Industrial-Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 23: Lists of Properties (LOP) of actuators for electronic data exchange (IEC 61987-23:2015)

This part of IEC 61987 provides
• Operating Lists of Properties (OLOPs) for the description of the operating parameters and
the collection of requirements for valve actuators,
• Device Lists of Properties (DLOPs) for valve actuators.
The structures of the OLOPs and the DLOPs conform to the general structures defined in
IEC 61987-11 and IEC 61987-21 as well as to the fundamentals for the construction of LOPs
defined in IEC 61987-10. The DLOPs conform additionally with terms defined in IEC 60534-7.
Libraries of properties and of blocks used in the LOPs are listed in Annexes A and B
respectively.

Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 23: Merkmalleisten (ML) für Antriebe für den elektronischen Datenaustausch (IEC 61987-23:2015)

Mesure et commande dans les processus industriels - Structures de données et éléments dans les catalogues d'équipement de processus - Part 23: Listes de Propriétés (LOP) des actionneurs pour l'échange électronique de données (IEC 61987-23:2015)

L'IEC 61987-23:2015 fournit des listes de propriétés fonctionnelles (OLOP) pour la description des paramètres fonctionnels et l'ensemble des exigences pour les actionneurs de vanne, des listes de propriétés d'appareils (DLOP) pour les actionneurs de vanne.

Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 23. del: Seznam lastnosti dajalnikov za elektronsko izmenjavo podatkov (IEC 61987-23:2015)

Ta del standarda IEC 61987 zajema:
• operativne sezname lastnosti (OLOP) za opis operativnih parametrov in zbirko zahtev za ventilske dajalnike;
• sezname lastnosti naprav (DLOP) za ventilske dajalnike.
Strukture OLOP in DLOP so v skladu s splošnimi strukturami, določenimi v standardih IEC 61987-11 in IEC 61987-21, in z osnovami za konstrukcijo LOP-ov, določenimi v standardu IEC 61987-10. DLOP-ji so dodatno v skladu z določili, določenimi v standardu IEC 60534-7. Knjižnice lastnosti in blokov, uporabljenih v LOP-ih, so navedene v dodatkih A in B.

General Information

Status
Published
Publication Date
16-Jun-2016
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jan-2016
Due Date
25-Mar-2016
Completion Date
17-Jun-2016

Buy Standard

Standard
EN 61987-23:2016
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61987-23:2016
01-julij-2016
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 23. del: Seznam lastnosti dajalnikov za elektronsko
izmenjavo podatkov (IEC 61987-23:2015)
Industrial-Process Measurement and Control - Data Structures and Elements in Process
Equipment Catalogues - Part 23: Lists of Properties (LOP) of actuators for electronic
data exchange (IEC 61987-23:2015)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 23: Merkmalleisten (ML) für Antriebe für den elektronischen
Datenaustausch (IEC 61987-23:2015)
Mesure et commande dans les processus industriels - Structures de données et
éléments dans les catalogues d'équipement de processus - Part 23: Listes de Propriétés
(LOP) des actionneurs pour l'échange électronique de données (IEC 61987-23:2015)
Ta slovenski standard je istoveten z: EN 61987-23:2016
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61987-23:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61987-23:2016

---------------------- Page: 2 ----------------------

SIST EN 61987-23:2016


EUROPEAN STANDARD EN 61987-23

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2016
ICS 25.040.40; 01.110; 35.240.50

English Version
Industrial-process measurement and control - Data structures
and elements in process equipment catalogues - Part 23: Lists of
Properties (LOPs) of actuators for electronic data exchange
(IEC 61987-23:2015)
Mesure et commande dans les processus industriels - Industrielle Leittechnik - Datenstrukturen und -elemente in
Structures de données et éléments dans les catalogues Katalogen der Prozessleittechnik - Teil 23: Merkmalleisten
d'équipement de processus - Partie 23: Listes de propriétés (ML) für Antriebe für den elektronischen Datenaustausch
(LOP) des actionneurs pour l'échange électronique de (IEC 61987-23:2015)
données
(IEC 61987-23:2015)
This European Standard was approved by CENELEC on 2015-10-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61987-23:2016 E

---------------------- Page: 3 ----------------------

SIST EN 61987-23:2016
EN 61987-23:2016
European foreword
The text of document 65B/998/FDIS, future edition 1 of IEC 61987-23, prepared by SC 65B
"Measurement and control devices", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61987-23:2016.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-07-20
national level by publication of an identical national
standard or by endorsement
(dow) 2018-10-20
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-23:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60534-7 NOTE Harmonized as EN 60534-7.
IEC 61360-2 NOTE Harmonized as EN 61360-2.
IEC 61360-5 NOTE Harmonized as EN 61360-5.
IEC 61987-1 NOTE Harmonized as EN 61987-1.
IEC 60534-1 NOTE Harmonized as EN 60534-1.
2

---------------------- Page: 4 ----------------------

SIST EN 61987-23:2016
EN 61987-23:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 61360-1 -  Standard data elements types with EN 61360-1 -
associated classification scheme for
electric items -
Part 1: Definitions - Principles and methods
IEC 61987-10 2009 Industrial-process measurement and EN 61987-10 2009
control - Data structures and elements in
process equipment catalogues -
Part 10: Lists of Properties (LOPs) for
Industrial-Process Measurement and
Control for Electronic Data Exchange -
Fundamentals
IEC 61987-11 -  Industrial-process measurement and EN 61987-11 -
control - Data structures and elements in
process equipment catalogues -
Part 11: List of Properties (LOP) of
measuring equipment for electronic data
exchange - Generic structures
IEC 61987-21 2015 Industrial-process measurement and EN 61987-21 2016
control - Data structures and elements in
process equipment catalogues -
Part 21: List of Properties (LOP) of
automated valves for electronic data
exchange - Generic structures

3

---------------------- Page: 5 ----------------------

SIST EN 61987-23:2016

---------------------- Page: 6 ----------------------

SIST EN 61987-23:2016



IEC 61987-23

®


Edition 1.0 2015-09




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Industrial-process measurement and control – Data structures and elements

in process equipment catalogues –

Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange




Mesure et commande dans les processus industriels – Structures de données et

éléments dans les catalogues d’équipement de processus –


Partie 23: Listes de propriétés (LOP) des actionneurs pour l’échange

électronique de données












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 01.110; 25.040.40; 35.240.50 ISBN 978-2-8322-2889-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61987-23:2016
– 2 – IEC 61987-23:2015 © IEC 2015
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General . 7
4.1 Overview. 7
4.2 Depiction of OLOP and DLOPs . 7
Annex A (normative) Operating List of Properties for actuators . 8
Annex B (normative) Device Lists of Properties for different types of valve actuators . 9
B.1 Device LOP for pneumatic linear actuator . 9
B.2 Device LOP for pneumatic rotary actuator . 9
Annex C (normative) Property library . 10
Annex D (normative) Block library for considered device types . 11
Bibliography . 12

---------------------- Page: 8 ----------------------

SIST EN 61987-23:2016
IEC 61987-23:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
DATA STRUCTURES AND ELEMENTS
IN PROCESS EQUIPMENT CATALOGUES –

Part 23: Lists of Properties (LOPs) of actuators
for electronic data exchange

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.