Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method

This standard specifies a method for the determination of the thickness of the lacquer film applied inside cylindrical and conical aluminium tubes. The method is a reference. It can also be used as a reference when calibrating other electronic instruments suitable for determining coating weight thickness by e.g., capacitance measurement by Eddy current. It is applicable to aluminium tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic products. NOTE : Although not specified in this standard there are available suitable automatic film thickness measurement instruments that provide instantaneous results with good accuracy
(< 1 µm).

Packmittel - Aluminiumtuben - Verfahren zur Bestimmung der Dicke des Innenschutzlackes

Dieses Dokument legt ein Verfahren zur Bestimmung der Dicke des Innenschutzlackes bei zylindrischen und konischen Aluminiumtuben fest. Dieses Verfahren gilt als Referenzverfahren. Es kann als Grundlage für die Kalibrierung von anderen elektronischen Geräten zur Lackfilmdickenbestimmung herangezogen werden, deren Arbeitsweise auf einem anderen Prinzip beruht, z. B. auf Kapazitäts- und Wirbelstrommessungen. Dieses Dokument gilt für Aluminiumtuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie von Lebensmitteln und anderen Haushaltsprodukten.
ANMERKUNG   Obwohl in dieser Norm nicht erwähnt, stehen Geräte für die automatische Messung der Schichtdicke zur Verfügung, die sofort Ergebnisse mit hoher Genauigkeit (< 1 µm) liefern.

Emballage - Tubes souples en aluminium - Méthode de détermination de l'épaisseur de vernis intérieur

La présente norme spécifie une méthode de détermination de l’épaisseur du film de vernis appliqué à l’intérieur des tubes en aluminium cylindriques ou coniques. Cette méthode est une méthode de référence. Elle peut également servir de référence lors de l’étalonnage d’autres appareils électroniques appropriés pour la détermination de l’épaisseur du revêtement par exemple selon la méthode de mesure de capacité par courants de Foucault. Elle s’applique aux tubes en aluminium utilisés pour le conditionnement de produits pharmaceutiques, produits cosmétiques, produits d’hygiène, ainsi que de produits alimentaires et d’autres produits domestiques et industriels.
NOTE   Même s’ils ne sont pas spécifiés dans la présente norme, d’autres appareils de mesure automatique de l’épaisseur du film sont disponibles. Ils fournissent des résultats instantanés avec une bonne précision (< 1 μm).

Embalaža - Prožne aluminijaste tube - Metoda za merjenje debeline notranjega laka

General Information

Status
Published
Public Enquiry End Date
14-Aug-2007
Publication Date
12-Oct-2009
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Oct-2009
Due Date
17-Dec-2009
Completion Date
13-Oct-2009

RELATIONS

Buy Standard

Standard
SIST EN 13048:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Prožne aluminijaste tube - Metoda za merjenje debeline notranjega lakaPackmittel - Aluminiumtuben - Verfahren zur Bestimmung der Dicke des InnenschutzlackesEmballage - Tubes souples en aluminium - Méthode de détermination de l'épaisseur de vernis intérieurPackaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method77.150.10Aluminijski izdelkiAluminium products55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 13048:2009SIST EN 13048:2009en,fr,de01-november-2009SIST EN 13048:2009SLOVENSKI

STANDARDSIST EN 13048:20011DGRPHãþD
SIST EN 13048:2009

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13048April 2009ICS 55.120Supersedes EN 13048:2000

English VersionPackaging - Flexible aluminium tubes - Internal lacquer filmthickness measurement methodEmballage - Tubes souples en aluminium - Méthode dedétermination de l'épaisseur de vernis intérieurPackmittel - Aluminiumtuben - Verfahren zur Bestimmungder Dicke des InnenschutzlackesThis European Standard was approved by CEN on 21 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:

Avenue Marnix 17,

B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13048:2009: ESIST EN 13048:2009

EN 13048:2009 (E) 2 Contents Page Foreword ............................................................................................................................................................. 3 1 Scope ........................................................................................................................................................... 4 2 Normative references ................................................................................................................................. 4 3 Terms and definitions ................................................................................................................................ 4 4 Principle ....................................................................................................................................................... 4 5 Apparatus .................................................................................................................................................... 4 6 Method ......................................................................................................................................................... 5 7 Test report ................................................................................................................................................... 6

SIST EN 13048:2009

EN 13048:2009 (E) 3 Foreword This document (EN 13048:2009) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13048:2000. It is based on the professional recommendations of the European Tube Manufacturers Association (ETMA) According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cypr

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.