

SIST EN 473:2001/A1:2006
EN 473:2000/A1:2005 (E)
Replace the content of Clauses 9 "Renewal" and 10 "Recertification" of EN 473:2000 by the following:
9 Renewal
9.1 Upon expiration of the first period of validity and every ten years thereafter, certification may be renewed
by the certification body for a new period of five years on production of:
a) written evidence of a satisfactory visual acuity examination taken within the preceding 12 months;
b) documentary evidence of continued satisfactory work activity without significant interruption (see 3.25) in
the method and sector for which certificate renewal is sought.
9.2 If the subclause 9.1 (b) criterion for renewal is not satisfied, the individual shall be permitted to attempt
recertification.
10 Recertification
10.1 Levels 1 and 2 certificate holders seeking recertification shall meet the criteria of 9.1 (a) and (b) for
renewal and satisfy 10.1.1. In the case of operators carrying out repetitive testing in sectors dealing with mass
products, 10.1.2 may be used instead of 10.1.1; this alternative route will only al
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 9712:2022(Main)
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2022)
EN ISO 9712:2022

This document specifies requirements for the qualification and certification of personnel who perform
industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic testing;
i) ultrasonic testing;
j) visual testing (direct unaided visual tests and visual tests carried out during the application of
another NDT method are excluded).
The system specified in this document is also applicable to other NDT methods or to NDT techniques
within an established NDT method, provided a comprehensive scheme of certification exists and
the NDT method or NDT technique is covered by international, regional or national standards or the
NDT method or the NDT technique has been demonstrated to be effective to the satisfaction of the
certification body.
NOTE 1 The term "industrial" implies the exclusion of applications in the field of medicine.
NOTE 2 CEN/TR 14748 provides guidance on the methodology for qualification of non-destructive tests.
NOTE 3 This document specifies requirements for what are, in effect, third party conformity assessment
schemes. These requirements do not directly apply to conformity assessment by second or first parties, but
relevant parts of this document can be referred to in such arrangements.
NOTE 4 The term “direct unaided visual testing” implies where there is an uninterrupted optical path from
the observer’s eye to the test area and the observer uses no tools or devices (e.g. mirror, endoscope, fibre optic).
NOTE 5 Calculations of strain based on other NDT methods are excluded.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 25107:2020(Main)
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
CEN ISO/TS 25107:2019

This document gives requirements and recommendations for non-destructive testing (NDT) training syllabuses, with the intention of harmonizing and maintaining the general standard of training of NDT personnel for industrial needs. It also establishes the minimum requirements for effective structured training of NDT personnel to ensure eligibility for qualification examinations leading to third-party certification according to recognized standards. In addition to non-destructive testing in general, its guidelines for syllabuses cover acoustic emission testing, eddy current testing, leak testing, magnetic testing, penetrant testing, radiographic testing, ultrasonic testing, visual testing, thermographic testing, and strain gauge testing. ISO/TS 25108 gives requirements and recommendations for NDT training organizations.

  • Technical specification
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 25108:2019(Main)
Non-destructive testing - NDT personnel training organizations (ISO/TS 25108:2018)
CEN ISO/TS 25108:2018

This document gives requirements and recommendations for non-destructive testing (NDT) training
organizations, with the intention of harmonizing and maintaining the general standard of training of
NDT personnel for industrial needs.
It also establishes the minimum requirements for effective structured training of NDT personnel to
ensure eligibility for qualification examinations leading to third-party certification according to
recognized standards.
NOTE ISO/TS 25107 gives requirements and recommendations for NDT training syllabuses intended for
training.

  • Technical specification
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18490:2015(Main)
Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO 18490:2015)
EN ISO 18490:2015

This document specifies the form of the optotype, the test procedure and the acceptance level for near vision acuity of NDT personnel. It also addresses the qualification requirements for personnel permitted to carry out the test.
This standard only addresses near vision acuity under defined conditions similar to those encountered during routine NDT inspection. It does not address an individual’s overall visual acuity and users are advised to consider the need for a general eye examination by specialist medical personnel to ensure general vision acuity is appropriate for job function.
This document does not address colour vision requirements.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 15589:2014(Main)
Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/EC
CEN/TR 15589:2014

CEN/TR 15589 provides a methodology for approval of NDT personnel under the provisions of Directive 97/23/EC, Annex 1, section 3.1.3. The provisions of Guideline 6/13 are detailed herein to ensure a consistent approach and a high level of confidence in the approval of NDT personnel by RTPO’s through widespread adoption of the criteria and approval processes detailed herein. A flow diagram illustrating this methodology is presented in Annex A.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9712:2022(Main)
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2022)
EN ISO 9712:2022

This document specifies requirements for the qualification and certification of personnel who perform
industrial non-destructive testing (NDT) in the following methods.
a) acoustic emission testing;
b) eddy current testing;
c) leak testing (hydraulic pressure tests excluded);
d) magnetic testing;
e) penetrant testing;
f) radiographic testing;
g) strain gauge testing;
h) thermographic testing;
i) ultrasonic testing;
j) visual testing (direct unaided visual tests and visual tests carried out during the application of
another NDT method are excluded).
The system specified in this document is also applicable to other NDT methods or to NDT techniques
within an established NDT method, provided a comprehensive scheme of certification exists and
the NDT method or NDT technique is covered by international, regional or national standards or the
NDT method or the NDT technique has been demonstrated to be effective to the satisfaction of the
certification body.
NOTE 1 The term "industrial" implies the exclusion of applications in the field of medicine.
NOTE 2 CEN/TR 14748 provides guidance on the methodology for qualification of non-destructive tests.
NOTE 3 This document specifies requirements for what are, in effect, third party conformity assessment
schemes. These requirements do not directly apply to conformity assessment by second or first parties, but
relevant parts of this document can be referred to in such arrangements.
NOTE 4 The term “direct unaided visual testing” implies where there is an uninterrupted optical path from
the observer’s eye to the test area and the observer uses no tools or devices (e.g. mirror, endoscope, fibre optic).
NOTE 5 Calculations of strain based on other NDT methods are excluded.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4179:2022(Main)
Aerospace series - Qualification and approval of personnel for non-destructive testing
EN 4179:2021

1.1   Purpose
This document establishes the minimum requirements for the qualification and certification of personnel performing nondestructive testing (NDT), nondestructive inspection (NDI), or nondestructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this document, the term NDT will be used and will be considered equivalent to NDI and NDE.
In Europe, the term "approval" is used to denote a written statement by an employer that an individual has met specific requirements and has operating approval. The term "certification" as defined in 3.2 is used throughout this document as a substitute for the term "approval". Except when otherwise specified in the written practice, certification in accordance with this document includes operating approval.
1.2   Applicability
This document applies to personnel using NDT methods to test and/or accept materials, products, components, assemblies or sub-assemblies. This document also applies to personnel: directly responsible for the technical adequacy of the NDT methods used, who approve NDT procedures and/or work instructions, who audit NDT facilities, or who provide technical NDT support or training.
This document does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3. Personnel performing specialized inspections using certain direct readout instruments as determined by a Level 3 certified in the method, do not require qualification or certification to this document.
1.2.1   Implementation
This document addresses the use of a National Aerospace NDT Board (NANDTB). NANDTBs are only used as specified per Annex C and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS 410 or EN 4179 need not recertify to the requirements of this document until their current certification expires.
1.3   Methods
1.3.1   Common methods
This document contains detailed requirements for the following common NDT methods:
Eddy Current Testing   (ET)
Liquid Penetrant Testing   (PT)
Magnetic Particle Testing   (MT)
Radiographic Testing   (RT)
Thermographic Testing   (IRT)
Ultrasonic Testing   (UT)
1.3.2   Other methods
When invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this document applies to other current and emerging NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, sub-assembly or assembly. Such methods can include, but are not limited to, acoustic emission, neutron radiography, leak testing, holography, and shearography. The requirements for personnel training, experience, and examination for these other methods are established in accordance with 6.4 and are documented by the employer.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    39 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 25107:2020(Main)
Non-destructive testing - NDT training syllabuses (ISO/TS 25107:2019)
CEN ISO/TS 25107:2019

This document gives requirements and recommendations for non-destructive testing (NDT) training syllabuses, with the intention of harmonizing and maintaining the general standard of training of NDT personnel for industrial needs. It also establishes the minimum requirements for effective structured training of NDT personnel to ensure eligibility for qualification examinations leading to third-party certification according to recognized standards. In addition to non-destructive testing in general, its guidelines for syllabuses cover acoustic emission testing, eddy current testing, leak testing, magnetic testing, penetrant testing, radiographic testing, ultrasonic testing, visual testing, thermographic testing, and strain gauge testing. ISO/TS 25108 gives requirements and recommendations for NDT training organizations.

  • Technical specification
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 25108:2019(Main)
Non-destructive testing - NDT personnel training organizations (ISO/TS 25108:2018)
CEN ISO/TS 25108:2018

This document gives requirements and recommendations for non-destructive testing (NDT) training
organizations, with the intention of harmonizing and maintaining the general standard of training of
NDT personnel for industrial needs.
It also establishes the minimum requirements for effective structured training of NDT personnel to
ensure eligibility for qualification examinations leading to third-party certification according to
recognized standards.
NOTE ISO/TS 25107 gives requirements and recommendations for NDT training syllabuses intended for
training.

  • Technical specification
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16729-4:2019(Main)
Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 4: Qualification of personnel for non-destructive testing on rails
EN 16729-4:2018

This part of this European Standard defines the requirements for qualification of the personnel who plan, carry out and supervise non-destructive testing in industrial sector - Railway maintenance infrastructure, on rails in switches, crossings and plain track.
Safety of staff working on or near the railway track is part of the infrastructure manager safety management system and is not part of this standard.
This part of this European Standard applies only to rail profiles meeting the requirements of EN 13674 1 and EN 13674-2.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day